It is necessary for the hub bore to be 64 millimeters. A 12x1 stud must have a stud thread that is 1mm in diameter. A set of five 5 lug wheels
Packaged in padding box, 2 years warranty included! Comes as pictured and packaged in padding box! Feel free to contact us and we'll get back to you as soon as possible
Specifically designed for 6061-T6 air aluminum, with a tensile strength of
Questions & Answers
What type of fit will this fit on a Honda Civic sport 2019? Can you tell me if it's plug and ?
A set of these honda civic wheel spacers fits models from 2006 to Easily install the 2020 Civic and we will update the date as soon as possible
Item 60 of the Will. Will these wheels fit on a spacer with a 1mm center bore?
There are 64 of them. It has a bore of 1mm.
Would it be possible to replace them with 15mm ones if you have any on hand? I just bought them. Can you help me?
There are many reasons why you would desire to lose weight. Their only thing that I know of is 20mm &amp up
Do you think it'll fit on the 2016 Chevrolet Cruze? Shave my studs, and do I have to shave mine?
The belt fits a Honda CRV 2016 without a problem. There is a possibility of having to shave you stud if the length of the stud is longer than the thickness of the wheel spacer.
Selected User Reviews For dynofit 5x4.5 20mm M12x1.5 64.1 Hubcentric Wheel Spacers for CR-V HR-V Element Crosstour Accord, 4pcs 5x114.3 Solid Wheels Spacer for RDX TLX CDX CSX ILX RSX TSX 5 Lug Rims and More
I placed it on my 2007 Civic and it fit perfectly
This is incredible! In this case, the spacers fit around the hub ring "like a groove" Ace venture pet detective torque your hubs down using a click type torque wrench in order to make sure you're doing it correctly. It is not necessary to cut or grind OEM lug studs to fit your vehicle. It is my factory wheels I am using. You've got a nice clean design, and I'm sure it handles a little.
| Mar 09, 2021
This is the perfect fit Once you notice the offset on the factory wheels isn't aggressive enough for a flush fitment on the lowered RSXs, everything looks great
I investigated quite a bit and most people recommended spacers for the rear to be 5mm wider than the fronts, but after putting on these 20mm spacers all around, I'm not sure I'd want/need another 5mm for In the end, the installation process was easy, the cost was low, and the result was excellent. The fenders in the front of an RSX do not need to be rolled, while the fenders behind the wheel need to be Having them on for a few weeks now, I haven't experienced any vibrations or wobbling, nor have I had problems with the lug nuts loosening.
| Mar 24, 2021
It is of good quality! Civic hatch sport after having it lowered with Eibach Sportline springs
Purchased these (20mm all around) for 2018 civic hatch sport. You can't go wrong with this fitment! The skin does not rub at all. The studs on spacers were initially a concern based on some reviews, but they appear to have been updated by Dynofit, which leads me to believe they are now much much stronger and much better produced. Since the springs have been lowered, the stock wheels are flush with the fenders, and the car looks more aggressive. Even though the studs were slightly longer (by 1/4") than stock ones, it didn't have any effect on the lug nuts. Those who said it broke because of its length may have only broken it because it was over torqued, as I saw some say they broke it because it was too long. There is a torque of 80lbs. This is equal to 960 lbs if you're using inch LBS torque wrench. I am happy with how everything turned out. I am happy that these updated ones seem to have fixed those issues.
| Mar 27, 2021
The fit and the look are great! The act of writing reviews is not something I normally do There is an exception to the rule here
I just wanted to thank you for your great service and attention to detail Deliveries are made as soon as possible. Within 2 days (with Amazon Prime, of course) I received these. The second aspect is that the spacers are of high quality and they stick to the hub Their fit is centric, which means they are centered on each other I like how snug the Civic Si is. With the factory wheels installed, the fender now sits flush with the rim, there are no rubbing or scraping and the look is now sportier and more aggressive. I would definitely buy from them.
| Feb 08, 2021
A 2014 MDX tech can be used with this item
Greetings, I have a 2014 MDX AWD with SH trim level that includes the 19" wheels as part of the Tech pack. steering the wheels right or left, there is still room for the stock tires when steering them to extreme right and left. Although I would assume it would be even better if you tried 25mm in the back! 1) You'll need to explore what would happen if you had different offsets front and rear, even though BMWs have this set up
2) although the 20mm works great up front, I'd use the 25mm in the rear, not all the way around.
| Sep 21, 2020
The wheels came off and the lug nuts seized
The spacer studs plugged up the OEM lug nuts, so I had to remove the spacers and replace the lug nuts. All 3 spacer lugs broke. is too thin to be of this type and causes your OEM studs to dig into the backside of the wheels, potentially ruining your wheel studs as well as making holes in the backside This was the solution I used to fix mine.
| Aug 08, 2020
The Spacers are good quality but the studs on them are too long They would not fit fine on my 2017 Civic Hatchback but they bolted up great to the hub and the hubcentric ring would not center my OEM Sport wheels, once I tightened the original Honda wheel locks, the center piece of the wheel lock nut broke
seems the studs on the spacers are too long for the original MCguard wheelslides so all four locks broke in the middle. I am now in the market for new wheelslides.
| Jan 28, 2021
It has been a great quality so far
The wheel spacers have been installed on my Honda Accord Touring 2018. The studs and nuts appear to be in good condition and the nut looks to be a good fit. They look like they are of great quality. I found these to be a perfect fit for my Accord hub and they push them out about 3/4". The wheel alignments made a huge impact on the stance of the vehicle and the installation was incredibly simple. Its ride quality is very good, and its noise level is also very low. I use the same setup as I did before.
| Oct 17, 2020