Liqui Moly 20132 Radiator Stop Leak, 0.25 l, 1 Pack
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There were enough bottles in the 10 gal system to fill four
To find a simple ratio, follow the steps below. Coolant in a batch of 10 liters can be treated with 150 ml of product. 228 ml treats 15 people, so 228 ml is the equivalent of 15 applications. Coolant in the amount of 2 liters (4 gallons).
The semi truck I own is being worked on
Selected User Reviews For Liqui Moly 20132 Radiator Stop Leak, 0.25 l, 1 Pack
There were a few drips of coolant on the floor of my garage when I looked for my turbo/ECU/cold air box. It was likely that there were AC lines under the engine in this area, and I thought it was possible I sprung a leak in one of them. My next step was to look under the car, and I saw where the coolant drip would occur, it was coming from a strange spot, the K frame that holds up the engine. I then used a flashlight to check the source of the leak it was coming from the aluminum engine block. In the same spot, there was a drippy triangle of coolant that was dried up. The gasket on our engine is broken. OH NO! This means my engine has a blown head gasket. Having known this Audi A4 2 for years, I know it. Engine seals were blown on a 0T FSI since it runs hot, but I didn't expect it to be so hot. Despite my best efforts, I was disappointed. Now that I have started researching, I am going to write. There is a lot of discussion on the Audi forums, as well as After some consideration, I decided to go with Liqui Moly because it is known to perform well in The cooling bottle is just what I needed. I followed the instructions with the install, and everything seemed to go smoothly, no coolant dropped on the garage floor. That was a great solution! About a month later I found another small leak on the garage floor, so obviously the bottle of Liqui Moly Radiator Stop Leak worked, but the hole in the seal in the engine was too large to be fixed with a bottle. Adding a second bottle wasn't a big deal! This is the second part of the sentence Within three months, the ground is no longer wet from the leak on the floor. The engine temperature is also The engine sealant did not harm the thermostat or any other part of the engine. In the automotive world, Liqui Moly may be tailored to the Euro Car market, as it is manufactured in Germany. That is true, and I can confirm There is no doubt in my mind that I'm pleased with this. As a recommendation, I would say.
This was just a temporary fix until summer to put off taking out the intake manifold, but this thing sealed the deal. During my time at work, I have worked. My experience in auto parts goes back over a decade, I have acquired an ASE parts pro certification, but I have never endorsed a stop leak product before as they normally cause major problems. I will be switching to liquid moly over the next couple.
It occurred at the radiator that there is a leak, which will leave a puddle in the driveway. I prepared to remove the radiator and replace all the hoses. I would have had to spend several days and several dollars if I had done it myself, let alone hired a I put a full bottle of Liqui Moly in the car, drove it for over 30 miles, and the leak stopped entirely. My observation was that the drip gradually went from constant to intermittent to no drip after the formula was applied In summary, I am very pleased with this product. I would buy more in the future, but I am certain that these products will not have a very long shelf life.
Thank you to whoever invented it! ).
I could not figure out where the leak came from, but I could hear it in my right ear. It was important that I didn't put just any stop leak on my system, because that could mess up your cooling I did a lot of research on this stuff, and it claims to be the best for European cars so I gave it a go. I did not see anything for the first few days, but after about a week I did not see any more puddles. Despite the fact that neither the puddle nor the coolant have disappeared, I still have full coolant. There is a similar stuff called gluing which is also claimed to be harmful to.
I am amazed at how well it works. The radiator in my house was cracked, and I couldn't afford to fix it. My radiator was bought from a seller on amazon and installed by a radiator company. The cost for everything still amounts to about $800. It seems I bought a leaked radiator when I thought it was a brand new one. There is no way I can return it because it's in my car, and I cannot It is too late now. I have a full radiator reservoir every two days, so I'm broke. Having drank one bottle of this the following day There was not a drop of water. It is important not to open your radiator cap as it will change the pressure differential and you will need to add another sealant bottle. We recommend asking someone who knows what your problem is if you do not know what it Purchase 2 It is a good idea to have these 3 bottles.
My favorite Liqui Moly products are always my first choice, but in this case the radiator sealer did not work on plastic parts of the radiator as had been advertised by the manufacturer. I also would like to clarify that there are residues in the reservoir that indicate the sealer worked on the radiator. Anyway, I do not recommend Liqui Moly's sealant it needs to do better with it.
There is no better product than this. In my Audi A6 Avant 3, I had a leak. A total of 0T was performed, as well as a brand new replacement coolant pipe. Job that costs a lot of money. The leak reappeared less than a year later. As opposed to investing the time and resources, you can try this product out for free. There will be no more leaks! This gives me more time to complete the repair but I will likely still need to repair it.
It didn't work on a hairline crack in the radiator for me. I suppose it is worth a try, but ultimately I find it a waste of money.
Related Products For Liqui Moly 20132 Radiator Stop Leak, 0.25 l, 1 Pack
