Carpro CQUARTZ UK 3.0_50ml Kit w/Reload - Ceramic Coating Finish, Quartz Based Nanotechnology, Bonds to Paint, Glass, Metal and Plastic

Then, you should use the product according to the instructions. It is very important to thoroughly wash the car with a good automotive shampoo first. The second step is to decontaminate the paint We recommend using Iron by Car Pro to remove embedded iron as well as other contaminants present on ALL surfaces of vehicles. The third thing you should do now is get the color correct light and check painted surfaces for Now would be the time to use a dual action buffer and some type of polishing compound on your car's paint. The paint will not look good if there are a lot of swirls, scratches, and To get rid of imperfections in your paint, you will need to compound it What good is it to put a ceramic coating on my car? "But why Patrick, I just want to have a coating put on my car? Its ceramic coating will keep your paint in the condition it is in, regardless of its age. Ceramic coatings show all type of imperfections, including swirls, scuffs, and haze. Coating your paint with ceramic will have no effect on it. If you don't want to display the imperfections in your paint over the next 12 months, then do not paint over them. If the paint is not corrected within 24 months, you will need to replace it. Finally, you will also need to remove any residual polish, compound, oils, and any other materials which may be interfering with the ceramic coating after the paint is defect free. Use Geyon Prep, Carpro Eraser, or an IPA solution and water to remove carcinogens. The goal of this will be to remove waxes, compounds, and anything else that became deposited on your paint during the correction process. The coating can only be applied now, and only now, can we even begin to think about it. If possible, keep your vehicle out of direct sunlight, preferably in the shade but also away from possible contaminants, such as bugs, pollen, and dust. If you have a garage, make sure it has good ventilation. Please take caution As a result you should avoid breathing in the coating fumes as they can pose health risks. To apply the coating, make sure that it is well-draining It's best to work in a ventilated space. You might be able to use a well if you don't have access to one To protect your respiratory system, I suggest wearing a respirator or dust mask in a ventilated area. Now that your car is clean and the paint is defect-free, and you are in a dry, warm environment, there is no need to do extensive detailing. As long as you have a ventilated area and no bugs or other contaminants, you are ready to start applying Use the applicator bar that comes with the enclosed applicator sheets along with the applicator bar. Four drops are dispensed from the bottle once it's opened Take five drops of the fluid and apply it to the with the roof since it is usually flat and free of crazy contours. Make a small section of 3 feet by 5 feet by 2. 5 feet by 3 feet. Those dimensions are 4 feet x 3 feet It is 4 feet long. Ensure that you wipe the horizontal surface with straight, overlapping lines from left to right to make sure that the entire surface is covered. After this, run vertically in the same area using a similar pattern. Therefore, you can rest assured that your coverage is complete and has no gaps. The steps should be taken slowly, methodically, until they are all completed. As a result of the temperature of the area you are working in, how long you must wipe away excess coating before the coating begins to cure depends on the temperature. The best rule of thumb would be to wipe off the treatment area as soon as you finish applying it. If you do it this way, you won't make any mistakes. After wiping a surface for a long time, you will notice that it is becoming tacky. This means you have waited too long and need to reapply the coating. Make sure you keep a number of microfiber shorts Have fiber towels available that you don't intend to use on your car and are willing to throw away as they will never be used If you use the towel to wipe a treated area, flip it frequently. Following the treatment and cleansing of the previous area, move on to the next one. If there are dark spots on your work, it could be that you have applied too much coating. Check your car for spots that lack coverage and dark spots after the whole car has been treated. You should apply more coating where it is lacking and remove the dark spots with a damp cloth. In the meantime, I recommend you avoid driving your car for the next two In case you have no other option, do not get the car wet for at least the first 24 hours. We can negotiate! Wipe any moisture from the car as soon as you get it wet so that the curing process is not compromised. Once you've let the car sit for 48 hours, it's time to take it out for a spin. But My personal practice is to let the coating cure for four full days, then coat a second time with product, after which I wait for a full five days before removing the car from We now know what the results are As a result- I am speechless! There's another caveat to be aware of Even after the ceramic coating has been applied and fully cured, you are not finished! My friend, you need to take special care of the coating to ensure that it will last. Do not wash your car for the first week after treatment because this can ruin it. The last thing you want to do is wash the car. To avoid damaging the coating, you should use a ceramic enhancer like Car Pro Reset Intensive Care shampoo. After you have applied the Reload, you will need to apply it frequently to replenish the ceramic coating's silica content. As long as you keep the coating in good condition, it will last for 12 years I am 24 months old. It does not give you permission to neglect your paint merely because you have this coating. Leave the coating to dry and you will have to buff off the entire coating and start all over again due to imperfections caused by tree sap, pollen, and bird poop! IF that I highly recommend.

Orlando Lawson

| Dec 10, 2020

The car looks amazing! There is no fee for this, so this isn't for casual detailers. As a result, I had to fight my paint relentlessly throughout the entire process. Below is a detailed account of the 8+ hour process I went through. 1.

With some elbow grease and good old WD40, I removed any major defects (mostly glue residues). Please see
1. 1. Removed most of the wax from the car (used a pressure washer with a foam cannon) 2. Removed the remaining wax with Dawn soap. I sprayed some Iron X on the car while it was still moist. Then I washed it off after 5 minutes. Once the car was clean, wash it again as normally with a PH-balanced car shampoo (I used Chemical Guys Black Light)

5. As soon as I had soapy hands, I clay bared the car, washed and dried it. This is 6. We used a paint prep spray for each part of the car. 7 Minor blemishes have been corrected on the hood and quarter panels (swirl marks). After spraying denatured alcohol on the car and wiping it down, I worked on it for nine minutes. The applicator of the carpro Cquarts is incredibly small, so I had to apply the product in small sections (2 feet by 2 feet around). Once it had dried for about 30–45 seconds, buff it off with a towel. Look at the results, they look great. Bringing out the color in the right way with a nice wet look. A couple days from now, I will apply the reload included in the release. In any case, if there is interest and you are willing to put in the hard work, then go ahead. It will amaze you to see the results.

Cayden Gentry

| Sep 05, 2020

In order to properly apply the product to my paint (as recommended by Pan the Organiser on YouTube), I followed these steps 1.

Two buckets of water to clean the car, including using an iron
2. Rinse with X and then rinse again. 3. Place the entire clay bar on the screen. When necessary, combine with dual-based compounds This action machine is number 4. The paint needs to be polished
5. A wipedown of the IPA is part of step 6. A fine application of the product in 2'x2' sections should be done. The 7th point. Clean off with a damp cloth. You can use the included Reload to spray and wipe off*9. The result has been amazing in terms of hydrophobicity. I let it bake for 12 hours in my garage. I got heavy rain about three days after I did the last step, but my car looks great and feels great. I was able to get it off easily and reload helped the paint shine and deepen. The car will be washed with CarPro Reset before I use Reload. I will report back if any changes occur regarding the coating after it lasts the full 3 years.

Sage Peterson

| Aug 08, 2021