XtremeVision 35W AC Xenon HID Bundle with Slim AC Ballast (1 Pair) and H1 10000K - 10K Dark Blue Xenon Bulb (1 Pair)

The size of this item will fit both high and low beams.

Skyla Gordon

| May 20, 2021

This is the fifth CX I feel 7 and RX-like You can buy this kit everywhere, I got mine through Amazon.
How To Install H7 Aftermarket Xenon Headlight Kit Light On Headlights"
Or similar, I got mine through There are also a couple of things that you will need to modify about these adapters. The pins are a bit too long, and it has some corners that need removing. To modify each one, I used a bench grinder and took 45 seconds each. Your dust boot will reinstall perfectly, and for me that was a must. As an option, I also installed the add-on relay kit that uses direct battery power to run the HID's. I have only briefly checked but could not tell the difference between the two. This is a pretty tight fit on a Goldwing, and these aren't the most fun to install, but it all works perfectly and is definitely worth the effort. They have a lot of brightness as well. I have updated A barrel type of choke cannot filter out the RF radiation in ballasts because there is too much RF radiation that can't be filtered out with ferrite beads. It's too bad because they worked well as a light.

Dominick Barnes

| Sep 07, 2020

The reason I gave this 3 stars was not because they didn't work or didn't ship on time, because they did actually arrive almost a week earlier, so thank you. It was because I ordered the 9007 bulb instead. It should have come with better instructions since the wire was intended for a 9004 and when the PNP connectors were connected to the wires going to the bulbs, the output was reversed, and there was no indication that this had to be done. Due to the harness inverter, I do not have to clip it in, and it works fine. In either case, the product should be a direct fit or at least notify you that the output polarity may need to be flipped. Despite the fact that the blue harness wire was correctly secured, why was the ballast output wire not secured?.

Lawrence Barron

| Jul 04, 2021

Plug and play is no longer an option, is it? By the way, it would be nice if you could actually spread out everything and take a picture of what you'll.

Anna Hanna

| May 10, 2021

According to the description, the product was excellent. For those with automatic DRL lights, installation may be a challenge. For my lights to work properly, I had to cut a wire. It is likely that you will need to have a dealer or other professional install these for you if you cannot do it yourself. It is too early to tell if the lights are of good quality, but they are working fine right now.

Carlos Aguirre

| Nov 25, 2020

I'm not quite sure how it works. It's been a while since I've tried multiple error cancellation/anti-cancelation strategies I've tried a number of flicker capacitors and they are not working. If I put it in drive, they will be fine, but when I remove it, they will begin It will turn off for a second and then turn back on for 10 seconds You will have to wait 15 seconds before the flash stops.

Andre Berry

| Jul 23, 2020

I don't think these are the best lights. The cons are There isn't a lot of light coming from it. Every few months, you have to change them out for new ones. The pros are I can't believe how bright the lights are! This is an easy to install product. My experience with the Customer Service at Malibu dealership was excellent (even though I have a 09' Malibu).

Christina Allen

| Feb 23, 2021

I had a color issue with a bulb and an elderly ballast that was not working. I was well taken care of by the customer service staff. Make sure the company you buy from is reputable and one you know will stand behind their warranty and provide great customer service like Xtreme Vision. They provide quality products at a competitive price. Highly recommended for these reasons and their competitive pricing.

Kara Fuller

| Jan 21, 2021