TOYOTA Deck Rail System
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is no CrewMax double cab with this, but there is a CrewMax. I need a 5 for this assignment. It is a 5 foot bed, not a 6 foot bed. The Double Cab has 5 more than the Standard Cab.
In fact, yes. Cleats can be used or removed without tools thanks to their ease of removal and reinstallation. It might be necessary to remove and reinstall the rails The problem is, you would need to have A panel of threaded anchors is installed on the bed for use for anchoring the rails. In any case, repeat removal is not recommended. It is likely that would result in loosening of the rails.
You can use them with all 2007-2012 The 2018 Tundra Crew Max is a 4x4 vehicle
T-shirts are the only thing they have The screws are Torx 30. The installation is incredibly simple.
Selected User Reviews For TOYOTA Deck Rail System
I found three rails in the box when I opened it. The instructions are very simple to follow, and installation should only take you five minutes. In the interim, they have temporaries So that you don't have to screw them down while you assemble, you just put them on the studs and The four screws I found in the box were on the ground. When I went back to the box, there were four screws loose. all there is to There was no package in which they were supposed to be and I wasn't sure how many there were supposed to be. For your information A total of 14 should be in place. For the bulkhead rail, we need four, and for the sides, we need five. My lowe's had M6, 1 inch x 16 screws, so I went there and bought a few packs of them The price is $1 for five. A pack of three was given to me on February 22. * If you must get your own, make sure it is about 3/4 to 1 inch long, and you need a small enough head that your socket fits between the rails to tighten it, even if you have to get it from Home Depot. As an added bonus, I was able to fit one of the sockets with a 10mm socket and clear between the rails without any problem. They feel well made and are well constructed. There's a lot of good stuff in them for me. I would give it five stars if it weren't for the fact that I had to stop, drive to a hardware store, and lose an hour, and due to having to close the truck up. There's no doubt about it this does fit my 2018 Tundra CrewMax with a 5'7" bed perfectly. You can pair these with either a Truxedo toolbox or Deuce2 tonneau cover if you are in the market for a tonneau.
Even though many have found this rail kit easy to install, it took me nearly two hours, with several short trips to the hardware store, to install, and what should have taken fifteen minutes took two hours. My brand-new 2017 Toyota Tundra Crewmax with the short bed was installed with this product. *1) This kit uses unusual Torx T30 bolts with stepped shanks, and a thin shank at the end and a thick shank at Due to the lack of a Torx T30 driver included in the kit, I had to buy a driver with an impact rating. Trip to the hardware store 3) Some of the bolts screwed in easily, but the bolts at the ends of the rails were extremely During the attempt to slide in the last one, I managed to strip off the heads. A new bolt M6x1 with a hex head was available as a replacement, although it was only 18 mm in length. 3) The instructions also tell us that we must finally tighten the bolts with a torque wrench up to 66 ft-lbs Weight lb. There is, however, a 25 ft-line at which the heads start stripping off There is no way they would stand up to 66 ft-tall force if they weigh 66 lbs Weight lb. Be prepared to play all these games if you buy the kit The following can be done in advance *a) Purchase an impact-rated Torx T30 driver bit*b) Spray the bolt threads with WD-40 before installing. They fit better at 40, so they don't stick out as much.
You will find everything you need here, with the exception of a wrench, in the OEM install kit. I think I was in the installation process for 15 minutes in total, from opening the box to throwing out the trash. The situation doesn't get much better from here. Despite the fact that I am a mechanic by trade, just about anyone who can read the directions can install it in about the same amount of time. It's best to have a torque wrench when installing the rails, but it is not required. My overall opinion of this purchase is very positive. Installing it was very simple and much less expensive than going to the Toyota dealership (stealership).
I was very pleased with how everything worked and lined up perfectly along The only thing I did was get a drill bit that fit the screws, and I didn't drill the screws into the truck bed. The torque I used was just enough to keep the hardware together without stripping it. I would highly recommend this product. This is an excellent product that can be installed easily. Including the time it took to remove the package, I estimated 10 minutes.
My decision to buy the Toyota part over making my own rails was entirely based on fit and finish. I read one review that said these were supposed to be torqued to 66 ft pounds. Read directions 7 and then you will know it's wrong. The wavelength is 5 nm or 66 nm. The weight of five inch pounds. You can ensure the threads are secure by applying a little blue loctite. The added bonus is that I didn't realize they came with four cleats when I bought them! The surprise was awesome. I am very satisfied with my This took longer to get out of the box than it did to install. I recommend that you use WD40 to clean out all the holes and using one of the screws to do so. It won't take long for you to realize the benefits.
This is a great accessory for your back of your Tacoma or Tundra, but make sure it matches the length of your truck before installing it. In addition, make sure your truck's bed doesn't have any linex or plastic bed liners covering its holes. If you pass this point, you might as well head to a hardware retailer and get higher grade hardware because the factory-sourced hardware is so cheap and buttery soft that the threads split easily. In this case, the bolts are either stripped or broken. Take your time to make sure the job is done correctly. Pay an extra few bucks for the good hardware and take your time. The easy jobs are usually the most difficult to complete. Once installed, it's great and should.
This is exactly how I replaced the system on the truck. A spray-on application is all that is needed to install it on the brand-new 2020 Tundra There are bed liners on the bed. Furthermore, the tonneau cover incorporates the new fabric. The book is highly.
It is very easy to It is not possible for me to use the front rail since I will be installing a Retrax Pro Tonneau Cover, and its installation instructions require removing the front rail. So I did not bother putting it on since the cover should arrive Please consider
.
Related Products For TOYOTA Deck Rail System
