R W Beckett Corp 4504 KING Oil Tank Gauge
Score By Feature
OveReview Final Score
Questions & Answers
No, the shorter version of this gauge is required. That one is available on our site if you search for "The Fuel Minder Store." Then select Direct Reading Gauges from the drop-down menu.
I have no idea, but I'm guessing it's because diesel (heating oil) is a petroleum product. gasoline is kept in a similar manner.
The number 4504 is invalid. It is necessary to use a custom gauge. Call us at the Fuel Minder Store if you have any questions. 860 310 4097 is the telephone number to call. This is something for which we can provide assistance.
My tank has a capacity of 275 gallons. The float barely fits inside the elongated tank, which is filled to the brim with gallons. It's unlikely to work in such a small space.
Selected User Reviews For R W Beckett Corp 4504 KING Oil Tank Gauge
If you follow the instructions, it's simple to put together. LISTEN TO THE INSTRUCTIONS AND FOLLOW THEM! It really works. Before I installed this gauge, I used my "measuring stick" to determine that I was at half tank. It showed that I was at half tank once it was installed, and it is clearly descending as we burn oil. It eliminates the need for a service technician to come in and install the system. The only thing you'll need that isn't included in the kit is some sort of thread sealant, though I don't see why teflon tape wouldn't suffice as long as you screw the gauge in tight. To tighten the bolts, you'll need an adjustable wrench or channel locks.
It went off without a hitch. Our old float for our 275 gallon Salon oil tank broke and was extremely difficult to remove. We were fortunate to have two different-sized capped openings. I used a 2in opening away from the oil fill inlet, thread sealer, and an 18in long adjustable plumbers wrench to tighten it up. I don't think any other wrench will work because they're so tight on them. The plastic bubble (as shown in my photo) easily screws off with your hands, allowing you to tighten the new float down properly. If you don't unscrew the plastic bubble and lift the rods up, you won't be able to tighten them without damaging the new assembly on the tank's sides. If the tank is completely empty, the rods should be almost vertical, so you may not need to unscrew the bubble.
Replaced a broken unit in our Oil Tank with ease. Our broken meter could be replaced for $180, according to the furnace repairman. I told him no, and with a simple pipe wrench, I removed it, applied sealant to the threads, and screwed in a new one, carefully inserting the level meter without damaging it and tightening it so the arm extends the length of the tank, not into its side. after the next fill up, adjust the height level to full. br>NOTE: THIS PAGE HAS BEEN UPDATED. The float is now full of oil after a year. Beckett has not yet responded. In the meantime, I drained the oil from the float and used Blue Gasket Sealer to seal it. That should keep it safe for the rest of its life, but the float should never have been exposed to oil in the first place. pathetic. br>Recent changes: Becket informed me that it was too bad, and that the warranty was only for 18 months. As a result, I'm going to give it a two-star rating. The plastic float needs to be reconsidered. Although the RTV Gasket Sealer will last a lifetime, it was not required.
It's a good deal and it works. Just make sure to read the instructions on the side of the box, which state that you should pull the red tab all the way up during installation on a full/partially full oil tank. Real men don't follow instructions! br>br> Having said that, if you're looking for a unique way to express yourself After destroying the first one during installation, the second one I purchased worked perfectly when I followed the instructions to the letter. br>br>The unit's only flaw was due to my oversight.
It's a Tank Gauge, that's what it is. It's an excellent piece of writing. Fits heating oil tanks with capacities ranging from 275 to 550 gallons. Simply follow the instructions; the float must float (duh) and not come into contact with the tank sides after installation. It is the installer's responsibility to complete the task correctly. It replaces one that was shattered by a falling branch. Because it was in the tank when I bought the house, the one it replaced had to be at least 10 years old. I don't see why it wouldn't last 20 years as long as the seals hold up and it remains waterproof.
I've run out of oil on several occasions in the last few years. My very old tank is outside, and after further investigation by myself and a local HVAC company, we discovered that my line inside the tank was not long enough. As a result, we relocated the line, and the problem was solved. I came here looking for a simple way to check the fuel level because you can't do it by eye. br>This simple gauge was perfect for the job; I bought it in December of 2014 and haven't run out of oil since. br>As a general rule, when I'm down to just under 1/4 tank, I place a delivery order. For my 275 gallon tank, it's perfect. br>br>update 2/22/2016*** 16 months later, it's still going strong. I've noticed that the plastic vial and o-ring aren't the same size. The weathering of the rings has begun. However, Amazon sells replacements. In the spring or summer, I'll examine them to see if they need to be replaced or if they can be left alone for a while. Inside the vial, the small red indicator has faded from red to almost clear. When you look at it, however, you can still see the associated oil level. This gauge has saved my life on numerous occasions. Since I installed this, I've never run out of oil. br>It has already made a profit. br>br>update 1/2/17***in October of 2016, I noticed that the gauge was reading EMPTY, despite the fact that my fuel oil provider had delivered oil to my tank. According to other reviews, oil gets into the float and causes it to sink, resulting in an inaccurate reading. This failed after less than two years from the time of purchase. There's no point in filing a claim with the company because this gauge is no longer under warranty, and I don't want to buy another one because it will fail in the same way. br>I've bought a long measuring stick and will use it to take measurements the old-fashioned way. This product has left me very disappointed.
I removed the 2" x 1/4" reducer bushing from the tank because I was concerned that the gauge's installed height would interfere with the lever at full volumes if the bushing remained in the tank. Installed the gauge with the plastic cover off and properly aligned the gauge lever with the long length of the tank so it wouldn't jam up. Between the lever assembly and the bushing, there is a gasket, and between the lever assembly and the plastic cover, there is another gasket. Everything was fine after I installed the cover. br>JJK.
It's simple to install, but keep in mind that you'll need to remove the gauge housing and hold the float while twisting down. Remember to double-check that you have the correct one for your tank's size; if you're unsure, you can measure it or look it up online.
Related Products For R W Beckett Corp 4504 KING Oil Tank Gauge
