kauplus Cold Glue Dent Removeal Kit
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Dear A., how are you? Mohammed Shameer - In short, yes. A 50g bottle of cold glue was included in the set. Thank you for your inquiry.
Taiwan is the place where this product was made.
Selected User Reviews For kauplus Cold Glue Dent Removeal Kit
There are two dents on the fender where it was bumped by equipment so I bought a new pickup bed from the salvage yard. The old one rusted out, so I bought a new one. It was almost impossible to completely remove a small, long dent that had only damaged the clear coat and not broken the paint. My car has a dent the size of a nickel at a corner by the tail light, and I cannot access The only thing I will do is polish and wax this one. A more significant dent was between the bar metal and the metal with a number of complex As I pulled it out, I worked my way through and around it. After a while, the paint and clear coat started peeling off and sticking to the monkey snot, so I ended up stopping. In any case, that will need to be repainted, so I used a hammer, dollies, etc. to complete the job. My rating is based on a comparison with something I have never used before therefore, I have no base to compare to- Therefore, you should take this into account. It's still possible that the threads in the aluminum aren't giving out, but the hammer has already affected them (tight to unscrew when I first started). It is likely that that is a big clue as.
It is better to use Cold Glue rather than a When I used the tool for the first time, I pinched one hand to take the slide back, and I also pinched the other hand to hold If you are going to use these tools, wear really thick gloves! There is a risk of losing part of your hand with There will be some metal movement when the metal temperature is below 85 degrees and the air temperature is beneath 80 degrees. I have bad news to share with you. Aluminum is used for the red holding part of the tool, while steel is used for everything else. In fact, you have to tear the slide bar out of the red holder because the car adheres so well to the cold glue. A value can be found for the price paid. It feels good when you get it for the first time. Then, take the holder to a machine shop and have them put a high strength pin up to the.
It took me a while to figure out how to use this to repair a series of dents on the rear door of my hatchback, but the results were impressive nonetheless. My experience with all the suction cups and hot glue systems is that this is much more convenient for home users than any of them. I wish to warn you of two things. A body shop will never be able to provide you with the same results as you can get from a dent. You’ll get perfection if you hire someone who knows about this tool (who may well be using it himself). Two, most dents don't just jump out of a car like a miracle on the first try. Patiently and methodically are the keys to success. For a dent to completely disappear, it may take a dozen or two dozen pulls. You will get the best results if you take your time, do not start with the deepest part of the dent, and use this tool gently. There's little mess with this method compared to hot glue systems, and you set up right away for your next pull after finishing. This application is well designed and very intuitive. I did not damage my paint in any way.
It's a steal at $65 if you are a PDR tech like myself, saving yourself a couple bucks and trying this kit you won't regret it. If you want to thank me later, go ahead.
There's no better deal out there than this Kauplus kit. Despite the poor build quality of the slide hammer and the weak cold glue tabs, the tool appears strong in usage. There are 1 hammers on the table. 2 kg) of fruit and vegetables. The weight of the dog is 87 pounds. One concern I have is that the tabs that come with the kit are a bit too large. In order to fix this problem, however, an adapter that is available on Amazon may be used. As far as fit, the adapter was perfect (same threading) and I was able to use my existing smaller glue tabs.
Read before buying. It was a mistake for me to order the tool, but I missed the fact that it could not be returned if it does not work. Be sure to read the entire product description before you purchase. I need to have all the three dents on my truck fixed by you. Hopefully it will do a better job than mine but not perfect. Just make sure you read the no returns before buying, maybe someone else will find it useful or you can donate it to the local school body shop class if it doesn't work for you.
You can download it for free! The product works as advertised. There are no shipping costs. I am very happy with my purchase.
Cold glue kit with actual results that is far cheaper than the competition. PDR techs aren't my field, so I won't even considering spending $300-400 in those circumstances You can buy a cold glue kit for $400. The reviews were great, but the item sold out so fast that I'm glad I took a chance. On my Honda fender, I managed to pull out a dent that was big enough to take out the headlight. Obviously, it's not perfect, but it's so much better than what we used to have. In order to use the pry bar, I need a decent set of pliers You'll need bars, a hammer and a light to knock down those high spots.