ClosetMaid 1306 Stackable 2 Drawer Horiztonal Organizer, Dark Cherry
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A 23" wide by a 7" high drawer measures 23" long x 7" wide. The cost per unit is $25. The total height of the person is 15 inches. Light duty storage that is perfect for light use. Five wheels are all we have.
SuiteSymphony 25 is a contemporary closet organization system from ClosetMaid. A typical tower has a height of 23 meters. The diameter of this tube is 74 inches. There is no room for this unit.
as per the instructions of the manufacturer, and with weight evenly distributed, it is possible to fit up to 15 pounds on the top shelf.
In short, yes. The answer is yes. This set comes with a dowel for keeping the two pieces For the top one, there is also a cover.
Selected User Reviews For ClosetMaid 1306 Stackable 2 Drawer Horiztonal Organizer, Dark Cherry
A brown and a white pair. The white pair was more expensive than the brown ones, which was frustrating, and the white pair arrived days later than the brown pair. There was no hardware left in the unit (except for the hardware that was in the zip lock bag! The nails were driven in and the plank was nailed to the wall There was already a screw holding the drawer guides into place so some parts had not to be removed Someone partially assembled it, then damaged it and ripped it apart (everything was damaged). Then they put it back in the box & placed it in storage. The package is on its way Never in my life have I seen anything like it As for the other units I ordered, they all arrived just fine and were easy to assemble overall. too small to be worth the $50 price tag attached to a white one, but are worth the $30 price tag attached to a brown one.
I got them for a great price and the perfect size. As I tried to make an odd closet functional in my old house, I found an old door. In reality, I did not want to buy this product and decided to look for something nicer instead. In spite of that, since it has metal drawer slides and I knew that I could make the drawers prettier if I needed to, I bought it. My experience is that drawers with just the groove on the side of the drawer act as a drawer slide. I would not recommend something like that unless the drawers are Drawer slides included with the kit are Rather than use the plastic drawer pulls that come with the drawers, I took the time to replace them. My closet is a small one, so it's easier to use the same size drawer pulls that the ones provided came with. It would seem safer if you bump into the pulls in passing if they are rounded. I was able to fit the exact size of the tables in my space. To reach the doorway from the wall, I had one-and-a-half inch depth, while the distance between the wall and the hanging clothes space was about 25 inches. In total, there are two sets of drawers, each measuring 12 inches in depth and 24 inches wide. The top of each set of drawers is 15 The three sets in all were 47 and 1/2 inches high. I was going to put them on a shoe shelf I already had, but it made it too tall, so I made a single shelf under it and it worked Inside, the measurements are 22 x 23 x 15 The width is 1/2 inch and the length is 10 inches The inside of the container has a depth of 1/4 inch and a height of 6 inches There is a 1/4 inch front and four and a half inches back There is an eighth of an inch between the sides and the Using a hand-held screwdriver will sometimes yield a better result than using a power tool. Starting screws at the correct angle should be done slowly. When rushing, it is possible to start screws too fast, resulting in the hole widening and the laminate coating being removed from the area when the screw slips out of place due to The predrilled holes (larger holes, not those for drawer slides), sides attached to each other and the groove for the drawer bottoms would always get a small amount of glue to add extra strength to the final product. Wipe away glue drips with a damp cloth after use. The bottom of the drawer is essentially cardboard, so don't overwet the cloth because the drawer's bottom groove is broken. In one drawer, the groove was broken under the bottom groove. It was a small area on only one of the six drawers for an item this cheap, and I was happy that it was only a flaw on one of the six Despite the fact that it may have been okay without a fix, I fixed the area.
I will none the less, write a negative review for this product. Three of the parts of the product are missing, which is why it is the worst. The screws that go with this kit are PART D and PART H. A few years later, after having gathered a bunch of them, I read that the unit had to be attached to the There was nothing in the description about that. In that sense, I regard it as We can add $37 to our list of wasted money. As a result of the experience, I would rate it as a negative number of stars. I just want to repeat what I said earlier I am interested. Generally, I get about 100 deliveries per year from Amazon and this is the first time that I have given a.
It did not matter what the items weight, because they fell out of the drawers no matter how light they are. Therefore, adjusting the bottom of the top drawer will not let the bottom drawer close unless the top drawer's bottom is adjusted There are still still so many curves in it that it's only going to be a matter of time before it vanishes completely. This drawer has VERY cheap particle board at the bottom and is not meant to support itself at the bottom, plus the grooves at the sides are not deep enough for it to do so. They should have used flat-head screws instead of the screws they provide you with to attach the drawers. It seems like they should have gone with hexagon-head screws, but they chose round-head screws We're headed. In any case, I am very disappointed in this purchase, and the product does not deserve the high rating it's.