The bracket can be used both vertically and horizontally for shooting, it can be mounted in landscape or portrait mode with ease, rather than using a ball joint which constantly needs to maintain its level, it can also also help during panorama shots to keep the camera on a level ground.
This model is made of aviation aluminum, which has a fantastic surface milling and a super durable use. Made by highly-precise CNC methods, the bracket is extremely light, strong, and durable, which make it worth the money you spend.
The bracket can be installed directly on the tripod head via screws or on a quick release clamp, and you can leave room for a USB cable for charging or connecting to a computer, as well as a couple of stop screws at the bottom to prevent the camera from sliding out during use.
Questions & Answers
Would a tripod be a good option for this item?
I'll gladly take that), The GEEKO 77" super compact that holds 17lbs costs $79+ with a coupon at checkout, but I wouldn't spend that much unless you like it, and I wouldn't go much lower than the $70 range--- you will almost certainly upgrade soon after that. It would be best to find a used Induro on eBay, or a closeout here, if money is not an issue. I loved this item! It is an awesome specialty item [which looks just like the three ARCA Swiss QR plates, having the V groove on the bottom only]. There have been raves over Z plates, if you haven't seen them. Remove the base and replace it with a QR plate with vgroove. Basically, the camera can be very small or very large, but I find a midsized body to be the best, and the tripod head is the most important part. It is not advised to attach directly to the center column, you will need a head, but they come with the This z plate will work well for your tri if you set the legs to standard 90 * out at the legs, and if your column reverses or tilt locks, *** or if you use a head that has great adjustment and extension capability as The following has been noted Although some Z plates are still using Alan screws to keep joints tight, most have switched to thumb screws (since In spite of that, the plate uses small Rosetta gears [they're tiny but they work], so as soon as you've tightened the thumb screws once in the desired position, it won't move anymore. The design is incredible, and it's easy to use As a result, it can be used in many different
Would it be possible to use it for a Canon EOS 250D as well?
Buying the Canon EOS version is the only way to go
What kind of mount does this come with?
A standard screw threads into the camera base, so there is no modification necessary. With this device, I am able to use my Manfrotto mount.
What is the cad file or 2D drawing available that includes ?
In folded state, it measures 4 cm x 7 cm. Five cm is the length of the screws, and one inch is the length of the snugging screws. Approximately five centimeters. There is a height limit of seven feet. Size 5 cm
Selected User Reviews For DSLR Camera L Bracket Vertical Horizontal Switching Tripod Head Quick Release Plate Arca Swiss Compatible with Digital DSLR Camera Stabilizer Tripod Monopod Canon Nikon Sony DJI Osmo Ronin Zhiyun
Compatible with Arca Swiss to a certain extent
There is no better design for a Z-shaped building The bracket is mounted on the wall. Short Arca-type connectors are compatible with it As shown in the photos, Swiss brackets, but not with long bolts (the bolt assembly blocks how far this z-axis will go It is possible to move the bracket onto the Arca-compatible Plat de Suisse). It would not be a major drawback to me, though. They are easy to adjust to the angles you need and can accommodate heavier cameras because they have tension knobs. Moreover, I appreciate that my battery port on my camera is not blocked by this mount, so I can easily replace batteries without having to remove my camera from.
| Jul 26, 2020
There was no instruction manual included so perhaps it would have come in one piece and you'd have to put it together yourself
In order to ensure that I spelled it correctly, I had to look at the photos in the product. It wasn't difficult to put the pieces together. They feel well made and are well designed. The only downside to this L bracket is that it does cover up the battery compartment, but I am sure I will be able to use it well with my Canon M50 as long as I keep the battery compartment cover in place. This is perfect for use with a It is rare that I use the HDMI portion. I was concerned about the flip screen and will now be able to add the l bracket to the opposite side without any issues. This is an awesome purchase! I like how I'm able to get an extra grip on the side and it feels more stable in my hand now. I didn't want anything too bulky so this is perfect for me. A wonderful purchase.
| Nov 26, 2020
It works great! I'm using this device with an old film camera, which I weight quite a bit, and I had no problems with it slipping or wobbling
Additionally I found the locking knobs to be a bit small but it did not interfere with locking the tilt. As far as I know, the only issue I've encountered is a loose screw when it attaches to the base of the camera. There is only one tiny flip out handle, too small to hold and then flip back with your thumb and index finger (as it happened with me). This wasn't a big deal, I used a pair of small pliers, but a small rod that's about 1/8" in diameter was what worked, so I'll put the rod in my If the base is not soft enough, you shouldn't have to spin the camera on it after finger tightening. The base isn't super soft, and it might boggle In any case, it's a great little gadget for the price.
| Jul 29, 2020
I think the price is great for what you get
It was important to me to get It was easy to find a Nikon D780 bracket on eBay, but the ones specific to the camera were extremely expensive. It is a universal length of L one of the benefits of the extra space between the bracket and the camera is that when controlling the camera by hand, it is very convenient. As well as being easy to mount to the camera, the bracket is also durable. the use of hex wrenches for installation. Saved a lot of money and I'm very satisfied.
| Jun 26, 2021
A very good Z tilt for the In the last year or two, I had seen similar Z tilts for cameras
When I saw the one below, I liked how it had clamps around the joints to tighten it rather than using Since all of my cameras have Arca Swiss plates, I have placed an Arca Swiss clamp on top so they can be easily dropped on it if needed. I am able to attach the Z tilt directly to all of my tripods with Arca Swiss clamps since the bottom of the Z tilt is an Arca Swiss plate. Z tilt serves as a very versatile tool for me as a result. The program gives me the ability to set the relative angle of my camera to an object without having to hold Wireless remote shutters make cameras very steady, so they are great for cameras with wireless ability. It is an excellent Z tilt, especially since it comes with claps and features that integrate with Arca Swiss.
| Oct 29, 2020
An extension of a tripod's altitude control that is better than a ball head for handling heavy cameras
To take pictures of the night sky, I use a Nikon coolpix P1000 camera. Sometimes, the altitude adjustment handle bottoms out before my tripod can point the camera at a high enough angle. An insensitive ball head wears out much quicker when a heavy camera or big lens is attached. It is composed of z-components With its added benefit of also helping with low angle shots, the mount is an excellent solution. It also has the advantage of changing only one axis, which is ideal As a bonus, the price is quite reasonable, and the level of service is exceptional. The plate is directly mounted on an ARCA quick-release You need to change the It is recommended.
| Apr 09, 2021
The results are almost as good as they should be
With a lightweight device, the mount works pretty well A camera that looks like that. Although it doesn't have any dampening, it gets the job done quite would have liked to have had was the option to place the knobs on the other side. I like for tuning them to be done using my left hand and it is only a problem in one position. It'll be nice to have an.
| Nov 02, 2020
This is what a landscape looks like
The product is quite nice, especially for the price. Just that I hit the weight limit, so there will be some loss of lock stability. But I Therefore, that is not the reason why a star was lost. This is due to the landscape not being leveled. The distortion is barely noticeable, but when shooting architecture or anything showing horizontal lines, it can be frustrating. Due to this, I must use my larger tripod with a leveling head instead of my mobile tripod without a leveling head to correct. However, I'm still very happy with my purchase. Manual exposures for portraits have been great with this camera.
| Dec 30, 2020