Error Free LED License Plate Light Lamp Assembly Replacement For F150 F-250 F-350 F-450 F-550 Superduty Ranger Explorer Bronco Excursion Expedition, White LED Lights
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
They work just fine for me after I installed them about a year ago
They might work with your 2020 Expedition, but I am not sure. This is the pair I ordered for my 2007 Ford F-150 The 150 should work fine. I would suggest you check the website by entering your 2020 Expedition in the "my Vehicle" section (or whatever they call it). It should then inform you whether they will work. Wishing you the best of luck!
It might be right for it, but I don't know
There is just one piece of the display, but mine works well and is
Selected User Reviews For Error Free LED License Plate Light Lamp Assembly Replacement For F150 F-250 F-350 F-450 F-550 Superduty Ranger Explorer Bronco Excursion Expedition, White LED Lights
It seemed that the light from the OEM puddle lights in my 2017 Ford Expedition EL Limited didn't reach the ground because they were so yellow and dim. In fact, we did not even know they were there at first.
The old lights pop out easily, you just need a video if you need to see how. *Numbers 7 and 8 are located on the OEM lights, while numbers 18 and 19 are located on the mirror casing. This light has a black wire and a red wire. On these new lights, there are a black and red wire with flat connectors that match those on the OEM light. Upon making the connection, connect LED red to LED red, LED black to LED black and the connector tabs are exposed and can touch the LED grounding this out. It is recommended that they are at least covered with electrical tape. As the first step of the installation, I applied some bulb grease to In order to fit the LED connectors firmly, I took a pair of pliers and gently squeezed the tabs on the wires coming out of the mirror. A 1 slipped from my fingers I put a one-inch piece of shrink tubing over the wires before making the connections (instead of electrical tape), and then I sealed it with a heat gun (a small lighter will do just fine). It made a nice moisture-tight connection and made sure the wires wouldn't short circuit. It was easy to pop the lights back in after they had been wired up, and the fit was excellent! It is amazing how much light is produced. A total of four lights are affixed to the vehicle's side. I have attached a It is not dark outside, nor have I used a flash. I did not have the lights on or the outside house lights on. In the future, we will know how these LEDs will hold up to wear and tear. (UPDATED, 2/23/2020) My second set is for a 2017 Ford Fusion Sport. They fit perfectly and are as bright as the first set.
My husband and I purchased these license plate lights so my license plate would have some enhanced lighting. Their Prime shipping allowed them to arrive in 2 days. In order to avoid damage, they were packaged. As soon as I saw the instructions, I realized how limited and weak they was. I was unable to locate any of them for the item I had It then became apparent to me that I was on my own. There are plenty of videos on You Tube that explain how to remove the old devices and put in the new ones. My Putco taillight bar now appeared to be interfering with them after they were installed. The issue seemed to disappear after I cycled the engine on and off a few times. As soon as they were working, they were perfect. In line with many other reviews, I can confirm the following I am very impressed with the brightness of these things! However, the idea of making it possible for motorists to follow me to know exactly what is in front of them appeals strongly to me. By doing that, I believe it gives them a clearer picture, and I feel safer in the long run. The design is really cool as well. Purchased for $26, it was a smart decision.
It went in flawlessly on the driver's side. What about the passenger side? I'm not so sure. I did not like the size of the housing on the led light. Approximately 1/4" would be my estimate. It flickers now after having been filed down. There are times when it does not even appear. I have found it to be mostly effective though. Trying to exchange them will be my next step. After I update, I'll post.
The LED license plate assembly snaps into the wire clip, then snaps into the hole on the bumper to complete installation. A snug fit and bright colors make it a great choice. I would highly recommend this product. It is easier to undo the original light assembly from the outside than it is from the inside this is usually a challenging process.
As soon as they get to To ensure I never have to deal with a burned out light again, I bought these. The first thing I noticed about these is that they are The chrome bumpers are actually too bright for the people behind you, especially with a chrome bumper. I was followed on a trip by my buddy, and he wasn't happy about it. The one who is dying after only a couple of months has already passed away. However, it is not bright enough to even be seen unless you are looking at it directly.
Under one of my truck's mirrors, I recently lost power to one of my Puddle Lights. When I first noticed they were sealed units, I thought I would replace just the bulb, but I realized it was much easier to replace the whole light. Your LED lights were affordable and I found them on your site. The idea of trying them sounded good to me. *Right after that, they came two or three days after that. On the new LED lights, the wires were terminated with male connectors, while on the factory wiring, the wires were terminated with female It took very little time to connect them. However, the longest was shrinking the Heat Shrink Tubing that covers the connections so that they won't touch each other. As you can see, this project doesn't take a lot of time. It took me about ten minutes to put the new LED lights in place as well as tidy up the tools. Takes fifteen I'm so glad I've upgraded to these LED lights. They're much brighter than my original ones. As with factory lights, they come on bright and fade to OFF as they fade. There's no reason for me not to be happy! You won't be disappointed with your purchase! It was a pleasure working with you!.
You get a better understanding of why some had problems when you see how it's designed to plug into the bulb socket instead of into the wiring. As the wires in the lights and around the socket get wet under the truck, I decided to hot glue them to prevent water from getting into them. The longevity of this study will be reviewed again in six months.
This is a very close match to the color temperature! There are a few changes that need to be made. The following images can be viewed. To save a few dollars, I tried another brand - they were horrible and smelled horrible You can see the following The top of the unit had to be filed down to fit my 2016 Ford Fusion, so I had to file down the outside hump on top of it. My final step was to add shrink tubing, connect, test, shrink, and I was finished!.