TZAMLI 10-Tier shoe rack Over The Door Shoe Organizer Hanging Shoe Storage Shelf Customized Strong Metal Hooks for Closet (black, 10 Tier)
Score By Feature
OveReview Final Score
Questions & Answers
The shoe rack consists of ten shelves and there are about three pairs of shoes on each shelf. Although I am very happy with the product, the instructions could have been clearer.
Neither the best nor the worst, but it could be placed in the top notch category.
It is approximately 20 1/4 inches long.
Selected User Reviews For TZAMLI 10-Tier shoe rack Over The Door Shoe Organizer Hanging Shoe Storage Shelf Customized Strong Metal Hooks for Closet (black, 10 Tier)
You only need the 'S' shaped piece of the door mounting hardware to mount it on the wall the rest comes in two pieces. In my opinion, that's the best way to do There was no way I could close my coat closet door with it.
According to the orientation of the door you want this to hang on, the overhang may or may not be needed Here's the thing Close the door without the door hooks to prevent them from getting in the way. There is an awkward way of assembling the spokes so all of them hang from one side, but overall it seems to have good quality and should fit many As the hooks bump into the door frame, I cannot close my closet door and I will be moving back, but I would stay if it weren't for that.
It is not necessary to have a child you will not be able to wear your shoes It will instead fit only half a shoe on the shelf and the other half will be hanging from it. The size 10 of my husband is his usual size. His shoes are so far off that they hang We haven't lost any of our shoes yet, but if you have a much larger foot, you might not be able to use this (none of our shoes have fallen off). There were minor issues with assembly and the directions were We had to swap the poles around a couple of times before we understood what was going on because the main poles have different kinds of holes. Additionally, you will have to exert rather a bit of muscular effort in order to force the pieces together - but that's not a bad thing! Despite being made of sturdy plastic, this shoe rack should last for a long time. I prefer this over the ones with pockets, but I wish the shelves were slightly wider (front to back) so that the shoes would stay put more reliably.
Rather than the hooks shown in the picture, this came with completely different types of hooks. This will not work inside a closet door because the garbage they sent me prevents the door from closing. As Amazon's products worsen, customers are faced with a worse and worse experience.
Since there are no rivets inside the middle bars, they have to be screwed in with brute force, so the screws basically have to go through the A bad assembly problem (screws was not able to go all the way in making the bars wobbly) took me only a few minutes to solve before I got a blister on my hand. I would not recommend it.
POS on Amazon I have ever bought is the cheapest I have found. It's a pain in the **** to follow instructions, tedious as hell, warps and bends after you place the door clamps in the frame, and the clamps can't be adjusted after they're inserted. I don't want any plastic pieces that are bound to break and this garbage is even too much for me. My return request for this faulty china crap is being submitted right away!.
The main reason I bought this was because I wanted the option of mounting it on a wall or door and this is one of the few that comes with wall mounting Though I preferred the over door mount, I ended up liking it too. The assembly instructions are shown in the following photos. In order to determine if I had 12 rods, I had to determine whether the instructions indicated that. The rods included 10 and then two with black plastic heads, but each rod was made up of a different set of rods. You do not find any indication that the rods you are looking for will have different heads on them in the instructions. It's unclear where the two rods with shorter heads are supposed to be attached to the netted inserts according to the instructions. You can get a hint if you . . . The net's top and bottom must be found along the very ends. Be sure to remember which two far ends are the real ends. The instructions show the net unit to be assembled with high side up and the curved bars on the side. The whole net was upside down of what was pictured in the instructions, so I flipped it over and assembled it that way. It was simpler to assemble since I was able to lay the side support bars flat as I hooked everything up. In addition, I was not required to have a second person assist me and hold the support bar in place like the instructions indicated. There was a difference in depth when threading screws into the rod inserts through the support bar. As a manufacturer, it was likely that they did not ensure the pre-fabricated parts were up to specification. In addition, that problem means some screws require a lot of torque to completely tighten up. It might seem as if only six of the 24 screw holes are like this, but you'll need some wrist strength or a steady hand to use an electric screwdriver to fully tighten it. It is possible that other reviewers broke down in the following hours. The loose state of the plastic head insert could cause too much weight to be carried on it if the screw is not tightened enough.
If you overtighten the screws make sure you are not damaging the screw. Although I have not tested this, it seemed that overtightening screws could jeopardize the integrity of the outer rod supports, since it would dent, bend, or damage the metal. Last but not least, the top of the rack consists of a raised piece of plastic that slides into the over-door spot or wall It might be able to take some weight and pressure if it were some kind of hardened graphite. However, the plastic is just for show. As time goes on, it will be clear if the effort pays off. As you can see in the second to last photo, this piece is what supports the weight of the shoes. It will be a great loss if this breaks. It would be easier for me to drill a hole in it since the insert is a bit long and enclose it with a metal screw that will fit in the over-the-door This is something I am hoping not to have to do. The design looks great and the build quality is excellent.
It was a bit of a challenge to assemble. To put it mildly, it had to be twisted or pulled hard in order for the poles to click together. I don't think it's good to hang it over the door as the design looks sturdy, but it looks sturdy otherwise. There are weak points in the mechanism, which makes it easy for the whole thing to come off, along with the shoes. There is no problem with the mesh, but it might tear easily when you store those pretty girls During the night The pints are out in In general, this product is ok and the price is fair. There are a few better products out there for a little less money.