* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
Bg109 Bg EPR Engine Performance Restoration 11 Fl Oz From the Makers of 44k

Bg109 Bg EPR Engine Performance Restoration 11 Fl Oz From the Makers of 44k

Bg109 Bg EPR Engine Performance Restoration 11 Fl Oz From the Makers of 44k
$ 17.25

Score By Feature

Based on 751 ratings
Value for money
8.69
Mileage
8.28

OveReview Final Score

How Our Score Is Calculated

Product Description

Softens and dissolves deposits from piston rings that are difficult to remove
The engines are powered more efficiently and are more powerful
Keeps oil from leaking out too much

Questions & Answers

What are you going to do with ?

After 15 minutes of running at 1200 rpm's, let the engine cool. Continue with the oil change as usual once the engine has been turned off.

Can I use the 109 on my engine even though I have only 56000 miles on it?

In short, yes. Without a doubt. A representative of mine in BG. In her statement she states, "If you wanted to use it, you could do so at every oil change beginning at 5,000 miles.". In my experience, it only really makes sense to do it every 15,000 miles

Do you know how many miles the truck has?

Taking your vehicle engine apart completely is the only way to find out if it contains sludge. You should use an oil cleaner such as BG EPR on a regular basis to clean your oil. It is not uncommon to see engines that require oil changes after 3000 miles and after adding As the oil turned black, it became thick and sticky.

the date at the bottom of the can has expired when I ordered my latest order of EPR. ?

A can's bottom is labelled with a date representing the date of production, not the date of expiration

Selected User Reviews For Bg109 Bg EPR Engine Performance Restoration 11 Fl Oz From the Makers of 44k

The directions provided by the government are easy to follow
4/5

Despite all the user tips I have seen, nobody seems to bother to read the instructions printed on the can itself This product must be used in accordance with the following directions The 11-'s have been added A crankcase with a capacity of 6 quarts/liters. During the first 10 minutes at 1200 RPM, warm up the engine, bring it to operating temperature, and then run the engine for at least 10 minutes at 1500 Engine is to be shut off, oil drained, and old oil filter removed. Replacing the oil filter and drain plug and adding new oil will result in better engine performance. If your engine has an excessive amount of sludge, avoid using it.

Jeremiah Watson
Jeremiah Watson
| May 23, 2021
I really like how it worked for what I was looking for
5/5

As of today, I've now used this product exactly 3 months since I used it for an oil change, and I can report that it actually works, at least for the purpose that I used it. In my wife's 2010 RAV4, I had to top off the oil between oil changes because it was burning a bit of oil. The Toyota engines can do this (burn oil), but it is not due to excessive In this case, it seems that carbon forms on the piston rings, making oil able to pass through. In this carbon formation, 99 percent of the carbon is hard. It doesn't seem to work with 9 percent of the products that claim they will remove it. Nevertheless, I would like to say this Then I changed the oil and left the stuff in the engine for about 20 minutes, and tried to bring the RPMs up to the specifications of the directions. Perhaps I could have ran it a little longer in the engine, but it seems to have been in for a reasonable amount of time. I. *. Explanation. There is no escaping the reality Back in April, I used this to check the oil level, and just one day later I used it again to check It would appear that the dipstick is reading about 1/4-inch One quart of oil was below completely full, which is probably because I did not completely fill up the tank when I changed the oil. It is also important to mention that I haven't added any oil to this car for three whole months, and it gets a lot of use (it The sum of the parts is that there isn't much oil burned if any at all. I think some have considered the price to be too high for this product. You can damage the engine if you run out of oil and damage it. This will cost thousands of dollars if it has to be.

