OXILAM 3157 LED Bulbs Brake Lights 2800 Lumens Extremely Bright 4157 3157A 3057 3156 LED Bulbs for Tail Lights Brake Lights Brilliant Red (2 PACK)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It depends on your vehicle if you need to use a resistor pack.
Probabilities are not good. This is a bright set of tires for my 2014, and I used it. Extremely Bright Xenon White LED Bulbs With 24303035 Chips Used In Reverse Lights, 921 912 3035 Chips from JDM ASTAR
There are two possible solutions to the hyperflash problem on most vehicles. Depending on the vehicle, you may be able to change to an LED Flasher or use a resistor pack to overcome it.
Selected User Reviews For OXILAM 3157 LED Bulbs Brake Lights 2800 Lumens Extremely Bright 4157 3157A 3057 3156 LED Bulbs for Tail Lights Brake Lights Brilliant Red (2 PACK)
In contrast to other LED bulbs, this one has a housing made of aluminum with a chip that is very solid but light in weight and seems designed well to dissipate heat. One of the most impressive things about this version is its size. Approximately the same size and location as an incandescent bulb, the LED chips are in the same position as the filament of a factory incandescent bulb. since the factory's bulb housing and reflectors are designed around the shape and location of the As a result, your light output should be more even. I found the connection pins to be durable and didn't seem to be able to bend out of shape easily. The base of the guitar is plastic, but it is heavy duty and very tough. I did not mention that in my review. It doesn't feel cheap in the slightest. My experience with LED bulbs (specifically 3157 bulbs with a power supply) over the last few months suggests that this one is of highest quality, even compared to some that are much more expensive. It should also perform as well as incandescent bulbs, certainly much better than them. It is a very well made and high quality product overall and for the money it costs. If you are new to LED bulb replacements, don't forget that for a bulb that is being used for a turn signal, the load resistor is needed to prevent the bulb from "hyper-inflaring. " It should have the same color as the lens it will be behind if it's "flashing. ".
They were so bright that I had no idea how they would look, but I am glad I took the chance and put them on TO FIX THE HYPER FLASH, I NEED TO BUY SOME RESISTORS!.
It has a 6-point scale A watt equals 50 ohms I was able to disable hypertension by using a watt resistor While also keeping these bright, flashes should not be used on the vehicle. Due to their bias towards a more amber/orange color, these "red" LEDs are not very red at all. Colors are not important if you do not care about them. The Oxilams are right here for you to buy. The best LEDs on Amazon are without a doubt these. Nevertheless, if you are like me and do not think having an orange brake light is a good idea, then read on. Compare and contrast When put side-by-side with a red Alla Lighting LED, the Oxilam appears almost amber in color. Neither Oxilam nor Alla Lighting do not make use of steel materials. In terms of brightness, they are about the same, but this Oxilam has a much better distribution of light. As well as feeling more sturdy and more well constructed (GFRP base and thick leads), the Oxilam is a much less expensive Alla Lighting with cheap ABS base and A more compact Oxilam is also closer in size to a halogen, so you are most likely to get more light while inside your reflector housing. It would be the Oxilam if I wanted a single light that was not going to be adjacent to another red light (further causing the amber / orange color bias to become more apparent). If, however, you are seeking to match red LEDs from various manufacturers, then the Alla Lighting will likely be a better match than the Oxilam's amberish color. The reason I chose Alla Lighting LED was because of the low power consumption. As a result of their orange/amber color, when I braked at night with the Oxilams it would appear that the hazard lights were on, which I thought was very unsafe. Here are my reasons for returning the books. It's just a matter of fixing the color issue for Oxilam, and these would be great. I either ended up getting a bad set or I got a bad set anyway.
The following item The Oxilam Group +1 3157 3157 Light emitting diodes Extremely bright bulbs for turn signal lights - A amber yellow 3156 3047 4157 3057 LED bulb - This bulb will fit both the Type CK and Type Standard (2 PACK)
It appears to be similar in brightness to LED 3157 Bulb - Heavy Duty - HD 4014 - Alla Lighting 2 x SMD 4157 3457 3156 3057 3157 LED Bulb 3457A 4157NA 3157A Amber Yellow LED Turn Signal Blinker Light (Set of 2) - *bulbs. My brightness check was done with just my eyes while about fifty feet in front of my truck. I used an Alla in front of the driver, and an Oxilam in front of the passenger. I mentioned in the above comparison the Oxilams were compared to Allas around two years ago. Both the Oxilam and Alla are currently available at the same price of As of Sep 12, 2019, one can find it here on Amazon for 99 cents. In my truck, the bulbs are mounted at the rear of the light assembly so that they face forward or rearward when the bulbs are The light pattern fits my needs, so I am fine with it. There is a possible effect on the light pattern if you have assemblies that mount the bulb from the sides, top, or bottom. In comparison to the longer Allas, the Oxilams are more closely matched to 3157 incandescent bulbs, so they should be more fitting in common fixtures than the longer Allas. There is one area where both bulb manufacturers can improve, and that is the flashing brightness of the light over the typical.
The LED lights in my 3157 are extremely bright and I am very pleased with them. A very high level of quality goes into making them They are of the highest quality and my opinion is that they are the best. In addition, I was very well-served by the Customer Service department. They were responsive and helped me resolve the hyper flash issue being inherent in my make and model of For finishing the front and rear exterior conversions of my 2003 GMC Sierra 2500 HD, I have also purchased additional Oxilam LED lights.
A turn signal, daytime running lights, and more The hazard lights are integrated into the same bulb on my vehicle and all of them work as well without a Even in broad daylight, the lights are very bright and noticeable. Very pleased with this purchase. I would buy it again.
The item I chose would not last as long as I anticipated. My lightbulb is failing completely after only a few days of installation. Installing this bulb is as easy as installing a regular lightbulb on a car. My tail lights are visible on my home driveway after daylight saving time. I didn't notice this until after daylight savings time. As for my passenger - The side bulb fails to come on (for either tail light or brake light operation). I replaced the bulb with one from the opposite side, and it can operate now. There is a circuit fault on this one bulb and it will no longer work. I have had it about 3 months and I can not say if and when it failed. Due to having it on before daylight saving time, I am unable to recommend it.