SprayMax 2K Activated EPOXY Primer Black 3680034

Despite the fact that the paint is good, delivery of the can is not very good. There is not a lot of paint in the can, and the spray pattern is very broad. The spray nozzle clogs and spits at random. For safety reasons, I did not use the entire can to see if it was from the paint running out. I tried this and it didn't work, the only way to smooth is to lay it on thick, but it doesn't stop It will probably take a great deal of wet sanding, as I have not yet cleared. There is not a lot of paint in these and they are expensive. If you just bought a quart and sprayed it with a real gun, you could have saved yourself a lot of time.

Ayden Miles

| Mar 31, 2021

To refinish some chrome magazines, I used this as a base. My primary reason for buying it was that it exhibits good adhesion, but more importantly, because I use Spraymax glamour 2k clear that is also The cans I bought were both red. Both the cans shed spit and had weak propellant one had no spit or spit at all, the other had no spit at all. The worst There was nothing good about it. One can always paint two 16" wheels at the same time when I have painted dozens of It would have taken more than one can per wheel to provide adequate coverage, but at this price that ain't happening. my money thin and will hope for the best. From my reading of other reviews, it appears to be "hit or miss. " The odds are 50/50, so I guess you can say it's a A good can and a horrible can were the cans I got. This results in a 2 star rating.

Derrick DAVEY

| Aug 30, 2020

I tend to use this quickly after puncturing the lower chamber, despite what various sources will have you believe. Compared to the traditional shake, I shake less time, but with more focus. My method is to hold the can in a baton-style manner with the dot towards me, then shake it back and forth to mix the various ingredients primarily where they settle. My next move is to hit the lower button and sway the marble for another 30 seconds after the marble has been moving for about 10 When I flip the thing right side up and shake it, it will stick Next, I will weight style again for about 20 second, then spraying will begin. After the solvent evaporates, this begins to harden quite a bit, so I don't like to pause to let it cool down. All the contents of the can will be used together, as I will have everything ready before I begin. If you get too close to make up for the wide fan on this, this will go on thick. I don't want to have to deal with a partially blocked nozzle, etc.

The fan on this is pretty wide. Don't stop when you are done you can come back for another coat if necessary. In the event you apply it too thick, it may run, but it will not drip unless you stop moving immediately. In addition to scraping rust from outdoor hinges and an iron fence, I used this can for holding up some outdoor hinges. A good amount of coverage was provided. While it's an upright can, it will do just fine if you tilt it 45 degrees until most of the paint has been removed. After you get the last few grams of paint out, you will have to work on it a little. Despite the paint's longevity, the propellant lasted longer. After it dries, it looks fine and the dust as well as light objects touching it will not damage I really don't think you should After it has hardened for a day, we recommend you abuse it or sand it before abusing it. In addition to the glossy clear coat, I've also used it. There's one that goes on thicker, and if you get to it quickly, will stop you Surfaces on horizontal surfaces need to be leveled quite a bit. The video doesn't flow much, nor is it long, but it has changed my opinion of 2K versus Since it is so durable and easy to work with, I always choose 2K as I feel it is so much better than 3D. In any case, these are not water-resistant A tight fit. It is possible to have delamination when you have not prepared your surface. As it is, this would not be the best material to complete seal wood, as it would come off in the heat Bubbles are formed when gas is mixed with air. When you overbond, you will find that it had much more humidity than you expected. Any bubbles you see will also be caused by problems with the cure until it is In any case, it is recommended that this be the first layer on a clean metal surface before filler. If you do, then you can use a high-quality one Adding a layer of primer to your defects will fill both the holes and the cracks. After that, you will apply the topcoat and clear coat. In order to use polyester or fiberglass filler, you need to make sure your surface is well prepared first.

Karter Solomon

| Sep 19, 2020

It is almost exactly the same as the Eastwood product. I believe that the manufacturer is the same as Eastwood. The product has worked on almost all bare metal and some that have been lightly sanded with no issues. One important note to note when working with bare metal is make sure to perform a good metal prep, otherwise you will waste your time. I would say that about Other things to keep in mind are wax and grease removers. If you are going to paint, you need to prepare well. During the clean-up process, the interior of my truck was stripped down to bare metal, the undercarriage was greased and scuffed. This vehicle has been exposed to several corrosives like brake fluid and the urethane coating has melted off the top coat, but the epoxy primer has remained intact. This is an awesome.

Nyla Skinner

| Apr 03, 2021

Don't forget to wear personal protective equipment! This is a great product for projects that don't require much work or for amateur repairs. A clear in a can of this quality is the best you can get. If you're not going to use a gun for whatever reason, this spray can is perfect for you. The spraymax nozzle is one of the best on a spray can, so if you can't use a gun, this is the perfect spray Isocyanates are present in this product, so you must wear a respirator and full eye protection while using it.

Kira Estes

| May 07, 2021

It has been noted in other reviews that this spray can can is weak and doesn't respond at all The failing pressure was cured by pulling the caps off, re-inserting them, and then trying again. This issue has to do with the interface between the cap and the can. It was also very easy to use the whole can because I simply kept the button pressed the entire time, and even though the pressure was weak, it was consistent and I was able to use the entire product. Despite the spray spitting, I didn't experience any problems. In only one can, four 16" wheels received almost full coverage on the first coat. Take a look at the.

Carter Guthrie

| Jul 27, 2020

Due to damage to the project, I had to resand it and reprime it and will need to resand again. times, the can missed for paint and sprayed propellant only. When paint did come out, it was in globs and large drops that did not smooth out with water. Purchasing two cans made a big difference One worked well and the other was a total failure. My experience with this product was negative and I strongly suggest you look elsewhere and avoid it. I won't use this product again.

Lyanna Fischer

| Jun 01, 2021

When I began painting my car, I discovered that somebody must have previously painted it with rattle can paint. I noticed that the new paint has reacted with the old paint after the basecoat and the clearcoat. Then I sanded it down to get rid of the reacted paint, and sprayed it with this stuff twice. After laying down my metallic basecoat and clear two days later, I painted my metallic topcoat. The paint reacts zero times! The product is amazing!.

Siena Brock

| Oct 07, 2020