ICON 12380 Holding Tank with Center Side Drain HT241BSD - 55.5" x 30" x 7", 33 Gallon

$ 377.53

Score By Feature

Based on 6 ratings

Value for money

9.61

Delivery

9.54

Packaging

9.61

Giftable

9.58

OveReview Final Score

How Our Score Is Calculated

Product Description

The suit can be worn by anyone

There are 56 packages in this package. A 5 inch wide

There are eight inches of height on the package. A 5 inch wide

Approximately 30 inches are measured along the package's width. A 5 inch wide

Questions & Answers

What is the pre-installation status of the vent hole or sink drain Do you drill on top of the surface?

A hole does not exist in the top of the HT241BSD tank for inlet. The reason for this is to allow RV customers to drill into the tanks the type of holes that are appropriate for the RV's plumbing configuration.

Selected User Reviews For ICON 12380 Holding Tank with Center Side Drain HT241BSD - 55.5" x 30" x 7", 33 Gallon

Thanks so much

5/5

I think this holding tank is great. It is very well made and well designed.

Catalina Koch

| May 30, 2021

It is of good A new 98 Jayco 3310 (shower tank) was installed

5/5

A close look at the bottom of the tank will give you the impression it is beveled, not square as the picture depicts. It is important for the seller to state the height at which the center of outlet is located. The outlet is very long and has been set up to accommodate a three inch coupler. We had to relocate the entire tank, so we took advantage of this situation to put a rubber boot between the mounting flange of the valve to facilitate an easy non-rigid To install inlets in the tank, we used the flanged ABS fittings. The flanged fittings were adhered with medium black abs cement, and I made a paste from the pieces I removed with the hole saw by soaking them in paint thinner. I then applied it to the outside of the flange to double seal the fittings. Install rubber couplers on the drain tubes coming into the tank to keep the drain pipes from breaking and make the tank stand alone. All in all, this is a good quality tank, but it needs better pictures and more specifications. It follows that There was a 1/2" difference in both the width and the length of the edges of the tank.