Tusk Handlebar Risers 7/8" Bars, 30mm Height -Fits: Kawasaki KLR650 1987-2015
Score By Feature
OveReview Final Score
Questions & Answers
As long as your bars are 7/8" in diameter, akx100 should work, but I have no idea what it is
YES, these will work with your Suzuki DRZ400SM model from 2006. The following is a transcript of the discussion - ATV that is no longer attached to the ground
Hello Kyle, thank you for reaching out to us here at Unhinged ATV with your question. Based on the manufacturer's instructions As long as your bar size falls within the 7/8" qualification, you will not encounter any problems with your model. It would also eliminate the need for cable extensions. Any other questions you might have can be directed to us by email. Robert Massey thanks you for your kind words Unhinged
You can install them on any handlebar with a 7/8" diameter. All that is left is to determine if the cables will be long enough for the bars to be raised that high.
Selected User Reviews For Tusk Handlebar Risers 7/8" Bars, 30mm Height -Fits: Kawasaki KLR650 1987-2015
I have purchased these risers for my 2007 KLR 650 and they work perfectly. as if I was leaning too far forward before using these risers. They allow me to sit up straighter, which makes handling easier and fatigue less of an issue. In addition, I've always been told to sit up straight by my mom, so it's a win-win The winning team.
A 2009 CRF230F with aftermarket Protaper bars (* 50mm wider than the stock Honda bars) was equipped with these. The wider bars and 30mm rise made standing on the dirt bike much more comfortable, but the throttle stuck during full right turn stops thanks to the combination of wider bars and 30mm rise. It ended up being an issue on a tight switch back. You don't need to In any case, I kept my protaper bars, but switched out these 30mm risers for 15mm risers, and it solved the throttle sticking problem. This will be good for your clavicle!.
There are a few tight wires for the ignition if you look up at them. For taller riders (6'2", here), this greatly increases the comfort of the WR250R's ride. Now that I am standing comfortably, I feel better. There may be a little tightness with the ignition wires if you have bark busters, but it can probably be fixed by resetting Putting wires in the right place.
To fit my Suzuki V-Star 2007 I purchased these bar risers It is an 650 Strom. No issues were encountered during installation, and no modifications were needed to the bike, as far as cables are concerned. Anyone can do the install because it probably only takes 15 minutes. At this price, I'm extremely happy with this purchase, and I highly recommend it. I've seen other bar risers that offer more adjustments with the bars, but at this price, I'm amazed by this purchase.
The going is tough. I am very pleased with the product, and the installation was easy. These solid billets of CNC'd billets are difficult to imagine having an issue with. Follow these tips Make sure all cable runs are slack enough to handle the extra rise. My clutch cable on my KLR-1000 doesn't have enough slack to handle the extra rise. A 650 is considerably shorter now, so it needs to be replaced in order to avoid pulling during hard or extreme low-speed turns There is no need to turn the speed up.
In a matter of 15 minutes or less you can install this product and it performs exactly as described. This raised the bars nicely on my 2017 crf250l, there are no wires or lines to worry about, and standing on it is much more comfortable. I definitely recommend it.
It is easy to install. Some of the people like them on some of the Facebook forums, so I thought I'd share. I finally decided to give these a try after a long ride back to San Luis Obispo and forth to see if they could help me relax my arms & my shoulders It's right here. It's hard to justify spending more than $30 on something that's so cheap? Upon arrival, they were in a hurry. They're quite clear and easy to follow. Spacers are included if you need them (I didn't need them). A little blue 242 was dabbed on the threads, and it took 20 minutes to complete the process. The closer I've brought the handlebars to my chest, the more comfortable I feel! So, yes, I would recommend these for anyone whose riding position needs to be adjusted upward a bit.
I had to use longer bolts for my bike, as stated in some of the other reviews. After drilling and tapping the risers for my bike, I had to buy longer bolts and buy longer bolts to install the risers properly. This is the setup I use on my pitbikes I have been pleased with their performance once they were installed. They gripped the bars well and haven't moved since. I'm impressed with the improvement in ride comfort. It's been a hard ride for me as well. Although they had to be modified a bit, the price was well worth it.