* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black

Viair 92820 6 Port Manifold with Mounting Holes , Black

Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black Viair 92820 6 Port Manifold with Mounting Holes , Black
$ 27.76

Score By Feature

Based on 237 ratings
Packaging
8.20
Customer service
8.21
Satisfaction
8.31
Giftable
8.51

OveReview Final Score

How Our Score Is Calculated

Product Description

By entering your model number, you can make sure that this fits.
There are six 1/4" NPT ports on this machine.
Mounting Bracket Is Included As Well As Hardware
A Perfect Match
One-Year Limited Warranty

Questions & Answers

Is it possible to run it on diesel?

I don't think there's any reason why it shouldn't be done. You should be able to run fluid through it because it's just an aluminum manifold. I'm going to use it as an air compressor.

Is it necessary to use a stainless steel braided leader when attaching to the on-board system?

It is not necessary to use stainless braid. Simply use a high-quality rubber air hose with factory-installed connectors.

How far apart are the outlet holes on the center line?

1" in the middle.

Is it suitable for use as a grease?

I'd double-check with the vendor, but given that it's made of metal, I don't see why it wouldn't. You'd be pushing a lot of oil, and I'd imagine the viscosity of the oil and the equipment you're using to push it would both play a role. The oil should be pulled. Have you checked to see if there is anything specifically designed for oil?

Selected User Reviews For Viair 92820 6 Port Manifold with Mounting Holes , Black

WAY OUT OF SPEC, and completely useless
3/5

For my Trucks OBA system, I purchased this. When I'm offroad, I use it to run my ARB lockers and air up my tires before returning to the highway. br>It would have been ideal to use this block to power my 120/150 pressure switch, remote air gauge, 175 pressure release, and type m quick release. only to discover that all of the 1/4 NPT ports are WAY out of spec (tapped WAY too small). I tested over a dozen 1/4 NPT fittings from various brands and discovered that the best of them could only thread in between 1/8 and 1/4 inch. 1/4 of a turn (this included VIAIR-supplied fittings). I understand that VIAIR is manufactured in China, but I had hoped for some sort of quality assurance from them. This block has no value at all. I'll be returning this to find a block from someone else (I wish Amazon allowed us to rate with 0 stars), but that's a discussion for another day.

Felicity Swanson
Felicity Swanson
| Oct 20, 2021
There must be a counterfeit
3/5

I've previously purchased these from Summit Racing, but this Amazon item is unique. br>br>There wasn't a single port that was correctly tapped. It can only take a half-turn at most. br>There is a difference in the material. br>Every corner is sharp and not rounded. br>And if you look closely, the mounting holes are so close to the edge that the washer hangs off the side. br>br>Either they outsource this part to some scumbag or this is a knockoff. br>br>The mounted manifold in the photo is one year old and in perfect working order. br>br>Absolute failure. I'm returning every Viair part I bought on Amazon because I don't trust the pressure switch. br>br>UPDATE: I returned this part and ordered the same part number from Summit Racing. They are diametrically opposed. From the threads to the finish edges, the part from summit is 100% perfection. Either Summit has out-of-date stock or the Amazon part is a knockoff.

Roland Rosales
Roland Rosales
| May 09, 2021
The detachable mounting bracket is ideal for a variety of applications
5/5

