Taiss Universal Changeover Switch 20A 550V 3 Position 12 Terminals Latching Rotary Cam Selector Switch + SV2-4s Blue Connection Terminal LW26-20/3
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You have to make sure that the specs for trolling motors are correct, as they can draw a lot of power
Yes, I agree. The LEDs in the unit are hooked up. Prior to the second set of LEDs coming on, a break is taken.
Selected User Reviews For Taiss Universal Changeover Switch 20A 550V 3 Position 12 Terminals Latching Rotary Cam Selector Switch + SV2-4s Blue Connection Terminal LW26-20/3
This is based on my own experience after I disassembled mine. I would not advise you to do this. A 5 channel switch was available to me.
In this case, you can wire it so that secondary terminals come towards the load side and main terminals go toward the line side. Position The number 5 is 2 The six, nine, and ten In Position 0 you will find the following information The four and the seven.
Here's what I just got in the mail. My first step was to check all connections for continuity It is somewhat suspect that continuity will exist on pin 11 in position 3. It takes a bit of probing and cleaning to get the contacts on the pins back to normal, but the DVM still shows contact, so it is unlikely to This deal appears to be good if it works, but never forget to test the pins!.
I needed a switch to replace one that had broken on my skid steer. This switch is more than what I was looking for, and is much larger than what I expected. But it works perfectly, if I understand the size correctly. If you swap 2 sets of these terminals, you can use this as a double pole switch or leave some of them empty to use it as a single pole It was OK with me to pay the extra since the price was so great. It comes with all of the terminal connections needed and is easy to install if you have the space. There is no doubt that it will last forever.
This switch looks really nice. As I tried to remove one set of contacts, I found that it was a spring-loaded assembly I think the trap is loaded. As I began disassembling the contacts, it became obvious that they are no better than a 5 amp pilot duty switch, not as high as the 20 amp rating advertised. The good thing about this switch is it is one of the few affordable switches which can be removed from the circuit without having to remove the front panel. The contacts are still a question mark because I am still thinking about whether or not I will use it.
If you're not sure which one to order, you can order the one you need. It will never be the same after taking it apart. I did it and it won't be the same after.
Despite the fact that the switch works properly, there are no wiring diagrams and this made installation difficult. My rating for this product would have been five stars if the wiring diagram had been included.