Number of the Guide
In terms of temperature, it is Five millimeters by two hundred thousand
The Flash output is as follows
The power voltage is The voltage is 110 volts and the frequency is 60 Hz
The Flash Power Control consists of This is the eighth step. This lamp is used for modeling purposes This WS (adjustable) measures 75mm x 20mm
Questions & Answers
A recent purchase has been made. It would be helpful to know what kind of wireless triggers I should purchase and what serial number to use. ?
A NEEWER® RT-enabled router is being used by me I just received my 16 channel wireless studio slave flash trigger receiver and it works fine.
This light is part of a package I bought with an Octobox 60. A heavy octobox makes the light fall throughout the house, making it too heavy for the teeth to hold. Does it have a heavy duty part?
There is no way to use this model with The weight is too great. Plastic hardware is not designed to stand up to heavy use. It is only an upgrade. The views expressed here are my own. Despite all that, I still love this brand and product.
Are there any battery packs that work with this?
The answer is yes. No problems for me when I plug it into my alienbees portable battery. The light works well with my B1600 as well. I find that the recycle time isn't instant, unlike the Alienbee Even so, the model lamp is worth the price. As long as you aren't using batteries, I wouldn't keep it on.
Can you tell me what type of wireless transmitter I need? Does it have the brackets needed to mount it to a stand?
Everything arrived in its original state (with a bracket attached to mount to a light stand), I use the cowboy studio transmitter, and it works a charm You should include this with the receiver. As far as I am concerned, it works well
Selected User Reviews For Godox 300w Photography Monolight Flash Strobe Flash Light Smart 300 with Lamp Head for Wedding Portrait Photo Studio
This is a good strobe, but the hinge area below is not well Good for smaller modifiers, but not so good for larger ones
Hinges are held in place by an adjustable knob that can be tightened down to hold them in place. With the 3x2 foot modifier and the 1x4 foot modifier, I am able to adjust the distance by 30 feet. In addition, the knob to tighten down the hinge area was not designed well and I had to use a pair of pliers to tighten it down sufficiently to hold As well, the bottom you set on the top of the light stand is too large and does not come with any adapter to hold it in place. When tightening the screw, the seam in the plastic opposite the tightening screw may crack if you try to tighten it too much, but it seems that you have to do it too to keep the whole thing from collapsing. The light works well as a whole. After nearly a year of usage, the supportive structure leaves much to be desired. There are three of them in my house.
| Apr 17, 2021
The light is great, but the design is flawed
Despite being an affordable product, these strobes provide good value. A portable LED unit is light, portable, portable, has fast recycling times at high power, and has a sufficient amount of power to light a small studio or event. For the modeling light, I am taking away 1 star. The output of this camera is extremely weak, so it is now useless inside a softbox or with an umbrella. Therefore, I won't even bother to use It may be a greater problem than the one that came off Plastic - and not the kind that is strong like Bakelite - is used for the stand mount. In addition to the "teeth" on the tilt lock, these are plastic as well, and will eventually wear There is nothing in this design to indicate it will be able to withstand heavy use over time. I taken one of the stand mounts apart to see if I could replace the lower part with a Cowboy Studio stand mount that I already own (much more sturdy plastic). Unlike the original, this strobe mount has the teeth cut into it for the plates inside, so you'd need to purchase In the event that it becomes The supplier of these parts probably has to be this one. The stand mount is definitely one that needs to be taken care of. It would have been easier for me if it was a simple 1/4"-no hole metal pipe It would have been easy to use either a 20" or 3/8" female thread mount with A full aluminum OM-style tube The 18 Pro Umbrella Holder with Swivel and Tilt for the Hot Shoe is available at the following link The Internet address is www. It is available on Amazon. Where can I find product information for B00HLOLFTS with the reference oh_aui_detailpage_o05_s00? When UTF-8 is specified, it will be displayed in UTF-8 Also, it would seem likely that the choice to use soft plastic to surround the light port is a compromise. Strobe's universal mounting mechanism means it can attach a light modifier, but attaching a light modifier to it could dent or scratch it. In most cases I will use these with umbrellas, therefore I didn't worry about the hole, however I also bought a universal hole wrench in addition to the umbrella hole wrench When I want to use a softbox, beauty dish, or snoot, I use the speed ring adapter. These are available in the following places Click here for more information about the World Wide Web The Internet address is www. It is available on Amazon. Where is GPAUI's product page for B00Q2I6S5U? And what is the reference code? When UTF-8 is specified, it will be displayed in UTF-8 I also tested this strobe with both types of radio triggers I have (Phottix and Yongnuo), and they fired every time. They don't auto dump when you lower the power, but a simple press of the test button will take care of it. To conclude, these issues are not a dealbreaker for me, but they do reveal that you cut corners on these strobes in order to keep the price as low as possible. I'm hoping that these strobes will serve me well for several years as long as they are treated with care and handled correctly. In that case, they will have more than paid for themselves over time. You can't really compare them to Alien Bees or Elinchroms, but they offer a good value for the money due to their high output but below-average design in certain.
