EZ Oil Drain Valve Adapter A-107
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
EZ-DrainTM valve EZ-DrainTM can be purchased for the recessed drain port. If you don't have a recessed drain port, select the EZ-DrainTM.
We use the part number EZ- for Suzuki engines This valve has a number 106. This A- is not what you are looking for It has been a pleasure working with
It is a yes if you are in possession of one of these. The 99 & the 100 4. Please read the following carefully. The third and fourth line of the fourth line. The 8L, 5 form of the numbers 5 and 8. Three L's and five 5's It is on line 7. It is necessary to use adapter A for 0L engines
The answer is yes. With the Camaro, the M12 becomes M13 Plug with 75 threads for draining oil. Quick and easy The following are the 107 and
Selected User Reviews For EZ Oil Drain Valve Adapter A-107
An oil pan is needed for distributing oil over the nipple. Get a short piece of tubing to attach over the nipple. Additionally, on Honda Pilots, you need an adapter extension, and even then, it failed to work without locking up against the oil pan before it was fully tightened. A couple fiber washers were sent to me by the manufacturer, so that the valve/adapter hit the oil pan before bottoming out.
I think this is an excellent product. It is not a problem. I'm not using or needing it, but it seems to be well made. I ordered the adapter because it said I would need it -- but I am not going to need it for my 11 Mac OS X Sierra.
My wife's MKX has a strut that gets in the way of the oil stream every time I change the oil. Now there is a mess on the driveway every time I do it. By directing the oil directly to a collection pan, this problem was solved. I guarantee that there is no chance for an accidental opening with the shutoff lever. Exactly what I was looking for.
In addition, The clearance may be affected by the car. Teflon tape is useful for this. This wrench measures 7/8" in diameter. There is only a little torque necessary for the motor to break. Just a little too out there. There is a problem. Plastic nipple with ID of 3/8" is attached with the 3/8" ID tube. Insert the other end of the tube into a container such as a Changing your oil doesn't need to be messy.
It was specified on the vendor's site that this item was needed to install It is actually not necessary to purchase item 2L. The adapter was ordered with the EZ-Connect It is mounted on the 107 Drain Valve and on the Hose end with a 90-degree bend. Adding the adapter to the entire setup would extend the setup by an additional 1/2 inch, but I was able to install just the drain valve and 90 degree hose ends without any issues. Ultimately, the adapter is well built, but is not necessary for GMC Sierra 6 2014. This is an application for 2L.
My name is Laura Ishak. In the end, I decided to install the drain on my wife's 2010 Cobalt, which has also been told it doesn't The answer is yes. As a result, the oil pan would not clear the valve lever in either case. In essence, the drain should be constructed with this in mind.
As per the manufacturer's recommendation, I used this with the drain valve. By using this adapter, you can use a larger O-ring Depending on the thread pitch of the drain valve and ring to seal against the pan, it may succeed without the adapter. This 2008 Silverado 5 meets the EPA's fuel economy standards.
If you want to install an EZ oil drain valve, you need this adapter. Unless I have it, the oil pan on my truck will not clear the valve. This is a highly recommended book.