Hedman 21103 Reducers 3"" To 2 1/2"""
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The ones I have been using for some time now are about five inches long. This is the case, or
There is a 3 1/4 inch distance between the centers of each hole.
There was no way for me to get accurate measurements on the Chevy 350, but it fit my
Selected User Reviews For Hedman 21103 Reducers 3"" To 2 1/2"""
header cannot be bolted to the reducer tube due to its size. To use smaller diameter bolts, you will need to reduce their diameter. Additionally, the bolts in the kit are very short, and it is impossible to add lockwashers to You need to put that bolt aside and buy bolts that are a little bit smaller in diameter and a bit longer so that you can use lockwashers and so that everything is aligned for.
My search for these lead me to a review on a similar product (different outlet size) which gave it a low rating because the outer ring was not Ahead of time That's not the way things are supposed to work. There are no retaining rings on the outside of the reducer. Instead, the flat face of the reducer is what mates with the gasket. In order to attach the exhaust tubing to the reducer, welding is not necessary. All bolts and gaskets include are sufficient to access the bracket on the street and some off-road usage The highway. Anyone who needs to connect a 3" three-way to one of these should consider them To connect a 2 inch collector with a flange, bolt it on. An exhaust system with a diameter of 5".
I found it to be extremely helpful.
If it's been sealed properly for a few weeks save yourself the trouble of replacing it by buying copper or aluminum gaskets, as well as some grade 8 bolts, which will bend after a few runs and are too short to accomodate lock washers.
The fitting was bad and would not fit the supplied flange, I bought several and had to modify all of them to fit.
A 3" downpipe needed to be attached to the stock cat, and the reduction works perfectly when permanently welded to the stock cat after cutting off the old soda straw stock VW downpipe. It is very easy to install.