Dinkle Solar Combiner DK10N 10 Gang Box Connector DIN Rail Terminal Blocks, 6AWG, 60 Amp, 600V
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Without a doubt. A red jumper bar appears when you press the red button An ordinary screwdriver can be used to pop out the flathead screws. Once you have 10 blocks, you can move them around. Please accept our warmest regards from Clayton L. of International
A pair of Dinkle SS2 end brackets are included in this combiner. These two short blocks at either end are what those two longer blocks are. I wish you the very best, Clayton from international connector, inc.
It is true that some of our customers cut our jumpers for this reason (the red bar in the middle that can be pryed out). Then that would be a good idea. There is a certain loss of finger safety, so just keep that in mind. Our assembly kit costs a few dollars more, but I would recommend it highly. As far as I can tell, it will do everything that you need. Click on the link below for more information. The following link Visit http//www. The Amazon website. Go to www.Dinkle.com/Dinkle- The assembly line A jumper - The terminal - Does Blocks/dp/B07TN3RLYZ/ref=sr_1_1 work? Dchild=1 & & Assembly+kit+DK10N+red+black and Id 15901039957 & Item number 8- Thank you, Clayton I/C International Connector, Inc. The very best, Clayton
Selected User Reviews For Dinkle Solar Combiner DK10N 10 Gang Box Connector DIN Rail Terminal Blocks, 6AWG, 60 Amp, 600V
No matter how much I like this box, I probably won't be able to use it in the way I had originally thought. had the idea that I could use it as a bus on either side, one for positive and one for negative. )
I bought it with the intention of connecting several solar panels in parallel, with negative leads on one side and positive leads on the other. Despite the fact that the rows are arranged in pairs, they are still The behavior may be typical for a combiner box, but I was not aware of I was surprised to discover that each row is connected to the one before it, as well as to the one after it, by default. All of the rows are connected through a red colored bridge in the middle, which can be removed with a flat head screwdriver. This means, by default, that each connector is a part of every single row and its counterpart (on either side of it). It is possible that the seller should not have attached the red bar referred to by the seller as push pins or a jumper bar, before shipping the unit. With it pulled out, each row is independent, but remember to keep these things in mind As of this writing, both sides of each row are The conventional sense of this is that it would be incredible for a combiner box. lead on the other side. The plan was to then feed a one-wire positive lead as well as a one-wire negative lead In a temporary closed circuit, I temporarily subjected one or both panels. Thanks to the help of my friends, I discovered what was happening. It would have been better if I had been given better instructions.
The seller has been great. The entire experience is worth the price. In the midst of watching endless YouTube videos, we found this item on Amazon, after watching no other suggestions. The purpose of this purchase was to construct a parallel wired solar system for our RV roof top. Item arrived quickly. The product is sturdy and well-constructed in a way that works well for our purposes. Shipping was very fast. Having the Seller as a partner is a great decision. left him a brief phone message with some questions, and he returned our call immediately. Presented a lot of useful information. To replace the red strip, we cut it in half, cut it in half again, and reinserted it on the other side of the channel. In the picture, it is hard to tell, but the red top strip of the board runs in one of two channels. On one channel, we used half each of the stripe, on the other channel we used the other half of the red stripe. I found it to be a great solution. We completed all of this work two weeks ago and all is going well.
After having tried to mess with soldering wires and nut and bolt connections in the past to connect multiple solar power wire leads, you will really appreciate how easy it is to screw the clamp into any connector on the unit and plug in just any size wire (up to 6AWG). It is easy to reach the screw heads with a power head screw driver that is set at a torque rating that will not exceed the screw heads' tensile strength. The two of these made it very convenient, fast, and easy for me to move the wiring around during the transition from solar panels to their permanent location, and I really appreciated how easy, reliable, and quick it is to move the wires around. A positive and a negative wire were connected to each and the positive and negative wire to the other. I find the 60 amp capacity to be a big plus, since I won't be driving more than 40 amps during peak Also, make sure you do not exceed 60 amps with your system and if so, simply buy two of these per pole and distribute the wires equally between the two to ensure you can handle.
Excellent quality and great price. The two of these sold to me were intended for the wiring of my solar panel, battery, charge controller, and inverter. These were excellent quality and each came with a DIN rail, which surprised me. I cut the single jumper to the required size with a ban saw so that I could remove it. Thus, you can separate the blocks so that you have five blocks for positive and five blocks for negative. The single jumper can be very difficult to remove since it is so tightly fitted. The easiest way to do it is to remove the blocks from the DIN rail as a unit, and then you can remove one block from the jumper at a time. At the end, you will be able to pick up the jumper. In this instance, you can adjust the blocks on the rails as you like, cut the jumper to the size you want, then reinstall it.
It's a pleasure to leave a 5 star review for such Communication is good, and the personal touch is important. A combination like this is perfect in most applications. Some Dinkle units were complained of not doing a good job gripping 10g wire. A wide array of connection points and a strong grip on the wire were found, and I also disconnected and reconnected multiple This unit poses one major problem the possibility that it needs to be modified in any way. It was impossible to find a combiner that offered the gauge and two separate rails for plus and minus that I was looking for. Another reviewer claims the seller said it would be possible to cut the shunt rail to modify the item. That seller was not easy to deal with, but I'm not sure if it was the same one. When less than a certain amount of force is applied, the plastic will bend and break. There should be an easy means to remove the shunt rail, but there isn't one. My ability to take the unit apart was only possible after I caused a considerable amount of damage to there was a great deal of care that had to be taken not to I no longer had to struggle with it once it was removed. As a whole, the unit is excellent and highly recommended as long as it is used regularly.
It is easy to install and use inside a waterproof These are the two hooks I bought, one for my solar panels, and the other for my back-up power Installation of an up-close camera. Because there is only one jumper with the combiner, if you want to use a positive and a negative you will have to get extra jumpers or cut the one that's enclosed.
Related Products For Dinkle Solar Combiner DK10N 10 Gang Box Connector DIN Rail Terminal Blocks, 6AWG, 60 Amp, 600V
