7443 strobe led brake light bulbs (Set of 2) will flash at the start of braking mode to inform and alert drivers as well as to stop and remain stable steadily while in operation (Legal blinking times) in order to avoid rear-end accidents with vehicles.
A 7440/7443 strobe brake led bulb with 39 high quality, high power 2835 chip LED lights, 360-degree full angle illumination with a projector lens design that provides 360 degree full angle illumination with a 360 degree full angle illumination.
A big difference between the high and low intensity light output of the T20 7443 dual filament, and it replaces the rear 7440 7443 brake stop light, the center high mount stop (third brake) light, etc.
A length of about two feet is required. The diameter of the tire is 9.9 inches. The cross reference number for these is 992, 7440, 7440LL, 7440ST, 7441, 7443, 7443LL, 7443ST, 7444, W21W, etc
The product comes with a one-year warranty. It is compatible with both the standard type and the The device is powered by 12V - 24V and features an IC driver with a long operating life.
Questions & Answers
Do I need to replace the red or white bulbs on my brake taillamp assembly that is already red? When you look at the red taillamp assembly, which one would shine brighter?
My opinion is that it won't make a great deal of When I have put colored bulbs in brake light assemblies, they have turned out great. The only problem is that all of them are still They are brighter than stock bulbs, I have bought the red ones. *br>One thing is for sure if you crack an assembly, the last thing you want is a white LED light on the brakes
Do you know if this method will work with a Honda Civic Ex?
The reverse light in your Honda can be fitted with many different size bulbs. By using the original bulb part number, you can determine the bulb size required.
Are there any benefits to using the white one as reverse lighting?
The reverse light bulb size in your stock reverse light needs to be 7440/W21W, so please see your owner manual or the stock lamp for confirmation before purchasing, or contact us directly if you need assistance by advising your vehicle's maker, year and model. I appreciate your help.
All of my taillights, brake lights, and turn signals are all the same What are the chances this bulb will ?
Although I am not sure that my vehicle has separate brake and turn signals, I do know it comes with a
Selected User Reviews For Alla Lighting T20 7443 7440 LED Strobe Flashing Brake Lights Bulbs Super Bright 2835 SMD 12V Dual Filament 6000K Xenon White Blinking Stop Lights for Cars, Trucks 7441 7444 7442
During installation there were some minor injuries There needs to be more slack on the wire leads to facilitate installation
This is an installation on a Subaru Outback 3 from 2005. This is 0. It is important to know that the bulb can only fit in one direction into the socket. A bulb positioned wrongly will no longer be securely seated in a socket, but will simply fall out if you don't notice it right away. Reverse it and try it that way if it didn't snap into place. As soon as the light is installed, make sure you press the brakes to see it turn on. like the 3 flashes that appear when you step on the brakes for the first time. On my cyclops light many years ago, I installed a module that flashed about seven times before it went My belief is that this has enabled me to avoid many problems in the future The most common type of accident is an ender accident. With only a little trouble, I managed to install the new bulb on the passenger side of the vehicle. There is very little slack in the wire leads from the connector on the driver's side, so minor damage was required to get into the driver's side. In my efforts to remove the connector harness, which was attached to an unnecessary plastic extension, to free up some space, I broke the extension, which was attached to the connector harness. Embracing the new, larger bulb in the hole was a bit easier with the wire angled a bit more. Initially, I debated holding the bulb partly in the hole and then attaching the connector, but I couldn't help but envision losing control of the bulb while trying to seat it and having it fall into the lens and then not being able to pull it out without taking out the If I had to pay an extra two cents for an extra wire on the connector, I would have spent $25. The back of my first thumb knuckle on my right hand is bleeding slightly from a sharp edge that cut the skin.
| Oct 03, 2020
Driving is just a little safer with this device! It does a great job! I think it has been doing a good My attention is captured by blinking lights more than anything else, so I imagine it'll also make sure drivers who are less attentive notice it too
When you hit the brake, the light blinking continues for the duration of the brake press. As advertised, it does what it is supposed to do.
This is a much brighter light bulb than stock ones
In addition, I purchased the hyper white strobe brake lights because the lenses are already tinted red at the factory so it was just a matter of adding light for safety reasons. The bulbs on my 2008 Honda Civic SI coupe were switched and matched exactly to the original fittings. As you first apply the brakes, the strobe effect is about twice as bright as it is on a regular brake, which is a major attention grabber and a safer feature. It makes sense to me. I've been in accidents with a rear end twice in the last 3 years, so this is a good preventative measure.
| Jan 19, 2021
Unfortunately, this is not a good product
I installed these on my truck and although they work, my truck keeps telling me "check rear right/left signal bulb" when I turn the turn signal on. The Alla L program has been installed. On other parts of my truck I have used these D lights and they work well, so I thought the tail lights would be a great addition. There are no differences in brightness between these and my factory, but the purpose of purchasing them was to warn people when turning and merging. I appreciate the fact that the break applies a few times while it is still being applied as a.
| Apr 17, 2021
This is an extremely simple to install product
An upgrade like these is really cool. During my 2013 FJ Cruiser's maintenance, I noticed the rear brake light wasn't working. I don't have super handy skills but I watched a YouTube video that demonstrated how to change it myself, so if I could do it, so can anyone. I want to thank you for such an incredible product thus far, and love the strobe effect.
| Jan 12, 2021
Those behind you may find this confusing
People behind me thought it was confusing. My tail lights didn't work the first day I had them
Someone told me there's something wrong with them.
| Jun 19, 2021
Lighting of the highest quality
Fantastic customer service, what more do I need to There's no need to look any further than The company sent me a Christmas card even though I hadn't purchased anything from them for months.
| Jun 01, 2021
I'm very excited! I was amazed at how bright these bulbs were
It is important to note that these have the "F1 race car flash" to them, since they flash rapidly 5 times for a short time before staying in steady once you apply the brakes, just as in F1 racing.
| Apr 11, 2021