Restoration Shop / Custom Shop - UR70 Medium Urethane Reducer (Gallon) for Automotive Paint and Industrial Paint Use - High Performance Automotive Grade
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Nothing short of a hassle when I ordered this but didn't receive it from the company. If you can't find it elsewhere, find another source
This paint should work with all Urethane paints
In order to get a finished mix, you need 4 parts paint and 1 part reducer (so if you use 4 ounces of paint you need 1 ounce of reducer).
It's too late for me to help. Consider the answers others have provided to similar questions.
Selected User Reviews For Restoration Shop / Custom Shop - UR70 Medium Urethane Reducer (Gallon) for Automotive Paint and Industrial Paint Use - High Performance Automotive Grade
I would buy it An A+ grade. I used this to mix my paint and it worked great. Presented (in this order) are the following images 1.
Finished by sanding the factory clear to 400*2. The repair and primer areas of the bungalow
3. (4) After 1st base paint (wa8867 / gm code 96) 5. The 2nd base coat followed by the 5th. This is after the 3rd base coat. There were no issues at all after applying 3 coats of SpeedoKote 2 part clear. Painting with 2 part urethane, 2 part clear coat, and HLVP for the first time. I've found finding a place to paint to be the hardest part of this entire project. To avoid leaves/bugs/dirt, you'll most likely want to be indoors (or as I did, you could move into my apartment. A half-assembly of plastic is hung on the wall of the garage).
The painting was done in high humidity (plus or minus 5%) The dew point is at 45 degrees for 85% of the days. Air temperature and temperature in the room. A temperature of 55 degrees is acceptable. In my shop, I'm going to paint my dash panel on my 1957 Chevy. *An interview had been scheduled At the H, use a disposable air drier to dry the air. It looks like the paint work was applied with a paint gun, and dried in the right place. I would not normally paint under those adverse conditions, but since I had to replace a bad gauge in my instrument panel this spring and will be changing the color of the car this summer, I wanted to get a head start on getting the interior color changed so it The area was small enough for me to be able to sand it back down if it went wrong. As I didn't have any issues, I am planning to paint the rest of the interior this winter and have the new interior installed by the time I paint the outside of the car in the Using a 4 as a reducer, it gave the desired result as follows With 1 part of this reducer, you can harden 1 part of paint.
The reducer in this instance is for coatings for automobiles. The paint can be thinned with this product and cleaned up with it as well. It was a positive situation in this case, but the packaging/shipping was not up to scratch. A box of material with some puffy plastic bags was placed inside the can of material. Due to the fact that the can was dented upon arrival, it was clearly dropped or thrown.
Mixing U- and U- It is lined with poly Raptor. I used it to thin out spray paint for truck rockers.
These products from restoration shops appeal to me. The problem is. You need to buy the gallon, it's only a couple more dollars. You have a good chance of getting sick if you use these things It will be of great use to you.
I am very happy with this.
It saves me a lot of money over buying duracoat reducer when cleaning up duracoat.
- We use them for homemade items in The product is in line with our expectations.