Air Lift 21838 Union Tee
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A separate purchase is required for the Tee.
This 21838 fitting is for tee shirts. Look at the 25592 compressor, it has a compressor along with an on/off switch, a gauge, and a tee.
An additional tee is needed if you are planning on adding another port for adding air. The end of the fitting can also be fitted with a fill valve.
Selected User Reviews For Air Lift 21838 Union Tee
It's a great product and it made the installation of my air lift system much easier. At the same time, I am able to fill both bags with air.
Two shraders, one for each bag, do not make sense. You may end up with air in one bag and no air in the other as a result of a leak, which can lead to an This product works well. You can put 100 lbs in these bags and they won't leak.
made it much easier for me to connect the Air Lift with a quality connection and to use a single connection on my license plate for the ease of filling them at the same time or relieving pressure from.
As soon as I decided to tow, I adapted the airbag system so it could operate from the onboard compressor, but I also put in this union as well as a manual air fitting in case it goes out. I was happy with the results. My kit came with the same ones, and they were very easy to install and did not leak. Keeping your cuts straight and cleaning up any cuts that need to be cleaned up will make the end result look better. It's best to push in until the button kind of clicks, and then press past that till it settles back down. This is an easy process. It is also possible to remove them by compressing the little flange and pulling out the hose.
Due to the fact that I had our tire guy install it, I can't speak to how easy it was to install, however having this feature is important to have when you add airbags The two bags can be tied together in this manner so if one bag loses air, both will, and the chances of a dangerous accident are greatly reduced.
Buying two of these was a good investment for me. The first one was installed a year ago, and the second one is being installed now. These are used to connect two air shock lines to one air stem for the purpose of checking and maintaining pressure (I use Goodyear Ride-Rite I really like these- The seals are not leaking and appear to be strong enough to handle out-of-the-box Driving in the winter and on the road.
The Air Lift Tee is designed for use with the Air Lift System. A tee for the Firestone Ride-Rite system was needed, and this tee was perfect. If it fits a 1/4 inch OD tube, it should work. To connect the air valve to the tubing, I went to Home Depot and bought a 1/4-inch OD translucent polyethylene tubing that matched both sizes and maintained its leak-proof properties. Free of charge. HSPEB25 is the part number The maximum temperature is 125 degrees Fahrenheit The minimum temperature is 33 degrees Fahrenheit Three dollars. I will charge you $50 for 25 feet. Southern California should be able to accommodate these specs There are others who may want to search for better rated tubing, particularly low temperature tubing. Adding the tee to my system was due to the fact one side of my system would leak quicker than the other. The leak meets specs but it is still a pain to have to sync air pressure so that one side does not By using the tee, both sides of the air pressure are equalized.