VIVO TV Floor Stand for 13 to 42 inch Flat Panel LED LCD Plasma Screens, Portable Display Height Adjustable Mount STAND-TV07

As far as the TV is concerned, I had the perfect one. am pleasantly surprised at how well built this stand is for the price. Several people have noted that assembly can be difficult, so I have included a few tips and pictures that should make up for the lack of instructions. It is much easier to identify all the small parts needed for each step of the assembly process if you lay them out as shown in the inventory section of the assembly instructions. Printed on the inventory picture are three different sized bags with nuts and bolts in the exact same order as they are in the package. You should place the hardware bags so that they look just like the inventory picture and then you will know which nuts, bolts, and washers to use. The assembly process requires the use of a tool for each step. In addition, there are many different screws and washers within the second hardware bag, which is for the different configurations of mounting lugs for various So, don't worry, you won't even be using most of them, so you'll find that the task seems more manageable. As I assembled the Center Support (A) to the Feet (B), I noticed that the Center Support (A) did not sit dead center on the feet, but rather was offset, For your information You should therefore not tighten any nuts until you have determined the Center Support (A) is angled at a right angle to the Support Pole (C) so that the Support Pole can be tilted. I modified the model after it was assembled by making a couple of changes. Since the washers included on the TV brackets were too wide or weak, I went to a local hardware store (LO's) and bought beefier washers (in silver in picture) for them since the washers included did not keep the screws from bending when tightened. As well as the 1/4 x 1 size, I paid attention to 2 1/4 x 1 Three and a quarter hitch pins (as shown in the picture) make it easy to adjust the height of the stand or disassemble it for travel. I found the holes for these pins to be perfectly sized! My final opinion of the product is that once it has been assembled, it is in very good condition. The product may last for a.

Hezekiah Maddox

| Apr 22, 2021

These are for my 40" & 42" TVs In public speaking events, 42" LCD displays can be used to monitor confidence and promptness. There is only one issue the tilt locking plug/knob needs to be upgraded to keep the displays at the correct angle even with heavier displays. The latest update for the month of July is as follows * These monitor stands are proving to be very efficient for confidence monitor stands, and they are durable. The four I currently use are listed below. It might be of interest to others that I made a couple of upgrades. **** I replaced the tilt lock knob with these (Metal M6 Dia Female Thread Adjustable Clamp Handle 5Pcs Black) ***** The handles are made of metal and provide a much tighter locking mechanism for the tilt while also allowing the handle angle to be adjusted. I also replaced the column adjustment screws and locknuts (Sportube Wire Case Pin Pack) This pair fits perfectly and since they are black, they appear to blend in. It's much easier to work with than a couple of screws and locknuts. I think of it now as a tool-like device The process of adjusting the height is simpler. Plugs replace the rectangular holes in the bases (RC5030MBBK1 Metric Tubing Plugs for 30x50mm OD Rectangular Tubes -- MoCap (Qty20)) can be ordered online from This is *br.

Gunner PEACOCK

| Aug 26, 2020

My 40" Vizio (which weighs only 17 lbs) slides easily and easily across the patio for optimal viewing at the right height and height position. It is made of durable steel, well finished and simple to assemble. I like the way it looks and how it functions. The assembly was quick and easy. It comes with a sheetmetal wrench and a 4mm Allen, but I used my own 8mm and 10mm sockets to speed up A 17mm end wrench was needed to tighten the caster jam nuts, but a tiny nut was absent A replacement part was found in my collection of miscellaneous nuts and bolts in metric measurement. You should pay close attention to the graphics. After realizing I assembled it upside down, I realized I had made a mistake. The problem can be fixed easily. There is also a collection of TV mounting screws, washers, and spacers included. My original plan was to mount the TV on the wall, but it is off to the side and quite high, so viewing angles would very much be limited and necks would surely be strained. Wherever I might be sitting, I would want the ability to have the TV right in front of me and to also see if it was suitable to optimize for group viewing. I wanted a little cart like this and this one The casters on this cart are high quality urethane, making it easy to roll Wheels of this type aren't cheap hard plastic. A tapped hole in each caster's threaded stem screws into it. We're not going to An end wrench with a 17mm hex shape will be needed to tighten the nuts. Two of the casters are equipped with all-wheel drives There is a lock that prevents both rolling and castering, so the TV stays put if need be. The TV can simply be rolled out of the way or into the house for safe storage when I'm finished watching. 18x20 inches is the size of the base. As my 40" TV is 36 inches wide, you might think that it might be top-heavy, or unstable, but it isn't for me, especially since I have the mast set at With the sturdy steel telescoping mast, I am able to lower the TV so that the bottom edge is 24" inches from the ground - that way my 40" TV is 24" inches from the ground The height of coffee tables is a few inches above ground level. In my somewhat low patio chairs, I can sit at an extremely comfortable angle when watching the world beyond. The TV is situated at an extremely comfortable height, so you won't feel any strain in your neck. The mount has an adjustable hole pattern that fits the Visa mount hole pattern on my TV, which measures 200x200mm. The mounting bars on other stands are quite large. There are no special features, just a small, simple and compact design. It has a max Visa mounting pattern of A tilt adjustment of about 15 degrees can be made. You can level and tilt it. In other words, it doesn't tilt down at all. By turning a knob, the tilt can be adjusted. Observe that the TV is more or less permanently mounted to the mast, and that the mast is bolted tightly to the base using five fasteners with locknuts that means it cannot be taken apart with ease. For traveling, you will need thumbscrews if you want to disassemble the device. Keeping it simple and clean is key to success. Despite its reasonable price, it is a great product. There is no wobble anywhere since all of the nuts and bolts have been tightened tightly. There was no way he could have been Despite its robust construction, it is lightweight, portable, and strong.

Eliza Bowman

| Oct 01, 2020