Speedokote DTM 2.1 voc White Urethane Primer & Sealer Gallon kit, 4:1 Mix SS-2000W/SMR-222
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The tint may contain up to 5% of urethane solvent when used with urethane solvent
There are two great uses for this product. It can be used for both If you wish to use it as a sealer, you need to mix some reducer with it for a good floor lay down. You can paint over it without sanding it down.
SMR- Yes, we have our own
The first thing I'd do is epoxy the car, then do the body work, no matter what DTM says. Make the car as straight as you can by priming and blocking it until it is. Do the body work first and then apply a coat of primer if you don't want to epoxy.
Selected User Reviews For Speedokote DTM 2.1 voc White Urethane Primer & Sealer Gallon kit, 4:1 Mix SS-2000W/SMR-222
I also used the white sealant. If you use the first activator and apply the medium wet coats as instructed, the paint goes on nice, it's glossy, it's easy to work with, it fills in minor scratches, and it doesn't run easily. In addition to the horse trailer, I am going to paint a small portion of my boat all black and I am also going to paint the trailer for my boat. I'm so happy with this paint that I will be using it for my horse trailer, my boat, and The Eastwood concourse LT 100 paint sprayer was used both outside and in my garage to apply this paint.
I apply three coats of paint at the end. On a full tank, they use about a gallon and a half You need a truck of this size.
Using a 2 ft. hose it sprays on very evenly and well even on a very rusty car, very thick stuff and very durable for sure sprayed well even over rusted parts. Use urethane reducer for the spray gun tip and slightly reduce 0 spray gun tip. It took me two coats to block sand. In a non-exhaust ventilated building, very low levels of VOC are present and there is almost no overspray. Generally well smelling, not too harsh, however, a 3M or similar cartridge mask should still be worn.
I like it a lot. The canvas is ready to be painted.
The color of my 2001 Ford F350 has been changed. It's awesome how good this primer is.
so if you mix too much and have to wait between coats of 10 to 14 minutes, you will lose what is in the spray gun, since it starts thickening and clogging that was so difficult to clean.