Prothane 14-504 Red Front Motor Mount Insert Kit
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I didn't see that coming. There's a front mount for the motor, A frontal view. You need to buy 2 quantities of rubber to replace the rubber on the front and rear engine mounts on an Infiniti G20/P11 Primera. Definitely did and had a great time doing it!
It's not an insert, it's a solid mount, so you'll need to remove the old rubber one and press in the new one. The last time they had to be replaced was 20 years ago. There is an extreme amount of stiffness to this car, and you will notice the vehicle shaking on startup, so become accustomed to it. In the olden days, we felt motor vibrations due to soft rubber, but now you feel them when you sit.
Selected User Reviews For Prothane 14-504 Red Front Motor Mount Insert Kit
There are vibrations, though they do not seem to be too intense. There has been a small improvement in shifts and throttle response. I used a hacksaw to cut the inner ring of the stock mount, just as I did with the rear To release the tension on the ring, I bent one side of the band and hammered a small screwdriver under the cut. The inner ring was hammered out. A new mount was easily pressed into place with a c-clamp There's a clamp and a lot of grease involved.
For a 00-, these mount on the (front & rear) motor mounts I have sentra 01 in front of me. The SE 2 is also having trouble, so I put the 03 SE 4 on the.
In my Nissan Sentra SE 2005, I replaced both the front and rear engine mounts If you idle the engine, you'll notice a slight vibration but the car drives 100% better.
There was a problem with my instructions. I needed the Spec V but it was for the 350Z. In addition, lubricant is supposed to come with the model, but mine did not. Considering how well the mounts work and fit, there is not a lot to worry about. All that needed to be done was to box it up properly.
It's a good product that is easy to install, serves its purpose well, and is holding up well. I felt a little vibration at first, but I expected it to be there. The design is great as well! This website offers it for a lower price compared to most others.
Having cut out the rubber, I took the sawzall and worked my way from the inside to the outside of the first metal ring. I then pounded it out so that there would be less tension and boom, with lube it slid right in!.
This product is great. It feels like it has alot more torque than the SER rocks, and the lovers of the SER will love it.