35+ pcs Mix Cassette Rubber Square Belt Cassette Machine for DVD Drive , Xbox 360 , Repair Rebuild Common Square Belt Repair Rebuild
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The seller does not measure any of these belts. There is no belt thicker than one inch. The one you find should be close but very thin, according to my guess.
There are rectangular cross sections on the belts I received. There are about 0 characters. A thickness of 0.04 (*1mm) and a width of Three mm)
A grooved wheel has square stripes that fit into the groove and will not slip. Flat belts will fit onto flat wheels, but if the belt size is not the right size, the belt may slip off, or if it is too tight it will cause the motor to strain.
I am seeking a square belt with a diameter of 1mm that would fit factory installed Toyota car stereos. As soon as I tried playing the tape, I noticed that it wasn't normal, and that the belt was either loose or already attached. It was so small I couldn't fit it in the stereo, so I folded it up, edge to edge The measurement should be taken from the side. Having measured the length of the belt when folded, I can guess that I need one that is close to that size or a little short of that, because the belt I measured had already "stretched.". The explanations I have given should be clear to you.
Selected User Reviews For 35+ pcs Mix Cassette Rubber Square Belt Cassette Machine for DVD Drive , Xbox 360 , Repair Rebuild Common Square Belt Repair Rebuild
A belt from this kit helped me get my DVD player's tray to open and close again, so I'm glad I bought it. The cross member is thinner than 25") and is thinner overall An alternative section has been added A score of 030 is better than a score of Ib 045") So, it is not going to last as long, but for now it is still functioning. Despite its compact size, the kit doesn't contain a great deal of From what I can tell, there are just six different diameters, and then inside each of those groups, all the cross-sections are in the same direction All sections of the report are identical. When compared with the originals from my DVD player, the belts are a bit wimpy. There is a cross-sectional design on the smaller belts This is about a 0th of a section. It is 030". Generally, a belt with a long cross has a wide cross. This is about a 0th of a section. It is 045". There is a 1/4" grid on the graph paper in the attached photo. I am pointing the pencil at the original belt that came with It is clear that none of the belts in the kit are very similar to the originals. I found a pin in the slot on the bottom of my tray assembly on my player. Opening the tray approximately 3/4" with the pin is as simple as sliding it in the slot. If you click on that, you can manually open the tray without forcing it to do so.
A drawer on a Philips CDI-V was repaired by replacing the drive belt The 910 worked perfectly I had spares and replaced every belt in two tape decks, and a walkman I still have plenty of belts of all sizes and by the time the other belts wear out or dry rot, I will also be without these. I just wanted one or two of each size. You get like four or so of each size, and it's really crazy how many you get. There are I believe 30 of them? In other words, if you need a belt of any of these sizes, go for it, there won't be a shortage and it's reasonably priced.
Two old cassette players received four belts that did not need to be replaced as a result of the package. I didn't have any problems finding ones that matched my needs. It appears that the belts are new and fresh, though they are a bit thin compared to originals (read 4 out of 5 stars). The package does not contain crumbling old belts. I was pleasantly surprised with how well they work.
Only problem I had was that I would have liked the belts to be thicker. It wasn't clear from the photo how thick the material was. There are only a few of them. Thinner than a 5mm disc. It might be 0 or perhaps not. The thickness of the paper is 8 It ended up being three belts I used The belt I replaced had about the same thickness as the one I There is nothing elegant about it, but it's effective.
There is an error in the description of the product. It is common for belts to be advertised as square, but they are actually As for the belts, they are extremely thin, perhaps a fraction of the thickness of a standard rubber band. I immediately returned them for a refund, since I needed a square belt for my repair. The product is not a good fit for me.
They were supposed to be a selection of 14 items, but it wasn't as described As stated in the description, the largest belt included in the package is 110mm, however it is only 24mm, which is not useful for me, as I needed smaller belts and they are not included.
Even when the ones that are too large are too large, I still find use for them when I need a substitute for a rubber band, and they are just as good as a rubber band. There is no way one can go wrong with that price.
A belt motor is of small o rings that can be used as a belt Perfectly satisfies, with plenty of extra space It is not the intended purpose for which it was designed, but has value as a spare.