* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
MaxxAir 00-325001 TuffMaxx A/C Shroud - Polar White

MaxxAir 00-325001 TuffMaxx A/C Shroud - Polar White

MaxxAir 00-325001 TuffMaxx A/C Shroud - Polar White
$ 146.09

Score By Feature

Based on 618 ratings
Durability
9.91
Easy to install
9.70
Value for money
9.52
Sturdiness
9.13

OveReview Final Score

How Our Score Is Calculated

Product Description

The fin guard is integrated into the rear of the boat
A thick, extra-tough UV-protected plastic with extra thickness
Designed to prevent injury to the A/C condenser coils, the rear intake grill protects them
U.S.A. is the country of origin
A unique design on the front bumper offers protection against tree branches and wind lift

Questions & Answers

The coleman model 7333A8664 uses this shroud. Do you think it fits that model? Thanks so much. ?

I was able to use it with no problems and look like new again. According to Maxxair the 11K and 13 can be fitted with this unit. Each of these units sells for 5K and 15K. Whether Maxxair is right for you can be determined by contacting them

The kit fits the Quick Cool High Efficiency mod #3107549 by Duo therm? As well, I need to get a gasket installed Does it have a roof? If so, can you seal it?

A new cover was installed on my Coleman tsr 7300 series ac and I did not have to re-seal It comes with new hardware and foam for the cover to be attached to the There was really nothing complicated about it. As explained in the instructions, you unplug the solar charger and remove the old hardware. The cover falls off easily and you place sticky foam on the ac. The top cover is slipped on the solar unit and hardware are then replaced and plugged in again. I think it took me 15 minutes I'm 20 minutes late. This kit did not include one to replace the cover, and I didn't need to replace the ac seal between the unit and roof in the first place. This might be of some assistance to you, John

Are there any dimensions for the bolt pattern?

There is a universal version of this unit that is supposed to fit all different brands of air conditioners (44x32x14).

Can this be used with the Mach 3 PS HP Arc Would you mind if I say thanks?

Yes, this is a good You only need to check the dimensions of your AC unit.

Selected User Reviews For MaxxAir 00-325001 TuffMaxx A/C Shroud - Polar White

In terms of fit, function, and appearance, the Coleman Mach III has it all
5/5

When I pressure washed my car hauler in preparation to coat the bare aluminum roof with a reflective coating, I noticed a few holes in the It disintegrated when we hit it with the pressure washer. That one looked like it would fit, and it did, it is much heavier than the others. In the rear, the foam baffles did not work It would not stick to anything when I took off the old bandage. When I took off the old bandage, the adhesive This was fixed with a couple of sprays of 3M weatherstrip adhesive. Other people have noted that the front mounting holes are about 1/4" too far rearward. It may be worth elongating the slots towards the front before you lift I used the old screws because I was provided with nuts and washers, but my unit came with nuts and washers. It was a good opportunity to clean out the A/C unit with the cover off, and get rid of the nest of dirt dobbers. In addition to making the trailer itself appear newer, the new cover shows how bad the old one looked up there.

Fabian Rodriguez
Fabian Rodriguez
| Mar 27, 2021
Fits like a glove
5/5

Over the flimsy OEM cover, this is a great upgrade. I used this on my Coleman A/C unit and it fits perfectly. Compared to the original, this is a far better version. Sturdy in feel. The bolt holes were near enough to be able to use them without requiring any alterations as previously said. A set of stainless nuts and flat washers is included. The screw on my unit was a machine screw. As well as the original washers, I used the new ones. comes with new foam to seal the ends of the condenser as well as a grill to prevent the vanes from being damaged. The new cover is a fantastic replacement for the original flimsy OEM cover (which the manufacturer failed to do). It's no wonder you see them (flimsy OEM versions) on the side of the freeway all summer after blowing off motor homes and travel trailers on the highway.

