Rybozen USB Switch Selector, KVM Switch Adapter for 4 PC Sharing 3 USB Devices, One-Button Swapping Box Hub for Keyboard, Mouse, Scanner, Printer, Computer, with 4 USB Cables
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A USB switch is what this is. You will not be able to connect it to In HDMI, there is a data line, a clock line, a power line and an HPC line. In USB, there are a data line and a power line. There is a HDMI two. There is an 18 GBP charge for 0 bandwidth. The USB 3 standard was introduced in 2008. There are 400 MBPs in 0 bandwidth. These two technologies are not very compatible, resulting in their incompatibility.
In short, yes. For each number, you need to hit it once. There is no limit to how many people are on the internet
Two of the three questions you posed can be answered by me Clearly the switch is a manual switch - you can see it at the front middle in the photo, and I use it with three computers (my laptop for work, my tower for Windows, In the end I only use it with a keyboard and trackball (mouse), and I do not make use of the third connector on the front. It is impossible for me to tell how a printer would feel about its connection being switched to a different computer and switched back, but I have no idea. There is one problem the four lights across the top (that indicate which computer you are connected to) are rather dim, so I lean forward when I press This is a very minor point, I have no substantial complaints (especially that the product is so expensive).
In short, yes. There is no doubt in my mind that you can do it.
Selected User Reviews For Rybozen USB Switch Selector, KVM Switch Adapter for 4 PC Sharing 3 USB Devices, One-Button Swapping Box Hub for Keyboard, Mouse, Scanner, Printer, Computer, with 4 USB Cables
It has been only a few weeks since the switch was set up and the printer, keyboard, and webcam are switching between computers with great success. There is only one thing that irritates me about the system its ergonomics The LEDs that indicate the amount of processing power are located at the bottom of tiny holes in the top of the enclosure, and can only be seen when one is almost directly looking at Attached photos show the computer set to computer #3 in all three of them. From my seated position, this shows what it looks like from the switch Due to the lack of visibility of the light, it is impossible to guess which channel is selected. In the second photo, a man almost looks like he's wearing By directly addressing In the down-position There is some visibility of the indicator in the it view. There is only one photograph that shows a straight line down on it, and only that one shows it clearly. While I realize this is a minor inconvenience, it would have been alleviated if the choice had been for a larger window or a different LED that could be viewed from an angle instead of having to stand up to verify the selected channel. A star was taken off for that I am satisfied with the rest of.
Two of these were bought, one for the office and one for my In the one at home I have 3 PCs that are connected to a wireless mouse and keyboard, as well as a shared HP portable hard drive. I have two of these at work, one running four PCs to a mouse and keyboard connected by USB cables. In both instances, they work perfectly, and they came with four USB cables of about five feet each. The monitor source can be changed manually by using the source menu on each monitor. A single push of the KVM button allows me to switch between the peripheral devices. As for the only complaint I have, the light on the selector switch is rather dim (see pictures) and sometimes I have to slide the switch out from under the monitor for it to be visible which PC I've.
The printer cables you no longer need can be recycled! A functional approach Windows and Macintosh. The package includes the device, instructions, warranty information, one USB cable, and a USB cable adapter. This device seems to work great, but you will need four USB cables (A to B). All those old printer cables lying around are the perfect opportunity to put them to use. It was great to finally have a use for the old cables I had laying around. This device makes good use of the A-male USB cable that most of these units use. The cables are almost always short, so it makes a great replacement for old printer USB cables My installation cost me under $20 and was perfect. As an added benefit, the program runs flawlessly on Windows 10 and Mac. All the cables should have come with the device and I would have given 5 stars. Those who do not need them won't have to rely on them, but some people It is advisable for the vendor to provide both of these You can either buy a cabled device or a cable-less device. It is important that they offer a bundle that includes cables at a discount to help customers in need. Make it clear on this listing that there is only one cable You can use the information provided in this post to determine if it is the right device for you. The photos will help you to make that decision. Among the Pros The device is low cost, has 18 month warranty (see picture), can recycle old USB cables (no need to buy new ones), and is compatible with Windows and Macintosh (tested). The cons are This item DOES NOT include all cables required for the use of the device.
There is no way to identify which computer is active. Getting a new device to replace an old one that stopped working has been fast and easy. It's not god at first glance, that's my first impression. There is a very weak light that indicates which computer (port) is active, so weak that I am unable to distinguish which If the computer monitor is on, it's only then that I'll know it. Only when I move the mouse will I know that. If I want to see the light of the active port, I have to look at the device perpendicularly (from above). I have to stand up in order to perceive
Another thing that is not good is that there is no way for the device to detect which port contains a cable (computer). Initially, I have only 2 computers, but when I press the "change" button, the computer goes through port 3 and 4 to go back to 1 and 2 (the only ones I use). In conjunction with the fact that I have to stand up from my chair to see which port is active, this is what makes the experience of using it really bad. A picture of- This is the device as I see it from my chair (sat on it). * Picture - When I stand up and look at the device from directly above, I can see it clearly.
The purpose of this simple device is to switch a USB headset between two computers and an NVIDIA Having said that, it does work fine for that purpose. My only complaint is the same as many others have stated, the led lights that are supposed to show you which computer is selected are far too dim to be helpful. It is real. Today, there are many things that are ultra-expensive In order to achieve the brightest possible LED, they first used the smallest, dimmest LED in the universe. It is even worse that these two holes are recessed under the surface of the case, so you can only see them if you look down directly from the top. You won't be able to make any sense of what the indicator is telling you if it is flat on your desk, since you will see no light from any angle. In an effort to sort of solve this issue, I have used two approaches. First of all, since the selector goes round robin, if it is on #2 and I need to select #1, I count the button presses and do so three times (then #3, then #4, then Additionally, if I'm not sure which device is active, I start some audio on the device I want, then tap the button until it is activated. To see if I can direct the light to a viewable angle, I am considering mounting a small mirror upon the switch. It might be worth a try, but I have no idea if it will work. In general, the lack of a usable indicator light is a bit of a PITA, but there are very few USB switchers with 4 devices to pick from (most are only two devices, for some reason) and unfortunately it is still one of the best.