Norcold Inc. Refrigerators 619154 Thermocouple
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The model 300 LP refrigerator from Norcold is fairly certain to work with it. My experience was very positive and I hope it will be the same for you.
This is the coiled size, which is essentially four 1/2 inch round and two inches long The height is 5/8". Unless it is packed into an envelope, it doesn't seem as tall as it looks. Would you mind letting me know the dimensions you are In what amount of time?
There are 60 inches of length, and there are 2 inches at the end. One time I got an end which was over 2 inches long and this caused the end to extend beyond the burner, which is not good. The idea did not come to fruition.
As I already installed it, I don't have an exact measuring device, but it matched perfectly. My refrigerator is a standard one that fits underneath my countertop in my Jayco. The Norcold Inc. I also bought was also from My 621737 Thermocouple Interrupter from a refrigerator couldn't stand the wear and tear too much longer, so I thought I might replace that as well.
Selected User Reviews For Norcold Inc. Refrigerators 619154 Thermocouple
I examined the thermocouple through the back of the unit and observed that it had not been threaded properly Despite the switch's threaded inlet being deep enough to be fully engaged by the thermocouple fitting's threads, the fitting did not fully attach to the switch. Having purchased a new thermocouple, I attempted to install it and still got the same error message An interrupter could not be threaded properly into the fitting. The thread of the thermocouple fitting barely touched the threads in the interrupter when I tried to catch it. An interrupter inlet connects the fitting after it is inserted as far as it can go. My fridge was out again in a day after I hooked it up the best I could. It goes without saying that the new thermocouple won't solve the problem. The trailer began acting up shortly after I bought it. I suspect someone had installed or repaired it with a wrong interrupter (I bought it It's all right. The topic requires further study. My god. Ohhhh. In many Norcold refrigerators, the selector wires were made in a way that the wire connections had a resistance factor too high to effectively carry through the valve control system those few milliamperes generated by the thermocouple. Norcold recalled the product and created a wiring harness that consists of just two wires (red and blue) and their connectors to fix this problem. The material is assumed to be of high quality this time. For details, please refer to the Norcold Service Bulletin N300 LP Mode Troubleshooting TNCSTP 081804 Here We bought the wires from Norcold Inc. on Amazon. (Norcold's 628119 Switch Wire Installation Kit) with their connectors and a new switch (Norcold's 628119 Switch Wire Installation Kit). This time I purchased Thermocouple Interrupters (621737) and it all fit together perfectly, the thermocouple threaded right into the new interrupter, and the fridge now works fine. By the way, I bought the unit recently - but purchased it previously! For example, you may not need to remove the entire fridge from the cabinet or remove all of the wires from the refrigerator as the troubleshooting guide says to do. It was possible to get my arms past the cooling fins on the back side of the trailer and work it from the outside. Having long sleeves made it easier for me to reach the cooling fins, since I had my arms raised. There are scratches on the corners. If you want to replace the interrupter, be careful not to damage the flame meter connector when you use your pliers to remove it. This wire has a tiny gauge, and you don't want to pull on the connector too hard so you can end up yanking the wire away from the meter when it releases. As for mine, I believe I came close to finding the culprit. *But I am not sure whether it was the thermocouple or it was the interrupter or the wires and connectors. But replacing all three components has, so far, resolved the issue. The first three days after installation, we used it on a three day trip and it worked fine.
This was happening to my pilot light, which was becoming less and less lit. After a while, it just stopped working completely. The thermocouple and the interrupter I bought work perfectly in the refrigerator. This took about as long as It took me 45 minutes from beginning to end. For the two items to be replaced, only a few inches of the fridge must be removed. The fridge is already in the cabinet, so nothing needs to be undone except the screws on the front face of the fridge.
A new voltage was applied to the fridge.
In addition to replacing this thermocouple, you might as well replace the A Thermocouple Interrupter 621737 is used in refrigerators.
During a recent trip to the horse trailer, I replaced the thermocouple in the refrigerator. The new one worked and solved the problem of the running not being able to continue.
It is easy to turn the vu switch on. The fix is simple. Its hot end had completely deteriorated when it was original. A separate note is that the points in a three-way switch have worn.
I was happy with the outcome.
Upon inspection, it appears to be a correct part for my refrigerator, however, I only got it as an emergency backup, not to replace it immediately. It is my hope that it will work when I.
Related Products For Norcold Inc. Refrigerators 619154 Thermocouple