Kellan Patrick
Kellan Patrick
| Aug 05, 2020
It is okay for the dealer to kiss me
5/5

My 2007 F150 5 had cam phasers that needed to be replaced, and Chalmers Ford Albuquerque New Mexico told me I needed to replace them. Triton 4 is to the right. Since I'm a woman, I have no trust in mechanics since they all think women are dumb and don't have any knowledge about cars. My truck has never had a code on it EVER, so I knew it wasn't the cam phasers. There were no codes which would come up on the car and I was positive that didn't mean anything to the cam phasers! In my quest for an answer, I left that dealership shaken and baffled and began my driving away from the dealership. There is a YouTube video where a mechanic recommends BG products to help with various issues but he speaks about a crazy idle that does not respond to anything My problems with the truck happened exactly the same way as they did with the 150. In view of the fact that I was already getting an oil change, I decided to purchase this product and apply it. Due to the weather in Albuquerque being in the 30s and 40s in December and January, it was suspected it was a gummy or varnished VCT solenoid. The temperature in my truck rarely dips below 60 degrees since I live in Arizona. The directions stated that I should add this item as soon as I entered the parking lot of an automotive shop in Marana, Arizona. I ran it until it reached the proper running temperatures, then I went over and had them change the oil. It took me two days to figure out that the problem had been solved, and the cost of the oil change, including the labor, was.

Salem Walls
Salem Walls
| Mar 09, 2021
Is it possible that the engine will need to be rebuilt? Over the past few months, my car has been burning about a quart of oil every 300 miles
4/5

It could be an oil ring that is stuck or a valve seal that has failed. There doesn't seem to be any oil being burned. Be sure to follow we should change our oil twice in one week. The total cost was about $60, which includes MOA after treatment, 2 cases of oil, 3 new oil filters, shipping, tax, etc.

Update It took about 2 months for it to restart burning oil. It's as if the aftereffects have started There is some cure stuff that keeps the fire from burning, but it does not There have only been about one or two. The vehicle still consumed only 5 quarts of oil over 1200 miles, which is still an A final update has been provided In addition to changing rings and valve seals, other things have also been This product is definitely effective for cleaning your engine, but a simple cleaning won't fix broken parts in my case.

Ayan Carney
Ayan Carney
| Oct 08, 2020
Amazing! Thank you so much! My garage is full of sports cars, so I bought an older 2006 Jeep Liberty to keep in it as a daily beater
5/5

There was a lot of love to be given. I got everything working and it began to leak oil, a quart per tank of gas. I replaced bulbs, coolant, filters, etc.
Once it was running I noticed a noticeable increase in oil consumption. Having been disappointed, I felt let down. This is how I tried it out. The manner in which it was used was I sat and watched all the fresh oil drain out to the dark following an oil change. Installed new oil and filter and the difference is amazing! I am thrilled with how much more torque it has and how much better it runs. There is now no oil in this machine! In this way, the rings were able to seal By maintaining higher cylinder pressure, more torque is generated, and this helps keep the oil rings working properly. The experience was more than satisfactory. I am thrilled it is now.

Mckenzie Dawson
Mckenzie Dawson
| Nov 04, 2020
A magic trick
5/5

There is something about this stuff that really The manufacturing company that sells this product knows two of my brothers who deliver auto repairs to high end foreign automobiles. It was hard for me to believe. The 2007 Mercedes CLS-500 was my first time using it The car has an almost ninety thousand mile mileage and is in pristine condition. While starting up, the car would emit smoke from time to time. It was mentioned to me that this is common because of carbon build up on the piston rings (running it short distances without high revs and probably a lower fuel temperature). As directed, I used it and it worked. During my test drive, I noticed no more smoke, and the engine runs quieter and smoother. The system impressed me in my 2012 Chevy Tahoe, which has right at 100,000 miles on it. don't think I can believe I'm saying this, but it runs smoother and accelerates better with less lag. One of the things it must do is clean push rods and valve tranes, as well as.

Kamari Lam
Kamari Lam
| Aug 06, 2020

Related Products For Bg109 Bg EPR Engine Performance Restoration 11 Fl Oz From the Makers of 44k