SUPAREE Plug & Play Spare Tire Brake Light T- Style Wheel Light 3rd Third Brake Light Compatible with Jeep Wrangler 2007-2017 JK JKU YJ TJ,Red Light
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
you did not need to splice or cut wires for this, it is plug and play.
As soon as the brake is applied, the warning light comes on. There is a wire going to it that is connected to the third brake light
Sequential lighting is available on the T style of the light when it is turned on, but it cannot be sequential when it is
There is a diameter of 2 in the inner ring. The diameter is 8 inches.
Selected User Reviews For SUPAREE Plug & Play Spare Tire Brake Light T- Style Wheel Light 3rd Third Brake Light Compatible with Jeep Wrangler 2007-2017 JK JKU YJ TJ,Red Light
As a result, the 2020 JL Jeep will not work with this product. To install, it took 3 1/2 hours, but it did require some modifications. As of 2020, the structure supporting the 3rd break light will have a new look. A wire channel can't be fitted into the slot provided with the wires because the wires used are too thick. A section of the thick insulation had to be cut away to expose the wires so they could be routed as tight as possible. It is impossible to reassemble the break light support structure unless this outer insulation is removed. Furthermore, Jeep's 2020 models have a significantly smaller space for running the lines that connect to the break light plug than the 2018 or 2019 models. As you can see, there is very little room to tuck in the bulky connector, insulated wire, and extra lengths due to the very tight space. In my 30 years of experience in equipment and vehicle design and fabrication, I have been a mechanical engineer. Having to make this modification was one of the most frustrating I have ever had to do to a vehicle. The installation for the earlier models I am certain will be As far as the 2020 is concerned, it is a very unpleasant journey.
This will result in great results for you. It has been on a lot of jeeps and I wanted one of these lights. The installation process has been outlined in several YouTube videos and I felt confident I could complete it. Well, because I had a bad case of the flu Once the wheel was off, I found that my tire wrench did not fit my lug nuts. When the wheel was off, it was easy to remove the rest of the lug nuts. We are talking about a two-part article The job requires one person. There is a problem with the cable, but electrical tape can deal with it. Keep the wires well insulated by ensuring that they are taped up so that water or dirt won't contaminate them. It will take some work to put in the brake light mounted on the rear tire, as the wiring will have to fit in a very small space and will cause the Get a good fit by taking your time. Each time you tighten it down, you will need to add one screw at a time. I give the product a five out of five. Awww, almost forgot to thank you for the directions.
I edited it My decision has been made to return this garment after wearing it a few days. Unless you break the plastic, you can't torque your lugs down tight enough. I was pleasantly surprised that the installation was very easy and it only took about 5 minutes. This is one of very few jeep mods I've recently made that keep their promises of being plug and play I am playing. *Having said that, it is made of cheap plastic & has a cheap feel to it A wheel holder is designed to get sandwiched between the wheel and the tire If you tighten the lugs down as much as you normally would, I guarantee that you will crack the cheap plastic, or over time it will simply fall apart. *Be sure to check your lugs frequently to ensure As of now it's so cheap that it's worth trying Initially, I was thinking about an easy fix, but once I get my spare tire carrier mounted, I will probably consider a more permanent solution.
As a Christmas gift, I did this for my wife, so that she could put it Despite the fact that the instructions provided with it were vague and could be more helpful, we were able to complete the task. As far as the wiring was concerned, it was difficult to tuck it back into the space that was available. Aside from that, I think it went smoothly and I am very pleased with the result.
Please click here. The one I saw looked similar and I liked the way it looked. With my new 35-inch wheels, I noticed that my 3rd brake light was higher and less visible than before. There was a small human, hidden on top and behind that big tire, and that was all I needed to convince me to buy it. Besides the safety, lots of people comment on how well it works for them. There will be no doubt that the driver behind me will notice that I am The installation was surprisingly easy, in large part because you do not need to cut or splice any wires, you can plug it in directly to the existing connector, and then plug the existing third light into the new The instructions are easy to follow, and the lights do not appear until they are turned on, so it appears just like a disc brake until they turn on. Even though they are very bright at night, they do not annoy you. Don't buy one where you have to splice the wires, as you also take a chance the splice will corrode or come undone, which will cause the light not to work.
I plugged it in and it mounted immediately. It hadn't occurred to me that it would light up in a pattern, but I think that's a plus. Our new device satisfies all our expectations. It is bright and works as expected. In addition, I like that you cannot see it behind the spare tire. It just looks like.
The brake light on this 2018 Jeep JKU was very easy to install. A little more than fifteen minutes were required. Despite being very bright and having a chase feature that looks cool, the product itself is not very impressive. If reinstalling the third break light, I suggest using electrical tape to secure the wires in place so you can easily reassemble it. It is easy to follow the instructions. An excellent product! I highly recommend it!.
Please click here. A minus one star is deducted for the excessive thickness of the conduit or wrap enclosing the wiring harness. The wiring needs to be adapted to the existing wiring. This is not an easy project. Once I had it in place, I squeezed it for a few seconds and popped in the screws. Other than that, this is an excellent product, with good instructions and a super simple plug-and-play process. I like the look of it It would be great if there were a switch that turned sequential on and The Rubicon 4xe for 2021 by JLU.