This D- is ideal for my purposes in attaching it. firmly barricade to I bought this to make a distribution manifold for my pond aeration system. The heft and build quality of this part surprised me, and the threading is deep, clean, and tight across all 6 ports on mine. So don't sweat it if you have to go after them yourself to get your gear to fit and work properly. The detachable mounting bracket is ideal for a variety of applications. This D- is ideal for my purposes in attaching it. Block the compressor cabinet with a strong block. As a carpenter, I'm confident that rigging this to a rolling hot dog or any other high-volume compressor onsite for the crew would work just as well. The front-facing 14-inch outlet ports are wide enough to accommodate four large quick-connect cables. Couplers can be connected in a straight line with ease and without frustration. I also appreciate having two side ports, one for an inlet and the other for a teed-up port. In my application, I have PRV and Gauge setup. There isn't any way back. Another plus for me is the lack of a USB port, which I've always found to be a pain but which eventually gets plugged in anyway. Wouldn't it have been nice to have a 38" inlet port to add some extra air volume? Sure, but since most "portable" compressor equipment outlets are now 14"NPT, it's a moot point and not worth criticizing the product for. However, because this is a 1/4" setup, I wouldn't use it to distribute air in an automotive shop or an industrial application that requires constant air volume over 5cfm across multiple tools at the same time. br>However, if you require something that can handle a large number of nailers or a few air-powered tools, This thing is a winner in my book and is built like a tank, with lines for a pond aeration system. It wouldn't be a review if I didn't point out a flaw, so I suppose having a second mounting point for the back-up camera would be a plus. It would be better if you could fix the plate so it can't move at all, but that's just a nit. picking.

Lorelei Brooks
Lorelei Brooks
| Apr 19, 2021
I needed something that was well-machined, compact, and exactly what I got
5/5

The manifold I received was within advertised specifications, unlike some of the other experiences described in these reviews. br>It was well packaged, with each Allen screw, washer, and nut contained in its own sealed bag. The coating is consistent throughout the manifold and completely covers it. 1/4 NPT fittings threaded in smoothly and to the correct depth, with two wraps of teflon sealing tape around the threads. For those who want to use it as an OBA (On Board Air) manifold and store ARB locker solenoids. The manifold is small, and the holes are too close together for two ARB solenoids to be installed side by side. At least one hole must separate them on each side. My setup was as follows (looking at the manifold from left to right): ARB solenoid 1 | in-line 1/4" NPT hex plug | side hole closed with 1/4" NPT hex plug | in-line 1/4" NPT hex plug Side hole fitted with 90* fitting for air supply | cab pressure gauge hose fitting | ARB solenoid 2 | air pressure regulator
In summary, this is a good product that will serve 100% of my needs.

Matthew Bennett
Matthew Bennett
| Dec 14, 2021
It appears to be well-made when done incorrectly
3/5

This part, like others, was improperly threaded. Even after chasing and bottoming out a tap in it, I couldn't get a 1/4 npt fitting to turn. To try to fix it, I cut off the end of the tap, but I couldn't rethread any of the other holes. I squandered my money on this product and an attempt to repair it with a tap. Apart from the wrongly threaded holes, it appears to be of good quality. br>br>Edit/update: br>br> I eventually found a better tap that allowed me to properly tap out the threads and use it. I still wish it had been made properly right out of the box.

Azariah Hinton
Azariah Hinton
| Jun 19, 2021
It's quite effective
5/5

My faucets worked well. I was able to fit four ball valves on them, but I had to disassemble two of them and remove the stems in order for the valve bodies to clear each other while screwing them in. It was also necessary to mount the valves at an angle so that the levers would clear each other, as well as to grind the bottom of the lever at an angle. Overall, I'm pleased with it. I'm using it as a vacuum manifold to distribute vacuum on my vacuum table because it's so small.

Nina Munoz
Nina Munoz
| Jan 15, 2021
My threads are in good shape
5/5

Yesterday, I got my manifold. The first thing I did was double-check the threads after reading a few other reviews that said theirs weren't threaded correctly; mine are. As for the product itself, I haven't installed it yet (but will tomorrow), but it appears to be solid enough, with all ports threaded properly and no obvious flaws. I'm using it to extend air to the other end of my agricultural building and have a port or two left over for other things near the end, where I'm usually working. If any problems with the product arise after installation, I will update my review.

Leona Conrad
Leona Conrad
| Jul 10, 2021

Related Products For Viair 92820 6 Port Manifold with Mounting Holes , Black