"American Zettler, Inc. AZ2280-1A-120AF RELAY; POWER; MINIATURE; 30A; SPST; 120VAC; 1 FORM A; SEALED"
Score By Feature
OveReview Final Score
Questions & Answers
Do not think this is a 12VDC coil controlling 120VAC like I did and purchase this item thinking it controls This is the exact opposite, a 12VAC coil, and a 12VDC switch.
The following dimensions were measured Flanges used for mounting The relay body is 975 mm and the axis is the same A relay body 1 of the 264" relay is used. It is 70" wide and 1" tall. The height of this object is 90". In the mounting holes, you will find The ID is 1360", which is Featuring a 44" central channel Click here to read the whole message. A fast-on terminal is one which is able to boot in under 20 seconds A contact measures 1/4 inch, while a coil measures 3/16 inch
I am sorry, but I do not know anything about that
Please let me know if this is the right thing. Connectors used for Female Quick Connect are Female Quick Connect Terminals.
Selected User Reviews For "American Zettler, Inc. AZ2280-1A-120AF RELAY; POWER; MINIATURE; 30A; SPST; 120VAC; 1 FORM A; SEALED"
If you get these to replace the wood water heaters don't forget that they are 28 volts and not 12 volts. There is a problem with the 12volt relay on the ATWOOD water heater. It was total waste of time as I put them in the stock and did not notice they were 28v relays until I went to use them. I will have to pay for the two relays as no Zettler relays are listed as 12v so search elsewhere.
Taking a look at this small relay is what we're going to do. As I wanted the ability to control my fireplace with Alexa, I looked into adding the Alexa app. One would think that someone would make a relay switch with a mechanical secondary connector, but they don't. You will need a smart switch and a relay in order to make your gas fireplace smart. Normally-open relay that requires a 120V signal to close a (theoretically 12V) normally-open device The terminal is open. It is possible to use two types of terminals A pair of numbers followed by "187" This is 25" tall. You need to make sure you are purchasing the right item. Unless this relay is quiet, it will not be quiet. There is a noticeable thunk from it. Even so, it doesn't seem to be a scam, as it does as it says.
The relay is very simple. This product does what it claims. Wiring a 120v coil to 110vac house wiring and shorting the remaining pins is all that is needed to operate it. Describe the proper way to operate a relay. This can be used to control a 12v circuit at 120v through a.
I used the switching device to switch the 120V to the fireplace since it does not require that. A small enough size to fit in the switch box behind the wall Connect the spade connectors to the terminals using the spade connectors.
I was going to buy that expensive part, but I decided not to. There was a bad relay in the golf cart battery charger, and I traced the problem to it. I was able to save money by purchasing this inexpensive part instead of an expensive new.
Our Kenmore vacuum was missing its relay, so we replaced it. The VAC works perfectly. I love it, so I was happy to find out that W3E fixed it.
I have no complaints at all.