| Jun 14, 2021
It works as advertised, is a great price, is light weight and everything works out as it should! The product will be purchased again
A pleasantly surprising feature of this GODOX Studio light is its affordable price. This replaces the old Photogenic Monster 1250 I used in my workhouse. I later found out that it was only 300 watts, which was four times less than my beast. However, my beast is It was my gift when I started a magazine (Model Cars Magazine) to take pictures of car shows across the United States. I thought the Photogenic was a great light, and it still is, and it was, and But it was too heavy, too big, and was more than I needed The refresh cycle is slower, of course, but you can easily get used to it. My old camera allowed me to travel at my own pace with no delay and I could shoot as fast as I wanted. But now I don't have My favorite thing about this outfit is the fit, the appearance, and the set-up. There are a lot of plastic parts on there My setting was a little off on the ring, but that was fine. At this time, I had ordered a new soft box (NEEWER Photo Studio Softbox 50x70cm Universal Mount) and it fitted I also switched to a wireless transmitter/receiver set up, and so far I am very happy with Since a while, Neal, the guy at my local camera store has been trying to get me to buy a wireless camera, but I didn't want to part with my money until now. I'm sorry, Neal, but these low prices here on Amazon (sorry! )I was able to get a simple setup for about In contrast with the other strobe I bought here, the NEWER strobe's modeling light does not work, as did the other strobe I bought from here. I enjoyed everything about this strobe right from the start. As an aside, I liked the heat shut off feature, because I accidentally left the modeling light on, and the unit shut itself off as soon as it became Definitely ordering more of these
I would like to use them for my feature shots in a table top studio, shooting model cars with side fill/reflectors/br>The lighting is perfect, even, and there have been no problems with them whatsoever. Although I did have to replace the cords since the new ones are all smaller than the ones on my old systems, The upgrade is no big deal for me since I am upgrading everything. I love this light, and I love the price. This works great with the inexpensive wireless transmitters and receivers on Amazon
Editor/Publisher of Model Cars Magazine
| Jan 16, 2021
This book is well worth the price
This was a huge investment for my wife, who has been able to up her photography game with them. My mom knows very little about photography, but she loves these lights and has encouraged a couple of her friends to buy them. I can see that they work well in her pictures, as she says. My friend was holding out for some AlienBee's she had used with a friend on a project, so I presented these to her as an alternative (she calls them cheap). She agreed to try them instead, and has been ecstatic with them.
| Apr 23, 2021
You should try this if you haven't already
I am happy with it. A large amount of light is put out. My Canon 80d is around f/8 at ISO 100 with this setting. As I mentioned above, the only thing that I wish they included is a cover for the front element since it is exposed and could be damaged if it isn't I used the strobe and modeling light (the strobe). You should try this if you haven't already. I bought it for a low price, but it's useful. My primary purpose is to use it as a photo booth, a picture of the quality of light is attached.
| Jan 01, 2021