A 16 Amp SPST at 125-250 VAC, 3/4 h. The power supply operates between 125-250 VAC, 10 Amp @ 14 V (T), 3 Amp @ 125V (L) and is UL/CSA/VDE certified
The most common use for the wire is lighting, pumping, fans, venting, and in many other applications, such as RVs, bus conversions, horse trailers, haulers, campers, yachts,
A switch with bezel measures 5 7/16’’ wide by 2 7/8’’ long by 3/8’’ high
The single cutout dimension is 1 1/2'' long and 4 11/16'' wide
A switch plate and cover are included, and it is made in the U.S.
Questions & Answers
Switches such as this one can be used for both 115v and 12v, right?
It is true that some people do not know how to read dam specs before answering 16 Amp at 125 volts The voltage is 250 V, I give it a P
As stated in the description, this switch can be used with either 125v or 12v, as it is rated at 16 amps at 125v and 12 amps at 12v The compressor runs on 250 vac at The following numbers are in 125 - It has a minimum voltage of 250 volts, 10 amps at 14 volts (t). Can you tell me if I'm ?
That is correct just make sure you don't exceed the maximum
Is there a limit to the amount of current that each switch can handle?
There are about 20 of us
Selected User Reviews For American Technology Components Quad SPST On-Off Switch with Bezel, 12-Volt, for RV, Trailer, Camper (Almond)
The form factor looks good, but it has some It is nice to have a compact 4-switch bank, but I am bothered by 2 flaws
A mini spade connector is found on the back of the kit As a spade. There is a difference in size between the two As I wasn't able to locate the mini female connectors, I used the regular insulated connectors instead. Only one side of the connector actually makes contact with the switch.
The second problem is that these switches seem to be very loose. It's not as if they are 'clickable'. In my camper van, I mounted the modules under the counter, and I hit them with my knee all the time and turned the unit Ideally, I would like the switches to have some resistance so they can stay off, and to let me know when they are turned on. In addition, the switch bank is easy to mount and the four switches look good. There are no unsightly stains on the cover plate that covers the mounting plate. Although they are good at their jobs, there is always room for improvement.
| Jun 11, 2021
It's hard to find buttons that aren't too big
It is not elegant to have such large buttons. The item needs to be returned quickly, but, after watching a YouTube video on Amazon marketplace, knowing that these items are most likely sent to landfill, it makes me feel bad to have to do that. Hopefully I will be able to install it, if it still bothers me a few weeks later my decision will be made to.
| Jul 01, 2021
There was a lack of packing for the One of the switches that come with this device had the prongs bent against the back, just like others have reported in other reviews
The prong broke when it was tried to be straightened carefully.
| Apr 18, 2021
Only a couple years into it, there have already been many failures
There are 7 of these switches in my converted van, and I've experienced several random and unexplained switch failures in recent There have been 3/7 switches out in the system that have had to be replaced and reliability is now in doubt. In my kit, I keep several spares because failure has become as normal and inconvenient as it is.
| Jan 21, 2021
In-Line Quad SPST Components from American Technology Components The good it does is evident
Be aware that clips should be used and should not be snipped. It is not heat resistant since it is very light in weight. The first one was destroyed.
| Aug 17, 2020
The must have when remodeling an RV with multiple switches
I use it when removing walls and it works great. The system works really well.
| Dec 16, 2020
Those switches also make a three-way version so you can operate them from two places
It has a very nice look and is of good quality. This is a great way to modernize switches.
It is easy to This product is a great upgrade for the models of last year
| Apr 06, 2021