There are two kinds of compatibility This wall mount fits most 13 to 30" flat panel displays up to 33lbs flat panel displays with VESA 75x75mm to 100x100mm compatibility. Here are the details A 75x75mm (3"x3"), and a 100x100mm (4"x4") tile is constructed of.
The following positions are fully adjustable You can tilt 15 degrees the chair is 180 degrees swivel and can rotate 360 degrees for better comfort. It offers flexibility in viewing.
The TV is just two inches from the wall to enhance the look of ultra-minimalist décor An LED TV that is very thin. The wall extension extends up to 15" from the wall for space savings.
The installation process The size is 9" x 1". Any vertical wood stud, brick, or concrete wall can be mounted with the 6" wall plate (DO NOT mount directly on drywall).
Included in the package WALI Wall Mount, Hardware Kit, User Manual, 10 Year Warranty Includes 1 x Wall Mount, 10 Year Warranty
Questions & Answers
It is possible to quickly move from portrait to landscape with this, or do tools have to be used?
Be sure you don't tighten it all the way down, and continue to check it frequently. It takes me at least an hour every day to rotate my 23" monitor between landscape and portrait mode. I also abuse the arm by constantly pulling it in and out of its If I need the second monitor, I pull the arm out, remove it so I can talk to someone at my desk, then return it to its place when I am ready to work again, then rotate it to landscape at night when I want to relax and play video games. As soon as I put it away completely at night, the picture is taken back into a portrait orientation. I check and tighten anything that has gotten loose once or twice a year. It is really a nice mount, but since mine is anchored to a solid wall, it is a bit tricky The hutch I have on my desk is made of solid pine, rather than being sunk into the (Yes, I realize this question is old, but maybe it will
There is no 4mm drill bit in my house, nor does anyone I know has one. Could I replace the drill bit with another one that is smaller?
Four millimeters / twenty-five. The answer to this question is 4. This is a #21( however 1574 is the last number. could be used.
Would it be possible to tilt this so it points to the left or right so that a dual-monitor setup could be achieved?
The viewer can rotate and tilt it.
What is the distance between the center of the stud plate and the center of the vesa plate when the stud plate's centers are fully collapsed?
You raise an excellent point. The distance from the center of the vesa plate to the center of the mounting plate is 2 1/2 inches (when fully
Selected User Reviews For WALI TV Wall Mount Articulating LCD Monitor Full Motion 15 inch Extension Arm Tilt Swivel for Most 13 to 30 inch LED TV Flat Panel Screen with VESA up to 100x100mm (1330LM), Black
My R V comes with this mount, which has the WALI Articulating TV LCD Monitor Wall Mount, which I am very pleased with
Having mounted it inside the entertainment cabinet on the side, I have the ability to swing it to either the living room side on the front or the bedroom side includes a very sturdy base that does not sag even when used for long periods of time. Research was done before I bought this mount, and I have to say I am very pleased, both with the product and the price. In my opinion, the mount and the price are excellent.
| May 20, 2021
As far as my expectations were concerned, this product met them
As you can see in the pictures, there is a gap between each bolt and the back of the TV. It is a product that I recommend.
| Apr 01, 2021
I would like to recommend that you use a 10mm drill bit
3. If I had to choose. I'd give it five stars, but I can't do half stars, so I'll give it 4 because it does the job it was bought for, but has some hassles (because it is cheaper than other options. )Used this to mount my child's 22" TV during a room renovation project. It is supplied with two large screws, however these screws have no faces on them, so you will be required to use a socket set instead. The screws are larger than typical screws, but I cannot recall the size off the top of my head. As a result, I had some socket parts left over from a car kit that worked, otherwise this would be much more difficult. Make sure you have one on hand! In terms of the "need" part, since it doesn't have a face, it cannot be used with a power drill, so they want a pre-drilled hole to be punched through it Drilled a hole into which to screw the screw. Because I didn't have one, I used one of my Phillips bits to make a makeshift hole, then powered my way in with a socket to fit it I think it works, but having the drill bit would have made it a lot Nevertheless, it is well-secured, shows well and advertises well. But it is in tight, swivels in all directions and advertises I have not been worried about it dropping the TV, breaking position due to poor screws, or anything else like that, so for that I am satisfied. The only thing you need is a socket set (it will need a small handle or one of those thin arm extensions since the space between the screw and the arm is quite narrow. I did not have one of those extensions, so I did not screw my entire visor into the sleeve all the way, but it is tight enough that there is no worry that it will come The hole is only about an inch or two from fully enclosing the piece. As long as looking good is as important to you as function, you'll want an extension for the socket arm so the device will fit in the space you're using.
There is nothing I would rather do than to be delighted
It is true, however. In other words, the joints that were stiff (as you can read in other reviews) were so stiff that I was worried about returning it. So as an alternative, I sprayed PAM on them and wiggled them, and then wiped off the excess, and this mount was FANTASTIC! I was able to install it without any issues. Unless the supplied hardware is suitable for the location, you might want to consider where you will mount it and get your own hardware. just seems common sense to me. The problem is It might be important to keep in mind the distance used by the mount and monitor. The distance from the mount to the center of the monitor is approximately 30 cm. It is 11 inches long. It means that if my monitor were wider than 23", the mount itself would negatively affect the overall functionality of the fold-back feature. Even so, my monitor is only 17", so I still have two more inches. The distance between the edge of the monitor and the mount is 5".
| Jun 13, 2021
I found this mount to be well worth it for the price
It works very well up to 39”, and is installed well. You can't beat an articulating mount at this price, unless of course it's It's pretty nice that this mount is so It was very easy to identify the contents due to the clear markings. Even so, I think the instructions could have used a little work, so I gave it a 4 instead of It is easily done if you just use the center plate to mount VESA 100x100 or smaller — you just need to align it. In either case, you must install the extending arms if you are using 200x100 or 200x200. It is imperative not to tighten the arms to the Center plate during installation. The bolts should be loose when the arms are placed, then the outer edge should come into contact with the wall mounting points of the television, then the bolts should be tightened at that angle. It is important to have enough play in the arms so the TV mounting points will line up with the arms. I hope you find that helpful in speeding up your installation. I think this product is of good quality. It's not flimsy, but it's also not very It's ideal for light TVs and monitors, and it's low profile looks great!.
| May 07, 2021
Which deal of the year will be the best? It is small, lightweight, portable, and convenient to use It is a simple and affordable wall mount fit for any small or medium This mount helped me take pictures of my 24-megapixel camera My TV stand was taking up a lot of space on my desk, so I decided to remove the 32-inch television (which I use as a second monitor for my computer) from my desk and free it up
It is easy to install the mount as the hardware that comes with it is durable and simple to use. An electric drill is all that's needed. Definitely, I will purchase these in the future. I will also pursue the next size up when I have larger TVs so I can mount them, This mount consists of a dual-swivel bracket system that allows the screen to be configured in an angle that is optimum for the screen They can be adjusted to fit I can put the screen near the wall for projects where I need to see minute detail up close or extend it outward for art projects where I need to see the exact detail of the work. We give it 10/10 and would buy from them.
| Mar 17, 2021