Morris Products Black Insulated 2 Conductor Connector – 2-14 Wire Range, Slotted Allen Hex – 1.15”L x 1.50”W x 1.42”H – Single Side Entry – Pre-Filled, Easy Entry, Rubber Vinyl Coating, 600 Volt
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In that case, you need this. It would be helpful to have a big junction box for them since they are indeed large. Ground wires do not need to be insulated, so my guess would be to use a split bolt or small metal bar. Home improvement big box stores carry this product. It would be more economical to buy only two of these, and add a split bolt, which would save some money and space. Ensure that the split bolts you use are aluminium rated as well if the wiring is aluminum.
The general rule is to add 1/16 of an inch to the insulation diameter of the set screw. An average torque range is better than a specific Getting a good bite on the set screw and bare down are my two crucial steps to successful installation. After securing conductors with a few wraps of quality tape about an inch from connectors, we usually finish up by securing conductors with some duct tape.
The answer is yes. I am very happy with the product. The building is well constructed.
In fact, they will work for aluminium 2/0. The rating can go all the way In addition to these, I'd be happy to answer any further questions.
Selected User Reviews For Morris Products Black Insulated 2 Conductor Connector – 2-14 Wire Range, Slotted Allen Hex – 1.15”L x 1.50”W x 1.42”H – Single Side Entry – Pre-Filled, Easy Entry, Rubber Vinyl Coating, 600 Volt
It was high quality, great price, and it done exactly what it was You will save a great deal over buying electrical supplies from a store! The next time I need this, I will order it again.
AlumiConn connectors would be a good choice, he said. When I had written to ask whether they had any special instructions on their website, they returned the four I bought.
Two of the four were ordered For an 8x8 can, we used a 14AWG connector for a 100A 480V circuit so that splicing #3 would be easy. My usual solution would be to buy these connectors from a parts supply store, but Amazon had them in stock and was ready to deliver the My first stop on the Morris Products website was to find a cut sheet and to make sure it was UL-listed and rated for what I needed. The only thing that is confusing is that for 4-plus I don't know which thing to use. The 14th and 2nd As for product 14 in the listing, it describes the screw as a "slotted allen hex", but in reality, it is a slotted set screw, not an In any case, the cut sheet looks like it is straight from Morris Products.
A line or load cable end is spliced into an angle along with its cable ends, allowing them to lie and deadend. In the box, place the two ends together. Since there was no cut-off date I decided to take a chance As far as I could tell, the design configuration of away graphics was in accordance with my expectations. Due to the slotted set screws, we would have liked hex screws, but they are slotted, so we are glad that they come pre-wrapped It comes with anti-theft software Utilization of antioxidants to optimize contact conditions once the machined bores have been lubricated.
These were efficient for my project. The 6 gauge wires are being extended. Covering the screw holes with the caps is a little loose, but not excessively so. secured them with electrical tape to make sure they weren't able to come loose. There's only one thing I don't like about the item the description led me to think the set screws would be allen(hex)/slot type. They're only slot type. However, if they were to be close, that would have been a problem. There was a slight twist on the screwdriver tip of my Craftsman. When you factor in the wire things and the size of these things, they can be bulky but I had no trouble getting four into a 2-liter Box for gang members.
The design is well done. A wire reducer was what I used in this situation. In a home wiring project, I needed to splice 1/0 aluminum feeder wire to 2 ga copper wire in order to connect it to my breaker (1/0 is generally incompatible with breaker boxes). This worked fine for me. Despite their unattractive appearance, these things are very well made and clamp tightly on the wire. I bought the style with Allen head sockets for the clamping screws and am quite pleased with my purchase. It is the seller's opinion that the only improvement needed to be made is to manufacture a style that matches its own In this way, one of the ports will be on the new side, and the other will be on the opposite side so you can splice the wires in-line.
I originally planned on using split bolts to connect these two 4AWG cables, and wrapping them in different types After discovering these gems, I had to share them with you! I have made my life 10 times easier because of this. As part of the package, they include an oxide inhibitor The form is filled out. The only thing you need to do is strip your wire and insert it into this. Reusable and can be easily adjusted, they are ideal for outdoor use. Using them, you can connect 2 wires of large gauge in no time at all. The best I have ever used!.
I prefer using them over wire nuts because they're so much better, they're easy to install, first loosen the set screw, then they go on the wires, and they're finished. In addition to electrical tape, I wrap my gifts with it. The only complaint I had is finding the flat blade screw in tight spaces was difficult, Torx or Allen would have been nice. I used this to connect 6 gauge wire to an oven that came with it. I prefer this over a wing, particularly with this size of wire, because it gives me piece of mind.
Related Products For Morris Products Black Insulated 2 Conductor Connector – 2-14 Wire Range, Slotted Allen Hex – 1.15”L x 1.50”W x 1.42”H – Single Side Entry – Pre-Filled, Easy Entry, Rubber Vinyl Coating, 600 Volt
