Drive Logic DL-64-BK Portable EVA Hard Drive Carrying Case Pouch, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Approx. 20 cm deep inside. The dimensions are The size of the print is six by three inches. This is a 5 x 1 inch card. The outside measures approximately 2" x 2". The dimensions are This image measures 7 x 4 inches. This is a 5 x 1 inch card.
A little less than six inches of space is inside the case. There are about 3 inches and 3 inches between the long and the short sides. This bag is 74 inches wide. It is able to fit my 500GB LaCie external, along with its USB cable fitting inside the slot, and its firewire cable fitting into the opening on the outside. This cable sleeve has an elastic band on the outside that is strong enough to hold the cable firmly in place. You should be fine if the external of your eyeball fits within these measurements.
The dimensions are seven inches by four inches. This is a 5 by 1 inch measurement. This is 75 inches long. A 6. case logic has been assigned to me. Four times 25, as well as four times four. The number 58 times one is The fifth eighth. I'm glad to see WD My Passport external HD in such a good size.
This device has a height of 3 inches and a width of 1 inch. A small, 9" by 3" box. The size of the box is 9.5" x 0.0". 9" in height. In terms of internal dimensions, the Drive Logic case is three inches by three inches by two inches. The dimensions are 5 inches x 6 inches. A 0 x 0 square is a square of zero. The number is 9 (approximately).
Selected User Reviews For Drive Logic DL-64-BK Portable EVA Hard Drive Carrying Case Pouch, Black
To go with my WD passport and Toshiba Carnival drives, I bought the Drive logic DL64. There's actually much more storage on this drive than on either of these. It seemed to me that this might prove problematic since the drive might be able to move around in the case, therefore defeating its purpose. In reality, it has very thick padding inside (shown in the pic) which keeps the 2TB drives, which are a little thicker than 1TB, pretty snug. Although the 1TB drives do slant a bit, they aren't particularly noisy. There is quite a bit of room inside for my old LaCie Rugged FW drives, but it would fit better if the cable was in the outside pocket, which is nice to have. The only thing I can think of is that due to its size, it takes up more space in your laptop bag, making your smaller "portable" drive About the same price as the AmazonBasics for My Passport case, I purchased this. In my opinion, that case is better because it has a smaller size and therefore holds both 1TB and 2TB drives more snugly, but it only comes It serves its purpose well for me and I think it provides adequate protection especially for large drives. I have several drives, and I wanted some cases with different colors so I could more easily identify which one was inside. This certainly meets that purpose and I do think it serves that purpose well. Comparisons of the DL 64s (hot pink), the AmazonBasic case (black hard case with blue drive), the WD My Passport carrying case (soft black case), and an old CaseLogic PHCD case (hard case with silver drive) can be found in the photos.
It is spectacular. Well worth the money! I use it to hold my Zendure 10,000 Mah "slim" portable 6x3x is the dimension of the battery pack. It is 60". For me to find the right size and appearance, I must have reviewed at least 100 listings. As I envisaged an open book, I wanted protection, a tight fit, a thin profile, and room to hold my iPhone 7 while it was charging on the other side. My eyes didn't seem to agree with any of them- Many were of poor quality or very expensive. *i did find a few that were decent but the elastic bands on them didn't work. I found a few that were correct size but the bands were smaller than The bad boy I was looking for has finally been found. It was loved by everyone as soon as I read the reviews / dimensions / price. It was such a happy and wonderful surprise. It is a fantastic price and I just took advantage of In fact, it is the best case that I could have asked for. The outside is hard(soft) with a pocket on one side. This pocket surprised me because I was not expecting it to have so much flex. The pocket is very soft and expands quite a bit -I feel it will be useful! With a large, well-made zipper that easily goes around each corner, this zipper is a good buy. There won't be a need to wax it. There do not appear to be any issues with this zipper for the rest of its life. Flimsy is not a word that would describe it. There is no doubt about the quality of this case! Large and secure, the pull tab has a wide opening. There is only one thing that I would change it is single, A great feature is the raised rim around the case and the fact that the seams don't stand out. In other words, this case is truly hard. You can grip it like a hamburger and squeeze it, but it has a very tiny give but never giving up under pressure. It is not hard plastic, but has just the right amount of give. Inside
The inside side A- *1/2" is the thickness of the hole Each one of the pieces is made with high-quality materials and craftsmanship. - The case is covered in soft material, no paddding or memory foam is present. (I would have liked memory foam on both sides)* A nice mesh top with a mesh pocket rim that measures 1/4" wide and is stretchy. The pocket will hold cables so that there is little risk of cables falling out. I think of some possibilities for using my iPhone *My iPhone 7 fits comfortably in my pocket without a cable(limited, but I can put the cable along the edge-- You're at the top. In addition, the case can be closed completely to protect the device while charging and I can use it like a book
***I am able to fold it back on itself without any strain to the binding. "***" - It should be no problem to connect devices with the appropriate type of cable, such as a 90 on each end. In the e-side, we have B-side - Stretchy band that is one inch wide - The bottom is very plush and thick with memory foam which is 1/4" thick, but it is not 100% covered, and there is 1/4" rim (see photo) There is a 3/4" depth to the pocket (deeper than the mesh pocket side) and my battery is exactly 6x3X. A 60" piece of furniture does have slight play so it can move an eighth inch up and down. In width, there is a little more space, with a total of 3/4" of left and right movement. The measurements can be taken in a number of different ways, therefore finding one that perfectly matched the other was challenging. A good fit is important to me. If you're looking for a case that meets your needs, this would be the one. If you purchase or own a Zendure 10,000 mah slim power bank, then you are getting quality all the way. In my opinion, the case is perfect. Zendure is always the best power bank brand!.
A case for a project I was working on caught my attention.
I have just found the perfect power bank for my Amazon power bank, it features Please see https//www. nbsp.