Heavy Duty Microphone Arm Stand, Adjustable Suspension Boom Scissor Mic Stand with Dual Layered Mic Pop Filter, 3/8" to 5/8" Screw Adapter Clip for Blue Yeti Snowball, Yeti Nano, Yeti x and other Mic

Overall, the boom arm is a great piece of equipment. I like the feeling of security when I connect my desk to the Internet. In terms of its intended use, it does precisely what it's supposed to. said, there are two things I dislike about the video 1*
Support your state/province. As soon as it comes out of the box, the boom arm is too stiff to move the microphone far out horizontally. It was only to be able to pull the microphone in front of my mouth that I purchased the boom arm. As I was standing on the side of my desk, I had to detach one of the springs on the lower half of the boom so that it would travel far enough to reach me from there. Also, it does not appear that the spring can be easily removed, so it just hangs there. As you can see in the attached photo. Although a minor inconvenience, it is important to note. 2.

It is really stiff when it comes to the pop filter arm. It's often difficult to keep it centered after placed over the mic. After time, it bends away until it is no longer centered. It is rather annoying, but it is not a deal breaker. I think the mic boom arm is a really good product. I'm able to use my Blue Yeti USB without any problems.

Greta Bentley

| Oct 11, 2020

The mounting system is not strong enough to hold 4 pounds. Despite having 4 lbs listed in its listing on Amazon, there is no way this mount hinge will hold that weight. One pound is the weight of the U87 Mic I'm using. One pound weighs 1 ounce and 11 ounces weighs the shock mount I'm using. You will not be able to position the microphone up or down with this. It is the hinge at the end of the swing arm that is really terrible, and on one side, it has a cheap and poorly produced pop rivet, which could have been substituted with a high-quality rivet. In my opinion, the mic mount can support no more than a pound of weight There is something fundamentally wrong with this In the mic mount is going to be the point of highest stress. It's a waste of time and effort to waste your time on this garbage or MAKE SURE YOU ARE A WISE BUYER!.

Laila FitzPatrick

| Aug 03, 2021

A floor stand was not an option because our office is too small for an open floor plan. Instead, I chose an arm stand that is strong, compact, and extremely versatile. I found this arm stand to be exactly what I needed. I can hold my Yeti microphone easily in this case. It stays in place regardless of the position in which I move the mic. I can easily attach it to different parts of my office furniture due to its size and the added safety of the mounting bracket. As far as the pop filter goes, I haven't used it yet. However, the foam mic cover is installed. Besides fitting well and staying put, it is comfortable and practical. This arm stand is really tough and makes recording my saxophone a breeze. I am very happy with the design. Velcro straps are also included to hold the wires in place, which is a nice feature. The design is very good.

Saoirse Rasmussen

| Apr 12, 2021

It is highly likely that many people will be somewhat skeptical about this before they purchase, considering that there are many more expensive options available. It is a metal arm that is sturdy and durable. So far, there has been no issue with loose tension and the item has worked fine. I can see that your microphone has a metal piece that holds it in place - that's the only piece that is not metal. In reality, though, it really doesn't matter that much. Since I got the tool, I have been able to clear my desk of cables and greatly improved my content to the point where it no longer sounds like An additional bonus is that the producer throws in a microphone windscreen and pop filter as well. I highly recommend this product!.

Alma Stokes

| Sep 09, 2020

Rather than being a solid anchor base, the cone shaped anchor base is hollow plastic with a thin rubber sticker on top that, upon sufficient pressure, will be cut by the plastic and begin peeling off, causing the base to loosen and fall In my case, the microphone was mounted on a corner, and when it was swung to the side of the desk, the mount swung off the corner and fell off, slamming my Shure Microphone to It felt flimsy from the beginning, and even the locks didn't hold it in place. I forgot to mention that the Velcro is not really usable. Designing the cut for the cut out was wrong since no one actually tried to use it with the cut. I'm just making fun of you. This is Alibaba (Alibaba's worst) at its finest.

Madilynn Choi

| Feb 08, 2021

spent nearly a month searching for an affordable Mic Boom and to tell you the truth, it exceeded my expectations and made me happy. The construction is all metal and moves gracefully so it can be maneuvered out of my way when I wish to change directions. It was very well made and I have a large and heavy microphone that it handled without any issues. The package comes with a lot of accessories and although I didn't need everything, it is convenient to not have to buy them all separately. In fact, the only thing that wasn't included was the mic itself, but I already had one. So, everything from the spit guard to the adapter screw to the cable keepers, mic clip, etc. was in the case. There is no doubt this was a wonderful value and I would give it a 10 out of 10. This one is a good one and I'll buy it again if I need another one.

Javier Willis

| Sep 01, 2021

It is of good quality and carefully designed. Starting with a well crafted desk clamp, a rectangular frame that's lightweight and strong with swiveling capabilities, and a swiveling desk clamp, we have a great desk clamp for you. In my opinion, the adapter is the perfect match for my Blue Snowball Microphone, allowing me to position the microphone at an ideal angle for a consistently high quality presentation. As far as I know, this is my second. The first one had a defective clamp feature, so I had to return it. In a week, the company had exchanged it for me and I received the new one that I am very pleased My personal preference is to use this arm for the "Yeti Snowball". * Microphone.

Maya Stanton

| Nov 18, 2020

This is a great value when you consider all it offers. Despite its lightweight design, this arm is quite that provide stability to maintain the positions of the joints on the mount arm work perfectly fine. In terms of motion of the mount, the springs are perfect in that they are not so tight that they cause the mount to be pulled to a certain height or a particular position. As well as a wide range of motion, the device has excellent stability. Moving the mount arm in a particular location or moving it out of the way is not a problem for me. I can also say there are no squeaks from the joints once I move it (I've only had it It is very well designed and easy to use! I am very impressed with the quality as well as how simple it is to use! In addition, since this is my first mic mount arm, I do not know how it compares with others but if you're in my situation or looking for a good deal, I highly recommend it!.

Lyla Yu

| Sep 16, 2020