The Samsung Galaxy S9+ PLUS G965 is compatible with all carriers and models (W), but not the Galaxy S9.
It includes a removal tool, the camera lens, as well as a pre-installed camera frame and adhesive to enable fast
A new kit to replace the back glass of the galaxy S9+ when it's broken, parts for the broken Galaxy S9+ rear glass
All products from CELL4LESS are guaranteed to be of high quality and fit perfectly. By directly contacting us on Amazon, we can provide you with support
Selected User Reviews For CELL4LESS Compatible Back Glass Cover Back Door w/Pre-Installed Camera Lens - Adhesive-Removal Tool- Camera Lens for Samsung Galaxy S9+ Plus - All Models G965 All Carriers- OEM Replacement (Black)
This is super close, but the colors are a bit darker under There isn't a huge difference between them
| Dec 10, 2020
There is only one size that fits the s9+
For the s9+, search for
Vimour Back Cover Glass Replacement for Samsung Galaxy S9 G960U All Carriers with Pre-installed The lens of your camera together with the adhesives and professional tools required for repair are installed (Midnight Black)
Best back glass cover back door with pre-installed adhesives I don't know about the quality of these two but should work for the Samsung Galaxy S9 G960 All Models (Purple)
I'm not sure about the quality of these two, but they should work.
| Aug 11, 2020
For the Galaxy S9+, this was the perfect accessory. Originally, I purchased a slightly cheaper back glass, and it was fine for most purposes, but it cost me There is a 5mm oversize. Even though that may not seem like much, it was noticeable when trying to hold I just discovered that it cost about 30% more than the other item, but the fit was perfect.
I just noticed it now, and it has a micro-cutout on the right side. As a result of fractures, damage has occurred. There is something like a nano-line, so small it seems smooth when you run your fingers over it. It's not really a crack at all it's more like a nano-line. My rough handling of it might have contributed to the problem. I almost can't see my fingerprint residue because of how small the fracture is My lack of wiping it down might have meant I would not notice it. However, I'd much rather have this unit instead of the other one I had, which though it was slightly cheaper was only a "pretty-good" one That's too bad- The fit is close. There is no doubt that this item will fit perfectly. It was easy to install and I had no problems with it. My tools included a spudging tool for separating the existing back glass from the chassis, a bottle of 90% plus isopropyl alcohol in a mister, and lint-free cloths to wipe the back glass after removal You will receive a cloth for free. A free cloth for removing previous adhesive and to clean or prepare the area where the new back glass adhesive will be applied, is worth your time.
The following are the working steps You can use a spudger to remove the It is likely that the back glass will be damaged during this process Unfortunately, it has already been damaged, so you'll have to replace it. Spray 90+% isopropyl alcohol on lint and use a brush to remove Clean up all adhesive residue that has been left behind by the original back glass with a lint-free cloth. Placing the new back glass on the phone frame slowly and patiently is the key to success. Make sure you get this right the first time. Adding a millimeter of adhesive will break up the layers, causing uneven layers of adhesive that will threaten waterproofing. If you miss by just a fraction of a millimeter, you'll have had to retry and the adhesive won't come off cleanly.
| Jun 27, 2021
This replacement glass backing is perfect for Samsung's Galaxy This is a great replacement glass backing for the Galaxy S9+
You will need to swap out the fingerprint scanner, and I had to use the old scanner adhesive (heated it and removed it with tweezers) since the new one wouldn't stick to it for whatever Here's a little tip Cover the back of the phone in tape before you take out the old one or you'll end up with tiny glass chips There was almost a dead on match in terms of color. Compared to the previous model, the new one seemed to be a little.
| Apr 16, 2021
The pressure was so light that it broke
It cracked right away after I applied light pressure rather than waiting for it to dry naturally. I'm going to put in my two This cover is not worth buying. There won't be much time left for it.
| Dec 11, 2020
Similar in almost every way! If you don't, it is impossible to tell
Please be warned that if you're getting rid of a cracked back that has been pretty severely damaged, the original backing may scratch the metal of the phone's frame. Added an edit Despite trying to replace it, the new one cracked on me due to its size. It may be defective, so I'm getting a replacement and waiting to see what happens when it's installed.
| Sep 30, 2020
Fits great and is easy to install
Let's begin by saying that the packaging is beautiful. It comes in a pretty thick and sturdy pressboard carton that's used as a shipping box. In addition to the excellent packaging, there is a nice flexible metal prying tool that goes along with the glass replacement. Besides being extremely comfortable, the back is also pre-curved My experience with the installation adhesive has been excellent (I had to install my own adhesive when replacing the screen downside to this product is that the writing on the back is darker than OEM, so it does not show up as well as the OEM version. Because I keep my phone in a case almost all the time, I don't care about this. Furthermore, I found that the adhesive on the outside of the plastic edge came up a little bit along the way as I pulled. This didn't take away a star from the product because I was able to get it to work. However, it did make preparation a little more challenging. Overall, the product is excellent and I will be using Cell4Less for any other parts I might need in the future.
| Mar 13, 2021
I really liked how smoothly everything went together
The glass fitted perfectly and I thought the assembly was excellent. Some say the glass broke quickly. I believe that is a result of wearing a thin layer of tape on the back before sticking it This will prevent the mounting from being smooth and will likely lead to cracks on the edges. Be sure the internal pieces are fully seated before pressing the new glass down. As with other internal repairs, make sure the external pieces are properly aligned before proceeding. A clean finish is also included.
| Oct 27, 2020