Kingwin Bitcoin Miner Rig Case W/ 6, or 8 GPU Mining Stackable Frame - Expert Crypto Mining Rack W/ Placement for Motherboard for Mining - Air Convection to Improve GPU Cryptocurrency (8 GPU)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Dear Amazon Customerbr> The dimensions of our KC-XXXXXXXXXXXXXXXXXXXXXX L 34 is the case for an 8GPU miner. 6 x W 14. Thank you for two 15-inch high lamps (L 880 x W 360 x H 380 mm). br>br>Customer service at Kingwin
They're not difficult to make. Cut the heads off some long bolts that are the right size for the holes and put a nut in the middle. The nut will not move if you use a drop of super glue on it.
I had no problems mounting an atx motherboard, whether it was an x570 or a z390/490/590.
This frame is extremely well-designed and can be customized to a degree through DIY modifications. There's plenty of room to mount extras if you have the right hardware.
Selected User Reviews For Kingwin Bitcoin Miner Rig Case W/ 6, or 8 GPU Mining Stackable Frame - Expert Crypto Mining Rack W/ Placement for Motherboard for Mining - Air Convection to Improve GPU Cryptocurrency (8 GPU)
This is an excellent design. The unit is simple to put together. The only drawback is that you'll need an adapter bracket if you want to use fans and have some of the larger GPUs. If you have a 3D printer, I can send you the file, or you can contact me and I'll send some to you.
It's what I use for all of my rigs. It's very nice and strong, and it's particularly stackable, which helps me a lot, as you can see in the photo.
Before you buy, there are a few things you should know. I've made the decision to build an RTX 3080 gaming rig. My 120mm x 25mm 70CFM fans interfered with the cards because they were too long. Option A is to purchase 120mm x 15mm fans, which would fit perfectly but provide only 50CFM of airflow. Option B involves mounting the fan frame to the frame's exterior. The three motherboard brackets on my motherboard were not properly aligned. Because the holes on the middle mount did not line up, I was unable to secure any mounts to it. The directions were a complete disaster. The only reason I deducted a star was because of this. The rig's quality and rigidity are excellent.
This appears to have been designed by someone who has never built a computer case, let alone a mining rig. Yes, the instructions are illegible, but you'll be able to figure it out. Worse, it won't fit into a standard M-frame vehicle. ATX, ATX-X, and ATX-X are all acronyms for the same thing. E, the PSU brackets are a sham, and the fan brackets are functional but difficult to remove and service. Rather than waste time and effort, I simply laid down a thick sheet of lexan and stacked the motherboard and power supplies on top of it. shelf made of conductors Of course, moving it requires extreme caution. Save yourself a lot of time and money by purchasing something else, even an Ikea DIY.
This case is nearly identical to others I've built, but instead of being partially preassembled like others (cheaper! ), it comes as a big pile of metal scrap with bad instructions. ) cases. Because other cases were out of stock, I was forced to buy this and pay double for it. Assembling it was a nightmare, and due to the poor instructions, I assembled the bottom backwards, causing the motherboard to not fit correctly. Instead of wasting your money on this overpriced kit, you should build your own rig out of metal bars and mounting hardware. The fan assembly is made of two solid chunks of metal with mounting holes in all the right places, and that is the only positive thing I can say about it. Other cases have fiddly plastic parts that take a long time to assemble, resulting in a flimsy product.
g. , A4 size) may require minor adjustments. 3080ti g. 3080ti g. 3080ti g. 3080 This is a fantastic 8 GPU mining frame that is extremely sturdy. This was my first attempt, and I was pleased with the results. The instructions aren't exactly clear, but you'll figure it out as you go. If I ever have enough GPUs to stack the frames, I will purchase this frame again. The fans wouldn't fit on one of my cards, a Gigabyte 3080ti, so I had to make do. One of the reviewers suggested a corner brace shape, but I don't have access to a 3D printer. I was able to locate a working part, the 3030 Series 3 Way End Corner Bracket Connector, which costs around $16 for four brackets. It works perfectly, and the screw holes are even aligned. br>Here's where you can find it on Amazon: It took about ten minutes to flatten the bottom of one of the GPU support bars with a metal hacksaw. br>Everything is working fine, and the fans and the 3080ti are separated by about an inch. I hope this information is useful to you, fellow hobby miners.
To begin with, the good: Although there are some extra pieces that are not explained in the manual, assembly is not difficult. Once constructed, it is very strong and light. The disadvantages: br>br> The design is flawed because there is no shelf on which to mount your PCI 1x to 16x adapters, and the GPU support bar is too far back to support any of my cards. Furthermore, if you're using a card like the Nvidia p106 that doesn't have any points to screw into the case, you're out of luck. You are unable to mount them in any way. In order to make this usable, I'll need to order some plexiglas and build my own shelf. It would take far too much effort to disassemble it in order to return it.
It's well worth the money because it's made of lightweight aluminum that's also very durable. br>br>I began by purchasing a low-cost brand that claimed to have six GPUs and received positive feedback; It was a complete waste of money; it barely fits two cards and is nothing more than a collection of steel bars screwed together like everyone else's. br>br>Because I'm expecting two more cards, I've restarted my search for a replacement. This time, I focused on the dimensions and compared them to the product images - The title is never to be trusted. Kingwin was discovered in a popular brand's "compare similar products" section, but it was twice as expensive. br>br>The specs look good, and I was able to order it right away because it was a like new one from an Amazon warehouse. br>br>To make a long story short (after the long story above), it took a long time to put together because the frame is made up of multiple, a lot of, CNC machined pieces that are thoughtfully designed, rather than an 8 bar and one flat plate type of thing. Advantages: br>br>
1. The instructions were clear and concise; however, pay close attention to the orientation of the holes on each piece. br>2. Each bar, as well as the screws, is individually bagged and marked to correspond to the instructions. br>3. There are tools included in the package. br>4 The screws are of good quality as well, and extras are included. br>5. Having a fan bracket and protectors is a great featurebr>6. There's enough room for two power supplies and good ventilation between the GPUsbr>7. High-quality and durable framebr>br>Cons, or rather, things to keep in mind when putting it together:
1. There are mostly pictures in the instructions, but some steps require a little more detail. br>2. The edges are a little roughbr>3. Make sure your fans are prepared first by enlarging the screw holes, as it comes with large screwsbr>br>Overall, I would purchase it again.
Related Products For Kingwin Bitcoin Miner Rig Case W/ 6, or 8 GPU Mining Stackable Frame - Expert Crypto Mining Rack W/ Placement for Motherboard for Mining - Air Convection to Improve GPU Cryptocurrency (8 GPU)
