3M Dual Lock Reclosable Fasteners Heavy Duty Industrial Use Clear TB3560 1" x 10 ft Mated Strip Indoor/Outdoor Use Great for Metal, Glass, Acrylic, PC, ABS
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In this case, I would have to say no, because the low profile that I purchased specifically said in the name of the product that it was low profile, and I do not see that here. The one that has the exact words in the description is the one you should choose. TB4570 is the part number I am fairly sure of. No matter what product you choose, you will be delighted! There has never been a grip and a hold like this! I wish you luck, and hope this
Two roles of recloseable Dual Lock come together in the TB 3560 250/250 system, which is a medium level of hold in Taking advantage of its ability to mate with itself, it is capable of creating very strong bonds. There is one TYB 3561 400/170 set with a slightly stronger hold, and the alternative must be paired up with its counter part. Dual locks are classified by how many latching points are in a square inch, so 250 is 250 and can be matched with Furthermore, the 400 and the 170 cannot be mated to each other. It is essential that they are mated so that the bond may be stronger.
Velcro allows it to attach/hook to itself, and it is quite strong! It is ten feet long, it has no dedicated hook side, yet it is quite strong! You would cut a total of 8" of wood so that you could cut two by 4" sections. If you need an inch section, you would cut it in half sticking the two pieces together.
It shouldn't be a problem to fix a wall made of plaster or drywall. My outdoor light was attached to it (on the exterior wall of my house) and it was holding Thereafter, the bottom tape had to be replaced with new bottom tape, but it adheres
Selected User Reviews For 3M Dual Lock Reclosable Fasteners Heavy Duty Industrial Use Clear TB3560 1" x 10 ft Mated Strip Indoor/Outdoor Use Great for Metal, Glass, Acrylic, PC, ABS
It is very hot in Florida, so these are good for hanging screens. In the instructions, it states that the adhesion area needs to be cleaned (spec sheets state that isophryl alcohol should be used). The only tab that did not adhere was one It was a section of the house I did not wipe down after cleaning with alcohol. Reapply paint after cleaning and recleaning There was no problem with the dual lock. It takes no time at all for the adhesive to take effect If it touches where you don't want it to, make sure it is where you want it. We've had full sun for more than 8 hours each day for the past two months in Florida, and the dual lock is still functional.
The error is The representative. My order included a single strip of 10 ft Dual Lock in a box. This is not a pair it is not mated. Several strips are arranged in parallel.
You can cut this 2" strip of 3M Dual Lock and mate it with the other pieces, but this makes it a 5-foot piece This pair is mated at the feet.
I think this is an excellent product if it is used in its intended manner. Using a 3M data sheet, you will see it is designed solely for adhering to glass, but the data sheet also tells you you can use it for adhering polyethylene and polypropylene with primer before applying it.
It's better than Velcro. I use it all the time. Compared to the old fastener, this one is more secure. In storage and on the intended surface, the adhesive on the rolls appears to last for a long time. Unlike the previous rolls, this one was new as they had been used Both sides of these strips are identical, and they can be cut to desired lengths by cutting them.
This is a nice alternative to hooks and loops You can use hook-and-loop (velcro) for rigid applications where durability and positive engagement are required. You can think of it as a strip of tiny legos that 'plug' rather than a strip of burrs. In addition to This has a very positive placement, and little jiggle when it's placed. No matter which item is on the outside or on the inside, the system stays connected regardless of what it's holding. A loop side means more wear and tear as more cycles are done. An attached hook side means no clothing catching.
It is not as loud as a hooked style.
Cons There are a few differences between it and the adhesive, including that it's not as pliable as Velcro, so you can't bend it as tightly as Velcro, and that it loses its hold if it's flexed
The amount of force required to engage is greater. Instead of just slapping it on, you need to press it perpendicular to the surface.
I'm still reeling from that! There is a lot of strength in these things. After using a heat gun to loosen the adhesive, some paint came off my wall when I was trying to take them down. I have to be very careful when I remove the objects I hung on the wall with these because I could end up making a hole in it.
Despite my extensive trial and error, I have found that 3M dual lock is the very best fastener. Unlike others, this adhesive sticks to things other adhesives won't, and the strips lock together more firmly and securely than any other velcro. When I saw the Amazon deal, I immediately snapped it up. I normally buy small packs of four 3 inch strips (a foot total) for about 6 dollars. With a 25 dollar price tag, I figured a 10 foot roll would be more economical. When I found out that I didn't read well, and that these are actually eight mated 10 foot rolls, I was stunned! This is the equivalent of 160 feet of dual lock for just $25! My favorite thing about dual lock is that it is 100% safe and I'm completely satisfied with it, however I was just surprised that it was so much for this price. It's a great deal, but it's so much that I don't know where I will store it all!.
Earlier this year, I used it to attach a couple of shims to a double-sided game board There is a vent on the side of this window that houses my portable AC. By using the shims, the window can't be raised from the outside, but by using the fastener, the shims can be easily removed to allow the window to be opened It is easy to cut either horizontally or vertically (I often cut it in half lengthwise to make it thinner and longer). There is one point to be made The two bolts are about 1/8 of an inch thick when they are fastened together. When you need to fasten something that requires little clearance (like a picture frame, etc. An object that is light or water-based Unless this is tight), this is a bad.
Related Products For 3M Dual Lock Reclosable Fasteners Heavy Duty Industrial Use Clear TB3560 1" x 10 ft Mated Strip Indoor/Outdoor Use Great for Metal, Glass, Acrylic, PC, ABS