I only had a problem with delivery of the package. The "guaranteed delivery" of Prime 2 Day was first of all. The first UPS shipment in their depot was lost. The fact that that happened hadn't even occurred to me if I hadn't been checking hourly. As my order needed to be delivered as soon as possible, I called Amazon. A support person had to search and find one for 30 minutes before she could get it going US Postal Service was slated to deliver the second package on Saturday. There is a LOT of material in this package. Although it was marked "out for delivery" (of course it is, since it covers a 15,000 BTU A/C), I got an alert when my phone said "mailbox is full". My mailbox is located Since we have always received every other package right from the Postal Service, it was no surprise that the box could not fit inside. It was needed to keep the pool cool during Memorial Day weekend, and we ordered it a week in advance to make sure there wouldn't be a problem, but there wasn't. The truth is, they never tried to deliver it at all. As far as the Post Master is concerned they have no alternative but to mark it "out for delivery", regardless of whether it will be delivered. It was never sent out of the post office! On Tuesday, we were able to pick it up ourselves. (This is our only choice, by the way. There was no attempt to tell us) This was only the Postal Service's fault but they still gave us a 25% discount because it wasn't delivered on time. It amuses me that they run TV ads "Our trucks are your trucks for delivery. " I call BS. Here's what I think on it. Considering I live in rural Maine, I can only assume that the Post Master only responded with "you should have called" when they failed to deliver the mail. It should not be possible or feasible for Amazon to ship over-sized packages through USPS if they cannot or will not deliver them. There's an easy way to do that. It's simply UPS's duty to "fulfill" the delivery, no matter how many problems Postal Service may have. I am (obviously) still pissed off about the lack of accountability of the shipping companies, so pardon the rant. This was a great experience with Amazon.

Emmett Richard
Emmett Richard
| Mar 28, 2021
This is a perfect fit
4/5

I put it on my older Coleman Mach air conditioner and it worked like a charm. In comparison to my old cover, which was brittle and cracked badly, this new cover came with some foam pads to seal the back end. This should allow more air to pass through the fins than avoid them on my older cover which was brittle and cracked. In my case, I used old screws since I had large machine screws, but this package said to use old screws. The package came with new washers and nuts for fastening down, but mine came with large machine I was able to use one who had been stripped on the head, but was pretty much destroyed. Due to lack of new screws, I deducted one point from the rating. But, nuts and washers were included, so why were screws not included? It looks great, though, so I am still very pleased.

Annalise Mora
Annalise Mora
| Sep 27, 2020
The Quiet Kool EQK 1100 or the EQK 1350 from Emerson fit perfectly with this unit
5/5

This product works great for those who are looking for a replacement shroud for a Emerson Quiet Kool EQK 1100 or EQK 1350 AC unit. A stainless steel pipe). You may drill through the top metalwork of your AC unit without knowing what will be drilled through below it, and you may drill into the copper coil of the condenser and damage your AC unit in this manner. As a former owner of a 1986 Freedom 30ft RV, I have bought a number of MaxxAir vent shrouds as replacement parts, and I'm convinced that the MaxxAir products are of the highest Have a safe trip and good luck.

Kadence Clements
Kadence Clements
| Jan 28, 2021
product
5/5

Exactly what I needed for my 1998 Coleman 7000 series air conditioner. Mounted right out of the box to the top of the trailer, no modifications were necessary, screw holes were oval enough to fit the trailer. You simply attach the foam baffles, or whatever they are called, to the unit, use the old screws or those provided by Maxxair, and fit it over it. I like it very much! This is a product I would recommend.

Iyla Ray
Iyla Ray
| Sep 15, 2020
That's how it should fit
4/5

The ductless air conditioner in our 1994 Fleetwood is a Dometic. I could not believe how well the cover fit. This new cover allows us to keep it in place, as well as the small solar panel we have on top of the ca/c cover for charging the engine battery. After we put on a new roof, we wanted new roof parts in order to keep it all looking nice.

Carolina Dyer
Carolina Dyer
| Oct 04, 2020
Exactly what I was looking for! I love it because it fits my Coleman air conditioner Despite not being able to locate the model number on my old air conditioner, I was able to confirm that the new one was a perfect fit through the measurements provided by the seller
5/5

Because it has slotted holes in the front, it can fit a number of As well as instructions, new lock nuts, fender washers, and foam spacers for condenser, the package contains.

Josue Mejia
Josue Mejia
| Oct 22, 2020
We have a 1997 RV that fits perfectly
5/5

As a result of our old Coleman shroud snapping in two places, I was concerned we wouldn't find a replacement because our RV ('97 Ford Fourwinds) is so old. I found it to fit perfectly and I like it a lot It was easy to line up all the screw holes. Compared to what I had imagined, this looks much better The installation took less than five minutes.

Moshe Brewer
Moshe Brewer
| Aug 05, 2020

Related Products For MaxxAir 00-325001 TuffMaxx A/C Shroud - Polar White