Spray max 2K Clear Coat Semi Matte
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As a commercial auto paint in a can, this is what this is like. This chemical set is made up of two parts. Take a look at what clear coats on autos can do on YouTube. Yes, I would say. The sun breaks down epoxy to powder, so it is fine as long as it is not epoxy. We are not dealing with epoxy here. I wish you the best of As a top coat on aluminum, it covered metal spray paint that was not a two-part water-based paint, and as such, was soft and easily scratched. It was much stronger after the clear coat and I was happy I was able to pull out the bigger spray equipment to do the job. It might be necessary to use two cans if you plan to build the wall higher. You might be successful if you try hard enough. Unless the rims are naked, you will have a lot of masking.
It is likely that you have installed your cabinets in an area with high humidity (e.g. ) Wood typically shrinks and expands, so a flexible top coat is essential to avoid surface cracks. A clear coat this durable will last for years to come. Fuel and a wide variety of solvents are not resistant to it. In addition, it is very hard. I do not think that it would hold up well on wood, but it is ideal for automotive applications. This should be of some assistance.
Rather, you need to sand your surface and apply a direct to metal primer before the clear coat, as the clear coat must have something to "bite" into.
The answer is yes It stops catalyzing if it is placed in the freezer. It will spray better if it is warm. By doing this, I have had liquid cans that have stayed liquid for weeks.
Selected User Reviews For Spray max 2K Clear Coat Semi Matte
There is no doubt that this stuff works. The Hot Rod Satin Black and this Semi matte clear coat are the paints I used for my Harley's tank and both fenders. I was thrilled with how it turned out. As I mentioned, I have read comments about splatter or drops from the can on your project. On my project, I had no issues with any paint or drops I only had a few drops of clear coat. Fortunately, it was on the top of the fender at the place where the seat goes, so it wasn't too bad. As I was holding the can to paint that part of the fender, I probably had my hand on the anke. I am very satisfied with the overall outcome. The price was a little high, but it was well worth the money. Oh, one more thing the gloss was mentioned in one of the reviews. As a result, the can actually says "clear satin" when you order a semi-matte. It seems that the "matte" description may be a little Even though I thought the wrong can came to me, I was able to use it and was glad that When you want matte, you should order the basic matte, whereas when you want a little sheen, a low gloss, you should order the semi matte, or the clear satin, since that is This is for anyone who might need it.
I have revised It seems that the white buildup on the frame is the result of the can leaking. Spritzing what was left allowed me to hope for the best. The same review was cited by multiple other users. In order to save me time and money, I am now going to wet sand the white areas. The original review is as follows The product was purchased to complete a project and ended up ruining it. It ate through the paint and crushed It is impossible for me not to be disappointed and upset at this moment. This was a complete bust and a complete waste of time!.
However, I did not find what I was looking for in the semi matte. As far as 2k high is concerned, I've used it There was an excessive amount of gloss that made the car stand out from the rest of the fleet. Apparently I bought the semi matte this time and it is too matte for my taste. I'm not sure if there's an in-between option, but if there is, I would like to purchase it. If not, I'll probably just get the high gloss and then sand the surface a bit. You should wear a mask while using this stuff! The product is really toxic, but it's not unusual for modern products to be toxic If you know that it will work, you're sure it will.
In the past, I had only purchased semi-commercial versions of Spraymax 2k After reading the reviews, I became concerned that the reviews were divided. There were two kinds of consumers regarding the product One loved it and the other hated it for one As the sky turned cloudy/milky, it turned cloudy. The product was a five star product. But it did not perform as I expected it to. So, I took a chance and purchased it. On a steel bumper that I used it to paint in gorgeous weather, I found the following results At 68 degrees and low humidity, it is a pleasant day. Before applying the semi-transparent top coat, I allowed the base coat to dry for one hour There are two types of clear coats glossy and matte. After filling in the holes in the roof, I applied three coats (waiting 10 minutes in It is light in the first and second coats and slightly thicker in the third coat. I added a nice semi-gloss finish to it and it looked fantastic There is no sheen to it. In order to cure the bumper in the UV rays, I left it to dry for one hour prior to putting it in the sun. There was no particular area where the spots occurred. There were random spots like those found on Leopards, and they appeared Thankfully, there are positive aspects to this report This brand of spraymax products makes excellent products! I've used the clear glamour in the past, and I had There is a semi-automatic The matt laid down well, and had a nice semi-matte finish There was no shine to it once dry, and it seemed durable. It has been a while since I used 2K matte. Fool me once shame on you. I will sand again, apply base coat, and use 2K matte this time. If I am deceived twice, I should be ashamed!.
Since I started spraying lacquer on stringed instruments 15 years ago, I've become an expert. It is almost never that I use rattle cans (and now I know why), but I bought it for a one-time use A repair job has been put off. As soon as the finish is used, it splatters. It appears there is no way to prevent it from spitting hardened finish onto your second or third I've had horrible experience with spraying out of cans unevenly. There's a lot of noise coming out of it. In order to back up the can, you back it There are times when it sprays unevenly and in a light way. The 48 hour shelf life not only sounds ridiculous, it is also unrealistic. Okay, I see what you mean. Although I can't really be critical of them for it as a chemical thing , you still gotta clear your schedule in order to be sure that whatever you're spraying gets sprayed before the entire
I am of the opinion that this is not what we wanted. HVLP is the way to go for me.
Resistant to gasoline and easy to apply. There is no sprayer on a rattle can that I have used better than this one. Having a clean area (preferably paint booth) and good preparation would greatly reduce the likelihood that you would notice any difference between this can and normal higher quality paint guns. As soon as the clear coat is fully cured, it is very durable and resistant to most automotive chemicals (oil, gas, brake cleaner).
As this was recommended for a long lasting clear coat, I decided to give it a go. On a motorcycle frame I'm restoring, I applied the contents of two cans (which equated to two coats), and both of them were cloudy. It must have been a mistake when I applied it, so I ordered more. On the same frame, but in every coat, in different areas, it had the same cloudy finish. Sprays nicely, lays down easily, and is SUPER durable, as I've had to sand, re-apply the black basecoat, and have to re-apply this crap three times already. The finish on all three cans is random cloudiness regardless of the can. It needs to be sanded AGAIN, so I'm going to do that. My plan is to redo it with Krylon clear lacquer, which I've used before with stellar results, for 1/4th of the price. *Hopefully it's just an old or faulty batch I received. Last but not least, tossing out a can and a half.
There was a sloughing off of clear coating on the top tube of my bike. It is unclear why this is happening. Wet/dry sanded with some 800 grit sheet and opted to try this product after hearing it was highly rated. A number of passes were made. After a day, I went back to it. This seems to be a brand-new item. What if I have to use this stuff in 48 hours? It will take a few hours to activate, so plan ahead.
Related Products For Spray max 2K Clear Coat Semi Matte
