KnuKonceptz 4/8 Gauge in Line Mini - ANL Fuse Holder with 120A Fuse

KnuKonceptz 4/8 Gauge in Line Mini - ANL Fuse Holder with 120A Fuse

$ 9.99

Score By Feature

Based on 233 ratings

Giftable

8.87

Customer service

8.70

Value for money

8.94

Satisfaction

9.04

OveReview Final Score

How Our Score Is Calculated

Product Description

A small fuse holder that fits in the Mini-ANL

It accepts wires up to 8 gauge but not more than 4 gauge

Questions & Answers

Do you know where I can buy just the screws that hold the fuse down in my car because I dropped one somewhere in here haha?

If you're looking for local hardware stores (Ace, Home Depot, Lowe's, etc), I would go to them. As far as hardware goes, it's pretty basic. It will be easier for you to match the fuse block if you bring it with you when you come.

The installation will be a new installation, and I would like some advice about A battery, four AWG fuses, two 8AWG fuses, and a separated splitter would be ideal. Can you tell me the type of fuses you would ?

You need to see how big your amp wire is according to its power so anything above 350 watts should use 4 gauge, but be sure to run 100% copper only. You should run the fuse to your battery depending on which amp you are running, if you have multiple amps running through a distribution block I suggest starting with the highest amp.

How is this unit connected to the water supply?

My answer would be definitely no, it's not waterproof. I assume your question is about whether it's water-resistant.

I'm going to connect this to my wiring under my hood for the amp. Then I could put the wire in and screw it down again, or do I just need to unscrew the ends and screw the wire in?

The screws at the ends need only to be loosened, the wire installed, and the screws retightened. It is easy to remove the top plastic cover by clipping it into place.

Selected User Reviews For KnuKonceptz 4/8 Gauge in Line Mini - ANL Fuse Holder with 120A Fuse

Instead of buying something else, buy In other words, you can forget about the cap fitting on this if you don't mount it on a perfectly flat surface, like down to 100 microns

3/5

And if you don't install it and wire it, you will never see what it is. As shown in the picture, I had to use two zip ties to keep the cap on. Instead of buying something else, buy Fuse holders in line (agu and anl) are readily available and are better than external fuse holders. It serves its purpose as a fuse holder, so it gets 3 stars, but the first time I have to replace a fuse, this thing will be thrown away.

Riggs ALLAN

| Dec 25, 2020

Fuse holder with the best price on a mini ANL

5/5

It is easy to take off the cover for changing the fuse, yet it fits tightly. I had no problems with the metal ends holding the cables, as they were specifically designed for that purpose. I know it's not the best fuse, but hey, who cares! I have tested it, and it works. However, you will probably want to buy and carry an extra fuse anyway, so it is not a big issue. Despite the written description, I am not certain that the product is waterproof. On the cover, you can't see a silicone seal. It's not something I am going to test by submerging mine in water. There's no way I'd say it's waterproof, but it's water resistant and splash resistant. There are some details here that might not seem very important, but for the folks who are looking for super accurate details, we gave you this heads up. Finally, this is an extremely good deal and does exactly what it needs to. A 5 out of 5 star rating is deserved for this fuse holder considering its price and quality.

Luca Murphy

| Jul 01, 2021

I like it for small gauge wire, but I hate it for four gauge wire

3/5

It is hard to tighten the set screws enough to have a secure hold without overtightening and pushing right through the wire. The set screws should be larger or there should be something between them and the wire to spread the.

Keilani Kline

| Oct 17, 2020

This is a good audio program

4/5

Don't use this to fuse your alternator. It's great for audio, but not for fused alternators. A small amp for my door speakers will be used for one, and the other will be used to replace the fried fuse between my power distribution center and alternator will be used for the other. Several of the circuit breakers had 120 amps in them. The fuse blew even before it could melt. It may have been a misapplication on my part, but I will never use it for anything else but.

Alia Lara

| Jan 02, 2021

On the one I received, the little window to see if a fuse is blown was cracked

3/5

There is no way I can see the fuse, and it is still working. Despite its small size, the fuse holder does not pose any security risks. Two metal chunks are not aligned correctly and are not well-made (cheaply made), so it does not look good. The best you can do is to go with the flow.

Alexis Lopez

| Mar 30, 2021

For the inverter setup, a fuse holder is needed

5/5

This feels heavyweight, meaning it is of good You can easily remove the cover. The electrical cable and fuse are secured with hex socket screws. This is the 4 ga I'm using. ". I used it for a small wire and it worked like a charm. It includes reducer sleeves for the next smaller wire size. I am happy.

Cade Swanson

| May 03, 2021

I'm not happy about the quality of the items coming out of your company

3/5

Though I really want to give this product five stars, I'm sadly disappointed in the quality of products coming out of Knukoncepts and other similar companies There was a similar ANL fuse block that I bought a few years ago with compression nut fittings (along with better chrome plating) that was MUCH nicer than this one and used In general, though, I'd give it a 3 because of the cost and I'm right at the middle. I gave it a five-star rating. The device has been in use for about a month and is still performing as needed.

Dilan Thompson

| Dec 07, 2020

It is small and compact

5/5

It is easy to install and a good water repellent
They are well made and make life easier
If you don't have much space under your hood, this is the right product for you.