Trkimal Centrifugal Go Kart Clutch 3/4" Bore 10 Tooth 10T Fit for #40/41/420 Chain 6.5HP - Upgrade Clutch Compatible with Predator GC160 GC190 GX120 GX140 GX160 GX200, Go Kart Fun Kart Mini Bike
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I bought this clutch for a monster moto 80cc minibike with a 5/8" bore 35 chain. Be sure you check the dimensions of the clutch you have and make sure it fits your minibike. Ensure that the specs are in line with the manufacturer. This is probably going to
If you want to use a clutch, you will need an adaptor sleeve with keyway according to the shaft size. Have the crank replaced with one that does not have a taper. It is possible to have a local shop machine the crank for a
Would be, but would also require the motor to turn in the opposite direction. How should you turn around, clockwise or counterclockwise
The holes are pre-drilled and a set screw is included
Selected User Reviews For Trkimal Centrifugal Go Kart Clutch 3/4" Bore 10 Tooth 10T Fit for #40/41/420 Chain 6.5HP - Upgrade Clutch Compatible with Predator GC160 GC190 GX120 GX140 GX160 GX200, Go Kart Fun Kart Mini Bike
The 212 I have is jetted, has a staged header exhaust, a 308 cam with 8 degree timing advance, does not have a governor, has a billet flywheel, 22lb valve springs, and chromoly rods. A head gasket for the 009 engine. The Spark plug is a Pulstar spark plug, and the Magneto is a high drag one. The stock is far from being available. About forty pounds of force were no problem for this clutch Before the metal housing cracked, 50 hours of punishment had been inflicted. During this time, I have bought two other clutches of different brands and one of them has cracked in the same spot as well and the other is awaiting the same outcome. There is no doubt that this design is bad regardless of the brand. A friend of mine has the same setup and only has 2 shoes in his clutch, not 3 as mine does he’s never had any issues. There is no structural problem with his, he is about to go out due to worn shoes. If you have aftermarket parts, I would recommend that. Their prices on BMI karts range from 60 to 80 dollars You will know when one of these dies when your motor dies. There is a complete breakdown of the cluch. On the back, the triangular shape looks like it's missing a fin a bit. Despite the fact that his clutch has begun to lag and make noise, it still runs fine. The site has seen 130 to 140 visitors so far The number of hours worked is 150.
On the mini bike, it was used on the predator 212 engine.
Additionally, it smoked like all hell for the first five minutes. I have no idea why it did this, but it no longer does. The product was a fire hazard, and it would be wise to replace it. Last time, I did not have this issue since I used max torque. I'll keep it updated as time goes on as there must have been a sample error.
We are waiting for the In the first unit, the drum was fitted on the assembly crooked, and closer inspection revealed that the hole was a bit too small, causing it to run into the assembly. There's a chance I could repair it, but I don't want to take a chance. It has already been delayed once, so once Amazon gets to me with the replacement, I will update the review.
It is based on Campbell I had to do a second installation because the coleman BT200 didn't fully fit. Despite the size of the shaft, the gear wasn't right. The gear from the old clutch could be swapped over so there was no need to return it. You may also note that this clutch has a brass bushing inside, as opposed to Obviously, that is important if you care.
I would buy it It was easy to install on gocart and had no problems. I recommend it, and I will buy it.
I used it in my 212 predator motor and it fit perfectly.
I bought a clutch for a good price. The quality is excellent, and I received it very quickly.