Quick Products JQ-3000 Power A-Frame Electric Tongue Jack - 3,250 lbs. Lift Capacity
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In addition to the black wire, there is also a white wire for a Through the bolted connection of the jack base to the tongue of the trailer, the ground is obtained. Check to see that there is a quality metal - When the jack is bolted in place, there is a metal connection.
Despite retracting pretty compactly, it maintains good maneuverability. I like how compact this jack is in comparison to the one in
For the light on the jack, this is what you need to do.
It measures 7" from the bottom of the mounting plate to the bottom of the outer tube
Selected User Reviews For Quick Products JQ-3000 Power A-Frame Electric Tongue Jack - 3,250 lbs. Lift Capacity
I have had no issues and it has proven to be a very reliable system. If it fails within the next few days, I will update my review. In the articles I read prior to purchasing this jack, I read a lot of complaints about the speed of this jack. I disagree with that assessment. It is denoted by a I have noticed that my trailer is raised by the 3000 at a relatively rapid rate. Having this jack mounted to a 6,000LB travel trailer, it works perfectly with it and, when using the weight distribution bars to connect to the trailer, the jack is powerful enough to pick up the trailer and relieve the strain on the truck springs so hooking up is.
With the adjustable foot, the jack can be easily adjusted. It was just delivered yesterday and I was able to install it in about half an This new crank was installed on my 24 1/2' 2016 Keystone Passport TT. I previously had a manual crank. I bolted it right up with no trouble. My batteries are mounted in the A frame behind the propane tanks, so I connected them directly to the house battery. There is a fuse holder that has a 10 ga wire, along with a ring terminal, so just cut the loop and add a terminal to the of the wire goes to the wire coming from the jack, I used an all weather butt connector to connect the wires, and I sealed the connection with heat shrink tubing and adhesive. Please note that There are no wire terminals or bolts included in the kit for mounting the jack, only star washers for grounding the jack yourself, as it is self grounding. The bolt pattern is a triangle shape, the jack will only fit one way, the motor is facing forward. It was just a matter of replacing the existing bolts, since they were in good shape. A foot is included with the jack to allow for adjustment, extending the jack by about 6 inches. A few small lights are on the sides of the jack, but the lights are not A motor cover and manual crank are included in case of emergency, as well as a cover for the motor. An additional white bubble level can be seen mounted to the top of the motor. I like that it works well, isn't too loud, and lifts the While it's not as fast as some other apps, it gets the job done well. real test of it will be how long it lasts, but so far it has been excellent. I'd rather crank than hand crank any day of the week. It's a good value for the money, especially when considering the price.
The cost is almost the same as that of In my first order, a shipping damage resulted in a broken light switch. Amazon rushed the second one to me the following day (excellent as usual). A fused section of wire, a manual crank, and some washers are included. It doesn't come with bolts, but if you already have a bolted manual crank jack on your camper, you shouldn't need any replacement ones. My wish would have been to have ordered it sooner than I did. Even with the way I did it, it only took 30 minutes and was done in my own sweet time. One could do the installation in 5 minutes or less by skipping the fuse and zip tying the wire every 5 inches. It should be installed once the trailer is hooked up so you don't have to drag a car jack over to lift the tongue of the old jack while your trailer is detached. Considering the price (I paid around 65) these lights are adequate. As a matter of fact, it looks quite similar to the Harbor Freight electric jack that costs It is adjustable using a pin so that you can raise and lower the minimum height. I managed to get the bottom of my A-s on the second peg from the bottom of the foot 19 inches above the ground is the frame. It is likely that you could lift the foot up to 25 inches if you used another hole on the foot. For me, I had no problem using this to lift the back of my F-150 It is easy to connect the weight distribution bars at 150 pounds. It is one of the best products out there. If it fails, it WILL be updated.
In the heat of the summer, after owning 6 Camp trailers and having to crank them up and down every time it rained, I decided to go for it. used heat-shrink tubing over the butt connector splice to prevent moisture from getting into the system. It took me less than 30 minutes to install. The directions don't even need to be opened, since it's a simple process. You may need to tape a spare fuse to the fuse holder, because if you exceed the lifting capacity of the jack, the fuse will blow. My plan is to replace it at some point with a resettable circuit breaker. In my old crank jack, I had the taller foot extension than the short one that comes with this unit, so I was thrilled to find that it could be swapped right in. The jack has to power down less distance now, and I use mine in the tallest and deepest hole in the house. Pull the pin as soon as it is off the ground, slide the foot up into the jack and reinsert the Unloading entails the opposite, and the motor will need to move less when it is unloaded. I found the price to be very reasonable for such a sturdy unit. It should be able to hold my interest for at least two seasons. You will need to keep the cover on to prevent moisture from getting inside as that can kill the plants in a short period of time.
It was dead at the time of Connected the unit to the power source I don't know. I thought I screwed up the wiring (there's one wire that you connect to the positive terminal, and you ground it by making sure you have good metal-to-metal contact between the two wires. The metal makes contact with the frame when it's bolted to it). In light of that, I rephrase You should have read the directions and made sure this was connected properly. Yes, I agree. There is still no response. Despite the wire of the housing having a secure connection, the wires had been exposed as the connection between the wire and the Although this might have been the fault of the manufacturer, I believe it was more the result of a previous return. In my opinion, it didn't appear to be used, just that there was some design flaw This is because they are easily discovered. In short, this is a cheaply made product on all counts. The lighter one will be sent back and a heavy-duty one will be ordered You have the option of doing duty. Having to spend days camping, trying to pull my hair out, is not something I desire.