[2 Pack] 14” Anti Glare Anti Scratch Laptop Screen Protector Compatible with HP/DELL/Asus/Acer/Sony/Samsung/Lenovo/Toshiba, Display 16:9
Score By Feature
OveReview Final Score
Questions & Answers
Joe, I just wanted to let you know that this is one of the best products that I have found for use outdoors. The single most important reason I bought it was because of this. The program worked well on my Toshiba laptop and pre-installed on the system I did not need to trim any of the cut pieces you sent. Two pieces are included in the kit. The second piece was used on my wife's tablet (after appropriate trimming) and provided excellent results as well. The one thing I would caution you about is that this is a highly recommended product. Be sure to follow the directions to the T. You will be able to reduce the look of air bubbles if you remove ALL dust, or as much as possible. It will take a bit of time for you to apply According to my opinion, the little tool they use to squeegie out air bubbles does not perform nearly as well as a credit card. that there is no way to collect them all, but with time you get used to them being there, and when used indoors, they are nearly indistinguishable. Hope you'll have a successful week!
In short, yes. The effect of this is to reduce
It is common for laptop screen protectors to include these features In order to use the 16 inch display on a 14 inch device Approximately 312mm x 174mm is the screen protector's size. Before purchasing a new laptop screen, can you please make sure that it fits your laptop? I would be happy to answer any questions you may have. It's great to hear from you.
I have a laptop 15 inches wide that fits on the laptop I use
Selected User Reviews For [2 Pack] 14” Anti Glare Anti Scratch Laptop Screen Protector Compatible with HP/DELL/Asus/Acer/Sony/Samsung/Lenovo/Toshiba, Display 16:9
The best way to ensure that you get the minimum amount of dust is to follow the steps below I. 1. All ceiling fans should be turned off, and all windows should be closed to reduce dust particle movement (including people moving about). 1. *br. For a dust-free screen, clean it thoroughly with an alcohol wipe commonly used for prescription glasses to remove all oils and dust. 1. 2. 3. You may decide to position the provided guides on the left or right side of the screen, whatever side you decide to start with is fine. If you are planning to peel away the first side of the film, be sure to check it one last time for Note *br. Once you have applied the screen, you are ready to start using it. Do not remove the first layer completely, as removing it will result in the air being sucked up by dust particles. The first side needs to be peeled by about 1/2 an inch, and the sides need to be pressed together Make sure that you align the screen cover edge with the edge of the projected screen as closely as possible. You will begin to see a slight stickiness in the screen cover. Keeping it from being picked up too frequently will keep it from breaking. Don't miss the chance to get it right the first time. As soon as you have it lined up and the first half inch is attached, gently peel the first screen off of the bottom layer while using the squeegee to remove most of the air bubbles, you may not be able to get them all, but try your best. As you do this, make sure that the screen protector is completely on during step 1. The seventh point. Rub out more of the air with the squeegee if you weren't able to get to it previously. Still, you will not get all, but you are closer to doing so. The eighth point. You should start removing side 2 really slowly from the corner of the computer and use the squeegee to hold the protector onto The number nine. With the remaining air bubbles removed from side two, you will now use the squeegee to remove any remaining Once you have attached the screen protector, you are done. The HP 360x 14 incher I used for my two home computers, and the HP 14 inch work computer I used for my business. Mirror-like screens were the original ones, but now they are much easier to see as well as no longer strain our necks. The image is seen by bending over and looking in all directions. I did not notice any effect from the touch screen, whether I was using my fingers or a It takes a few minutes to remove them if necessary, and even if they need to be replaced, they come off easily. Just in case you mess up, it's recommended that you buy the 2 pack. It is my hope that this will make everyone's experience easier.
To protect the screen of my new Lenovo Thinkpad 2, I purchased this screen protector The laptop is 1 PC. Due to the touch screen, I knew a screen protector would be needed to keep it scratch free. In addition to that, the display was very glossy and hard to read in sunlight or even under a standard There is a conflict between With the glare screen protector, I've seen no signs of visual distortion at all, and the glare is reduced nicely. There is still a lot of clarity in the text and images, and the screen is much easier to gaze at than it used to be. The screen protector is easy to apply, and I love that there is no glue or adhesive that could damage the screen. I have been able to use it outside in the sun without any problems. As long as you follow the instructions in the package, it is very easy to apply, and it is a two-pack, so I already have a spare on hand in case this one breaks. Moreover, it does not leave fingerprints on the screen once applied! Using a stylus or my finger, I can use the touchscreen with no problem. A glossy screen was constantly covered in fingerprints and smears when using a stylus, but the matte finish of this anti-glare screen kept these marks at bay There are virtually no fingerprints or smudges on this screen protector (which is great for The only reason I did not give this product a 5-star rating is that the sizing is a little small. Whenever it states that it fits a 14" screen, it means 14" and not a millimeter more! If your screen is on, you will have to apply this method while it is on so that you can see exactly where the screen's edge.
You must be careful if you are a perfectionist. Since I'm a perfectionist, installing this was my worst day ever.
I purchased it for my Lenovo T440, so that the keyboard does not scratch a screen if it wears out. In terms of the product itself, it is good, but I had too many expectations. You aren't going to be able to apply this without bubbles if you're not in a clean environment. In reality, the product didn't seem to be the problem, but more a result of the limitations of the physical world. On a small rigid screen, a screen protector can be easily installed without leaving any bubbles behind. In the case of a large screen like this, the size of the protector moving around is enough to produce The most important thing is to keep the room clean. In my particular laptop, the LCD panel doesn't have a strong glass front, so I had trouble getting the bubbles out without damaging the LCD panel. Because I am a perfectionist, I was able to remove all bubbles on my third try. An LCD panel was damaged in the process. It's my fault, I got a decent result on the second try, but I felt like I HAD to do it right. It was easy enough to replace the panel on a Lenovo, so I would just go Here are the GOOD things It's all good. With the exception of my ridiculous expectation that the protector will adhere as flawlessly to the screen as a rigid, tempered glass screen protector, I think this is an outstanding product. I think the matte finish looks indistinguishable from that of I'm sure it will prevent scratches, scuffs, and the keyboard wear marks without a problem. For that reason, I recommend it, provided you don't mind a few tiny specks at the edges. Using wet application would be the way to go if I had it to do over again. I found this method to be the best, and I did my best to utilize it, but my LCD display had already been damaged by multiple attempts. I think this method would give the best results if it is applied carefully.