Dupli-Color AFM0360 Dark Shadow Gray Ford Exact-Match Scratch Fix All-in-1 Touch-Up Paint - 0.25 oz.

I used this to cover up minor curb rash on my Tesla Model 3 rims with standard 18" rims.

Evie Wilkins

| Mar 20, 2021

My Tesla Model 3 stock wheels are exactly the same color as these thus, I used them for the wheels. I was able to reduce the appearance of curb rash after scraping the curb the other day with this product. I'm pleased with my performance so far.

Mauricio Espinoza

| Mar 28, 2021

Here are a few things I want to address first the packaging is an issue. Stand your paint flat on a table with the fat end down, with the label facing you and readable. Remove the top cap by unscrewing it and the brush will be facing down into the paint. Unscrew the bottom to access the foam brush with the clear coating. In order to avoid spilling paint when you open the paint with the label upside down, don't hold it upside down. It is the exact color that you need if you are repairing your Tesla Model 3 Rims. It is best to apply the paint to the scraped rim slowly to ensure a perfect repair. If you apply paint, it will look better than scrapes, but not as good as actual scrapes. The color match will be so close that you won't be able to tell it's different after you sand the flat surface with fine grit paper. Upon sanding with grits of two different sizes, I applied gray primer and let it dry for 24 hours before painting the first coat. You might want to wait a few days for the first coat of paint to dry because the second coat will tend to liquefy if you apply it If you plan to paint the interior, make sure that you are aware that the paint is actually quite thick. Due to the fact that the color and shine are so close to the original paint, I did not use the clear coat since I scraped my rim only three days after purchasing my new car. As a result of my experience using it and confirming the advice given by other users, I have compiled this. It should be noted that the paint has a pressure-sensitive tip that will apply paint by pressing the tip against the object you plan to paint. Use this product only on the inside of the tire, not the In general, thick blobs of paint are applied. There is also very little paint in the kit, so spare it as much as possible. Pictured above is the actual repaired rim, and it was pretty obvious that the damage was severe. It will not only look great, but it will also be a breeze! It is my hope that this will be helpful,.

Ella Crane

| Jul 01, 2021

In a situation where you need instructions, there are none. I'm very pleased with the product. the wheels on the Tesla Model 3 Aero. But why the hell does DupliColor do this? Is there no instruction sheet included? If you don't do a little research, it can be very frustrating. Some of the places to get into trouble are not clearly indicated, and there is no instruction. Go to YouTube and take a look at how it There is one thing you need to remember To open either end, always hold it at the fat end, point up. It is important to note that paint and sealer come in cups, and spill if the pen is not pointed Please note there are three caps on this product and two wells of paint on it. It consists of a cup of sealer on the fat end. You can use the barrel as a cup of paint two different A brush attached to a pen tip (like nail polish) is used for this. The order is as follows 1.

Subtract four from the end of the sentence Inside the box it comes in is a plastic leg that holds the pen steady. I'm in a tight spot All you have to do is nudge it until it begins to come The second paragraph. The following places are where you can open it. The sealer is located in the end cap at the fat end. The cap of the pen with the scratching tip can be removed from the narrow end, revealing the tip of the pen. On the cap below the pen is a brush, just like the one on a nail polish bottle. As its pain in the body, be sure that the pen tip is pointing up if you open it so that the contents would not 2.
Make sure all the caps are tight and shake well. I. 4. If you have damaged spots on your hands, you should use the scratch tip to clean them up. This is *br5. To remove the stain, clean the spot with alcohol on a rag, then dry it. I. Complementary content. Your spot should be painted with the fine tip of a pen or the tapered brush. The 7th point. After half an hour, let it dry. I. 8. Point the fat end toward us and open the skinny end to reveal an end cap. You can then paint some clear coat on top of that. * * Done! The next thing you should do is contact the company and ask that they include.

Azariah Briggs

| May 07, 2021

Because I didn't know how the hell to drive, I had a lot of curb rash on my rims. As a result, I sanded them down with 320 grit paper and used the touch up pen to quickly retouch The color is almost a perfect match for the existing rim. I am not sure how it looks, but I do like the way the base paint matches. I covered it up with rim guards since I probably will hit curbs more often, but I am satisfied with the way the wheels look. I have one tip for you Sanding should be done with care. I used a 5-point scale, for example If you use an inch circular power sander, and you are concentrating on the surface you are aiming for, the other end of the sandpaper might touch another part of the rim, meaning you will need to do more painting. The following tip will help you I think that sanding is a necessity, since it would make the piece look rubbish otherwise. As lazy as I am, I thought it would take forever, but it was only a few minutes per wheel when I used Handing it over to the kids would be a hassle for me. A brief update Here are a few notes on the pictures The *br- Those are the first two images after the construction was completed The start and finish of this match is very difficult to discern, partly due to the small images being displayed in this review, and partly due to the quality of the match. The idea is that. The *br- A third picture shows the damage before, but the review shows it very small, so there is no indication of the damage. There is a lot of it everywhere you look, I promise. The *br- The last picture is an after picture with the damage sanded or painted, and then a black strip of rim guard added to hide the damage.

Stevie Palmer

| Jul 11, 2021

It was awful, and I spilled paint (oil based) all over my hands. If you are going to start, I recommend reading my instructions or bringing acetone with you! There is no use for the White "legs", so it should be removed. The task at hand is more difficult than it appears. It just took a couple of snaps to remove the legs instead of having to remove the whole As the paintbrush is directly underneath the white "sander," pulling the clear top off the white one when you're done will turn the work area into a smooth surface. RESIST the urge to undo it. A light pressure is sufficient to allow the flow, but care must be taken as it will drip. Thus, be prepared to spread that pressure as soon as you apply it. In the back, again, make sure you do not overfill the barrels if the paint is in the barrels. Once you are in the clear coat, make sure you do not overfill the empty barrels. It took me so long to reorder that I wasted so much paint. If you are doing what I am doing, please do not. I only want you to do what I tell you!.

Hope Lewis

| Jun 06, 2021