Remflex 6005 Exhaust Collector Gasket for Mopar, (Set of 2)

$ 14.39

Score By Feature

Based on 64 ratings

Giftable

9.90

Customer service

9.70

Satisfaction

9.70

Packaging

9.80

OveReview Final Score

How Our Score Is Calculated

Product Description

Ensure you are using the right model by entering it in your system.

2-1/2" Pipe Flange, Mopar Exhaust Collector Gasket 2-1/2", 2 bolt holes (one slots), 3-29/32" Bolt Hole Spacing, 2 and 4/set Part Number 6006.

The headers and manifolds gasket must be adjusted to maintain pressure when heat or cold is applied due to warps between them, which can be completely sealed by Remflex gasketing with 100% graphite rubber that has good resistance to heat, humidity and cold.

Specifically designed for single duct exhaust, Remflex gaskets come with a standard diameter of 1/8-inch and a crushing factor of 50 percent that allows them to fill any large pit (up to 1/16 inches long) or gap on the flange surface up to 50 percent per square inch.

There is no matter which angle of the aluminum cylinderhead (steel headers or manifolds); both configurations will cause gaps in the mating gasket due to the contraction and expansion of their identical materials; Remflex exhaust gaskets are fully-penetrating and ensure safety for the entire fan.

The no-separating composite material does not affect Remflex exhaust gaskets due to its rigid nature, so the gasket is likely to shrink or harden due to time or temperature. This eliminates the need to reapply tightening to your flange bolts as frequently.

Questions & Answers

will fit my 2015 scion themed my 2015 scion frs?

The performance will be perfect on my Subaru BRZ's cat back exhaust. They did not change the settings at all.

Selected User Reviews For Remflex 6005 Exhaust Collector Gasket for Mopar, (Set of 2)

What a great choice! You can build strength

4/5

As I had two different sized pipe tubes fitting into my vehicle, my collegue suggested I try this product since I needed an gasket. There was something that moved from Remflex's gripshite gasket set to my home. Having said all that, this gasket is one of my all time favorites when it comes to gasketing any exhaust coupling. It has little or no thickness, so they tend to seal worse than they should be if their material is metal. To find out, the gasket now has a thick layer. The fabric is often "crushed" into a perfect fit since it's light and fluffy. The open end of this particular type enabled it to be thoroughly adjusted before it was buttoned. However, there is one crucial point you must be aware of: A very fragile item. Because it is fragile enough that when it is stretched too much, it can literally fall apart. Since it will only work as a sealant to remove items and replace the exhaust, it would not necessarily work any other job besides replacing any exhaust bolts or removing those items. As a result, your hands will be filled with one of the best gaskets ever produced.

Leighton Montoya

| Sep 17, 2021

In sealed condition

5/5

The cars I owned had two-bolt gaskets that I have used. These are also the next best option for those with Subaru STi vehicles, Nissan 300ZX vehicles etc. They don't have the MLS Stainless gasket. The material is extremely thick and very well sealed. It is excellent value and highly recommended.

Esperanza Fletcher

| Aug 05, 2021

There is no harm in paying the price

5/5

The gasket is among the top-notch ones. The gaskets blew out on my 1971 AMC Javelin SST have always forced me, whenever I drive headers, to close all the doors regularly. The best gaskets made my gasket, and sometimes the least best ones, and each one ended up going out eventually. Compared to all the other gasket I have used, these are the ones that lasted longest. There have been no leaks since they were installed. Some of them may be cheaper than others, however, I get what I pay for it. I have used the most common gasket for my experience.

Jonas Bryan

| Oct 20, 2021

Exhaust leaks are fixed

5/5

A leaking exhaust even after using the original factory gaskets caused a serious malfunction. One part of Remflex gaskets that worked made all the difference. The products were great.

Nolan Bartlett

| Oct 28, 2021

My flanges were having problems unopened when I sealed it from what the manufacturer called "meh

5/5

". In my opinion, the large thickness was a huge plus. My BRZ wouldn't have fit through the exhaust in place of a OEM cat. Therefore, it sealed the connection.

Emilia Cardenas

| Mar 02, 2021

It is good and stable

5/5

Putting the body in the right shape is a good strategy. A long-lasting system will likely exist.

Titus Norton

| Dec 02, 2021

fantastic!! This item makes a perfect fit for all of the performance parts you’re installing: I can’t believe these kits aren't only stocked with these but are also stock with thousands of dollars worth of performance parts

5/5

Working with American manufacturing and they work!.