Valterra BLACK Gravity Fresh Water Fill Hatch Inlet RV Trailer
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Screws are not included in this kit.
A little over one eighth in
It will work as long as you use a good sealant around the outside
There should already be a hose running from the vent hole (or the fill tank itself) to the tank. A hose is not included in this item There are only a few screws needed to mount the port.
Selected User Reviews For Valterra BLACK Gravity Fresh Water Fill Hatch Inlet RV Trailer
it mounted on the wall of a cabinet inside a van equipped with a 26-inch screen Water tank with a capacity of 5 gallons. Although it works well enough, if you fill the tank to the top and there is a surge/splashback from driving, the cap is not watertight, so there will be a lot of water coming It would be nice if the cap was tighter and had There is no way to fix it without glue even if you try to tighten it too tight (inner fitting rotates), so you can't do it much tighter.
This hole saw fits the 5" hole. From the moment you pick this up, it is clear to see that is a high quality product. Installation was simple in It's rare to find a 3 in stores. You'll need a 5" hole saw to buy this so I recommend picking one up on Amazon as you do.
It is a simple matter to replace the item. To close it, I taped behind it with butyl tape and then laid a silicone bead around the outside. A lot more contrast is created by the black color than with In any case, I would buy it again if I had a need for it!.
The vent port does not have ridges, which means the tubing might slip off even when clamped. The fill port is of good quality, but is less sturdy than the original part. 1. The main fill tube is slightly smaller than it should be. It will be loose for 25 inches of tubing. You need to be very careful when installing the center assembly since it can twist.
part, inserted center part, and then realized that the center part screws in and has no stop. This results in the center insert coming out when you screw the cap on. Very poor design with no thought put into this product. It is important to lock the center piece in place. A large part of this machine failed due to a manufacturer error and I will replace it.
I don't think you'll find one made out of any better material since it's likely to be brittle and not too strong. It should be installed slowly and not overtorqued. Be careful with A camper is nothing more than that.
The product looks nice, and it performs well. In addition to the top, the filler flange is also separately attached and can spin a little if the lid is I wouldn't be bothered if it was fixed, but it would be nice to have it.
I love it, it's perfect. They are more resistant to the sun than.